add more time out

.github/actions/spell-check/expect.txt

@@ -22,6 +22,7 @@ ADate
 ADDSTRING
 ADDUNDORECORD
 ADifferent
+adjacents
 ADMINS
 adml
 admx
@@ -98,6 +99,7 @@ ASYNCWINDOWPLACEMENT
 ASYNCWINDOWPOS
 atl
 ATRIOX
+ATX
 aumid
 authenticode
 AUTOBUDDY
@@ -214,10 +216,8 @@ cim
 CImage
 cla
 CLASSDC
-classguid
 classmethod
 CLASSNOTAVAILABLE
-claude
 CLEARTYPE
 clickable
 clickonce
@@ -256,6 +256,7 @@ colorhistory
 colorhistorylimit
 COLORKEY
 colorref
+Convs
 comctl
 comdlg
 comexp
@@ -276,7 +277,6 @@ CONTEXTHELP
 CONTEXTMENUHANDLER
 contractversion
 CONTROLPARENT
-Convs
 copiedcolorrepresentation
 coppied
 copyable
@@ -292,6 +292,7 @@ cpcontrols
 cph
 cplusplus
 CPower
+cppcoreguidelines
 cpptools
 cppvsdbg
 cppwinrt
@@ -320,7 +321,7 @@ CURRENTDIR
 CURSORINFO
 cursorpos
 CURSORSHOWING
-cursorwrap
+CURSORWRAP
 customaction
 CUSTOMACTIONTEST
 CUSTOMFORMATPLACEHOLDER
@@ -343,14 +344,12 @@ datareader
 datatracker
 dataversion
 Dayof
-dbcc
 DBID
 DBLCLKS
 DBLEPSILON
 DBPROP
 DBPROPIDSET
 DBPROPSET
-DBT
 DCBA
 DCOM
 DComposition
@@ -368,7 +367,8 @@ DEFAULTICON
 defaultlib
 DEFAULTONLY
 DEFAULTSIZE
-defaulttonearest
+DEFAULTTONEAREST
+Defaulttonearest
 DEFAULTTONULL
 DEFAULTTOPRIMARY
 DEFERERASE
@@ -390,19 +390,14 @@ DESKTOPVERTRES
 devblogs
 devdocs
 devenv
-DEVICEINTERFACE
-devicetype
-DEVINTERFACE
 devmgmt
 DEVMODE
 DEVMODEW
-DEVNODES
 devpal
-DEVTYP
 dfx
 DIALOGEX
-diffs
 digicert
+diffs
 DINORMAL
 DISABLEASACTIONKEY
 DISABLENOSCROLL
@@ -545,6 +540,7 @@ fdx
 FErase
 fesf
 FFFF
+FInc
 Figma
 FILEEXPLORER
 fileexploreraddons
@@ -565,7 +561,6 @@ FILESYSPATH
 Filetime
 FILEVERSION
 FILTERMODE
-FInc
 findfast
 findmymouse
 FIXEDFILEINFO
@@ -667,14 +662,13 @@ HCRYPTPROV
 hcursor
 hcwhite
 hdc
-HDEVNOTIFY
 hdr
 hdrop
 hdwwiz
 Helpline
 helptext
-hgdiobj
 HGFE
+hgdiobj
 hglobal
 hhk
 HHmmssfff
@@ -750,9 +744,9 @@ HWNDPARENT
 HWNDPREV
 hyjiacan
 IAI
-icf
 ICONERROR
 ICONLOCATION
+icf
 IDCANCEL
 IDD
 idk
@@ -843,8 +837,8 @@ jeli
 jfif
 jgeosdfsdsgmkedfgdfgdfgbkmhcgcflmi
 jjw
-jobject
 JOBOBJECT
+jobject
 jpe
 jpnime
 Jsons
@@ -888,7 +882,6 @@ Ldr
 LEFTALIGN
 LEFTSCROLLBAR
 LEFTTEXT
-leftclick
 LError
 LEVELID
 LExit
@@ -931,9 +924,9 @@ LOWORD
 lparam
 LPBITMAPINFOHEADER
 LPCFHOOKPROC
-lpch
 LPCITEMIDLIST
 LPCLSID
+lpch
 lpcmi
 LPCMINVOKECOMMANDINFO
 LPCREATESTRUCT
@@ -949,7 +942,6 @@ LPMONITORINFO
 LPOSVERSIONINFOEXW
 LPQUERY
 lprc
-LPrivate
 LPSAFEARRAY
 lpstr
 lpsz
@@ -959,6 +951,7 @@ lptpm
 LPTR
 LPTSTR
 lpv
+LPrivate
 LPW
 lpwcx
 lpwndpl
@@ -1002,22 +995,20 @@ mber
 MBM
 MBR
 Mbuttondown
-mcp
 MDICHILD
 MDL
 mdtext
 mdtxt
 mdwn
 meme
+mcp
 memicmp
 MENUITEMINFO
 MENUITEMINFOW
 MERGECOPY
 MERGEPAINT
-Metacharacter
 metadatamatters
 Metadatas
-Metacharacter
 metafile
 mfc
 Mgmt
@@ -1046,7 +1037,6 @@ mmsys
 mobileredirect
 mockapi
 MODALFRAME
-modelcontextprotocol
 MODESPRUNED
 MONITORENUMPROC
 MONITORINFO
@@ -1090,9 +1080,9 @@ MSLLHOOKSTRUCT
 Mso
 msrc
 msstore
-mstsc
 msvcp
 MT
+mstsc
 MTND
 MULTIPLEUSE
 multizone
@@ -1102,11 +1092,11 @@ muxxc
 muxxh
 MVPs
 mvvm
+myorg
+myrepo
 MVVMTK
 MWBEx
 MYICON
-myorg
-myrepo
 NAMECHANGE
 namespaceanddescendants
 nao
@@ -1247,8 +1237,10 @@ opencode
 OPENFILENAME
 openrdp
 opensource
-openurl
 openxmlformats
+ollama
+onnx
+openurl
 OPTIMIZEFORINVOKE
 ORPHANEDDIALOGTITLE
 ORSCANS
@@ -1464,6 +1456,7 @@ rbhid
 Rbuttondown
 rclsid
 RCZOOMIT
+remotedesktop
 rdp
 RDW
 READMODE
@@ -1492,7 +1485,6 @@ remappings
 REMAPSUCCESSFUL
 REMAPUNSUCCESSFUL
 Remotable
-remotedesktop
 remoteip
 Removelnk
 renamable
@@ -1526,8 +1518,8 @@ RIGHTSCROLLBAR
 riid
 RKey
 RNumber
-rollups
 rop
+rollups
 ROUNDSMALL
 ROWSETEXT
 rpcrt
@@ -1765,7 +1757,8 @@ SVGIO
 svgz
 SVSI
 SWFO
-swp
+SWP
+Swp
 SWPNOSIZE
 SWPNOZORDER
 SWRESTORE
@@ -1784,7 +1777,8 @@ SYSKEY
 syskeydown
 SYSKEYUP
 SYSLIB
-sysmenu
+SYSMENU
+Sysmenu
 systemai
 SYSTEMAPPS
 SYSTEMMODAL
@@ -1888,9 +1882,9 @@ uitests
 UITo
 ULONGLONG
 Ultrawide
+ums
 UMax
 UMin
-ums
 uncompilable
 UNCPRIORITY
 UNDNAME

.pipelines/v2/templates/steps-esrp-signing.yml

@@ -2,6 +2,9 @@ parameters:
   - name: displayName
     type: string
     default: ESRP Code Signing
+  - name: timeoutInMinutes
+    type: number
+    default: 90
   - name: inputs
     type: object
     default: {}
@@ -12,6 +15,7 @@ parameters:
 steps:
   - task: EsrpCodeSigning@6
     displayName: 🔏 ${{ parameters.displayName }}
+    timeoutInMinutes: ${{ parameters.timeoutInMinutes }}
     inputs:
       ConnectedServiceName: ${{ parameters.signingIdentity.serviceName }}
       AppRegistrationClientId: ${{ parameters.signingIdentity.appId }}

installer/PowerToysSetupVNext/CmdPal.wxs

@@ -18,7 +18,6 @@
         <RegistryKey Root="$(var.RegistryScope)" Key="Software\Classes\powertoys\components">
           <RegistryValue Type="string" Name="Module_CmdPal" Value="" KeyPath="yes" />
         </RegistryKey>
-        <RemoveFile Id="RemoveOldCmdPalMsix" Name="Microsoft.CmdPal.UI_*.msix" On="install" />
         <?if $(sys.BUILDARCH) = x64 ?>
         <File Id="Microsoft.CmdPal.UI___var.CmdPalVersion_._x64.msix" Source="$(var.CmdPalBuildDir)AppPackages\Microsoft.CmdPal.UI_$(var.CmdPalVersion)_Test\Microsoft.CmdPal.UI_$(var.CmdPalVersion)_x64.msix" />
         <?else?>

installer/PowerToysSetupVNext/Product.wxs

@@ -146,7 +146,7 @@
       <Custom Action="UnRegisterCmdPalPackage" Before="RemoveFiles" Condition="Installed AND (NOT UPGRADINGPRODUCTCODE) AND (REMOVE=&quot;ALL&quot;)" />
       <Custom Action="UninstallCommandNotFound" Before="RemoveFiles" Condition="Installed AND (NOT UPGRADINGPRODUCTCODE) AND (REMOVE=&quot;ALL&quot;)" />
       <Custom Action="UpgradeCommandNotFound" After="InstallFiles" Condition="WIX_UPGRADE_DETECTED" />
-      <Custom Action="UninstallPackageIdentityMSIX" Before="RemoveFiles" Condition="Installed AND (REMOVE=&quot;ALL&quot;)" />
+      <Custom Action="UninstallPackageIdentityMSIX" Before="RemoveFiles" Condition="Installed AND (NOT UPGRADINGPRODUCTCODE) AND (REMOVE=&quot;ALL&quot;)" />
       <Custom Action="UninstallServicesTask" After="InstallFinalize" Condition="Installed AND (NOT UPGRADINGPRODUCTCODE) AND (REMOVE=&quot;ALL&quot;)" />
         <!-- TODO: Use to activate embedded MSIX -->
       <!--<Custom Action="UninstallEmbeddedMSIXTask" After="InstallFinalize">

installer/PowerToysSetupVNext/Resources.wxs

@@ -367,12 +367,6 @@
         </RegistryKey>
         <File Id="BgcodePreviewHandler_$(var.IdSafeLanguage)_File" Source="$(var.BinDir)\$(var.Language)\PowerToys.BgcodePreviewHandler.resources.dll" />
       </Component>
-      <Component Id="CmdPalExtPowerToys_$(var.IdSafeLanguage)_Component" Directory="Resource$(var.IdSafeLanguage)INSTALLFOLDER" Guid="$(var.CompGUIDPrefix)23">
-        <RegistryKey Root="$(var.RegistryScope)" Key="Software\Classes\powertoys\components">
-          <RegistryValue Type="string" Name="CmdPalExtPowerToys_$(var.IdSafeLanguage)_Component" Value="" KeyPath="yes" />
-        </RegistryKey>
-        <File Id="CmdPalExtPowerToys_$(var.IdSafeLanguage)_File" Source="$(var.BinDir)\$(var.Language)\Microsoft.CmdPal.Ext.PowerToys.resources.dll" />
-      </Component>
       <?undef IdSafeLanguage?>
       <?undef CompGUIDPrefix?>
       <?endforeach?>

src/common/Themes/theme_listener.cpp

@@ -16,50 +16,13 @@ DWORD WINAPI _checkTheme(LPVOID lpParam)
 
 void ThemeListener::AddChangedHandler(THEME_HANDLE handle)
 {
-    std::lock_guard<std::mutex> lock(handlesMutex);
     handles.push_back(handle);
 }
 
 void ThemeListener::DelChangedHandler(THEME_HANDLE handle)
 {
-    std::lock_guard<std::mutex> lock(handlesMutex);
     auto it = std::find(handles.begin(), handles.end(), handle);
-    if (it != handles.end())
-    {
-        handles.erase(it);
-    }
-}
-
-void ThemeListener::AddAppThemeChangedHandler(THEME_HANDLE handle)
-{
-    std::lock_guard<std::mutex> lock(handlesMutex);
-    appThemeHandles.push_back(handle);
-}
-
-void ThemeListener::DelAppThemeChangedHandler(THEME_HANDLE handle)
-{
-    std::lock_guard<std::mutex> lock(handlesMutex);
-    auto it = std::find(appThemeHandles.begin(), appThemeHandles.end(), handle);
-    if (it != appThemeHandles.end())
-    {
-        appThemeHandles.erase(it);
-    }
-}
-
-void ThemeListener::AddSystemThemeChangedHandler(THEME_HANDLE handle)
-{
-    std::lock_guard<std::mutex> lock(handlesMutex);
-    systemThemeHandles.push_back(handle);
-}
-
-void ThemeListener::DelSystemThemeChangedHandler(THEME_HANDLE handle)
-{
-    std::lock_guard<std::mutex> lock(handlesMutex);
-    auto it = std::find(systemThemeHandles.begin(), systemThemeHandles.end(), handle);
-    if (it != systemThemeHandles.end())
-    {
-        systemThemeHandles.erase(it);
-    }
+    handles.erase(it);
 }
 
 void ThemeListener::CheckTheme()
@@ -85,51 +48,13 @@ void ThemeListener::CheckTheme()
 
             WaitForSingleObject(hEvent, INFINITE);
 
-            auto _appTheme = ThemeHelpers::GetAppTheme();
-            auto _systemTheme = ThemeHelpers::GetSystemTheme();
-            
-            bool appThemeChanged = (AppTheme != _appTheme);
-            bool systemThemeChanged = (SystemTheme != _systemTheme);
-            
-            if (appThemeChanged || systemThemeChanged)
+            auto _theme = ThemeHelpers::GetAppTheme();
+            if (AppTheme != _theme)
             {
-                AppTheme = _appTheme;
-                SystemTheme = _systemTheme;
-                
-                // Copy handlers under lock, then invoke outside lock to avoid deadlock
-                std::vector<THEME_HANDLE> handlesCopy;
-                std::vector<THEME_HANDLE> appThemeHandlesCopy;
-                std::vector<THEME_HANDLE> systemThemeHandlesCopy;
-                
+                AppTheme = _theme;
+                for (int i = 0; i < handles.size(); i++)
                 {
-                    std::lock_guard<std::mutex> lock(handlesMutex);
-                    handlesCopy = handles;
-                    if (appThemeChanged)
-                    {
-                        appThemeHandlesCopy = appThemeHandles;
-                    }
-                    if (systemThemeChanged)
-                    {
-                        systemThemeHandlesCopy = systemThemeHandles;
-                    }
-                }
-                
-                // Call generic handlers (backward compatible)
-                for (const auto& handler : handlesCopy)
-                {
-                    handler();
-                }
-                
-                // Call app theme specific handlers
-                for (const auto& handler : appThemeHandlesCopy)
-                {
-                    handler();
-                }
-                
-                // Call system theme specific handlers
-                for (const auto& handler : systemThemeHandlesCopy)
-                {
-                    handler();
+                    handles[i]();
                 }
             }
         }

src/common/Themes/theme_listener.h

@@ -3,7 +3,6 @@
 #include <windows.h>
 #include <iostream>
 #include <vector>
-#include <mutex>
 
 typedef void (*THEME_HANDLE)();
 DWORD WINAPI _checkTheme(LPVOID lpParam);
@@ -15,7 +14,6 @@ public:
     ThemeListener()
     {
         AppTheme = ThemeHelpers::GetAppTheme();
-        SystemTheme = ThemeHelpers::GetSystemTheme();
         dwThreadHandle = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE)_checkTheme, this, 0, &dwThreadId);
     }
     ~ThemeListener()
@@ -25,20 +23,12 @@ public:
     }
 
     Theme AppTheme;
-    Theme SystemTheme;
     void ThemeListener::AddChangedHandler(THEME_HANDLE handle);
     void ThemeListener::DelChangedHandler(THEME_HANDLE handle);
-    void ThemeListener::AddAppThemeChangedHandler(THEME_HANDLE handle);
-    void ThemeListener::DelAppThemeChangedHandler(THEME_HANDLE handle);
-    void ThemeListener::AddSystemThemeChangedHandler(THEME_HANDLE handle);
-    void ThemeListener::DelSystemThemeChangedHandler(THEME_HANDLE handle);
     void CheckTheme();
 
 private:
     HANDLE dwThreadHandle;
     DWORD dwThreadId;
     std::vector<THEME_HANDLE> handles;
-    std::vector<THEME_HANDLE> appThemeHandles;
-    std::vector<THEME_HANDLE> systemThemeHandles;
-    mutable std::mutex handlesMutex;
 };

src/common/utils/package.h

@@ -2,7 +2,6 @@
 
 #include <Windows.h>
 
-#include <algorithm>
 #include <appxpackaging.h>
 #include <exception>
 #include <filesystem>
@@ -338,30 +337,6 @@ namespace package
                     }
                 }
             }
-
-            // Sort by package version in descending order (newest first)
-            std::sort(matchedFiles.begin(), matchedFiles.end(), [](const std::wstring& a, const std::wstring& b) {
-                std::wstring nameA, nameB;
-                PACKAGE_VERSION versionA{}, versionB{};
-
-                bool gotA = GetPackageNameAndVersionFromAppx(a, nameA, versionA);
-                bool gotB = GetPackageNameAndVersionFromAppx(b, nameB, versionB);
-
-                // Files that failed to parse go to the end
-                if (!gotA)
-                    return false;
-                if (!gotB)
-                    return true;
-
-                // Compare versions: Major, Minor, Build, Revision (descending)
-                if (versionA.Major != versionB.Major)
-                    return versionA.Major > versionB.Major;
-                if (versionA.Minor != versionB.Minor)
-                    return versionA.Minor > versionB.Minor;
-                if (versionA.Build != versionB.Build)
-                    return versionA.Build > versionB.Build;
-                return versionA.Revision > versionB.Revision;
-            });
         }
         catch (const std::exception& ex)
         {

src/gpo/assets/PowerToys.admx

@@ -1,11 +1,11 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!-- Copyright (c) Microsoft Corporation.
      Licensed under the MIT License. -->
-<policyDefinitions xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" revision="1.19" schemaVersion="1.0" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
+<policyDefinitions xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" revision="1.18" schemaVersion="1.0" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
   <policyNamespaces>
     <target prefix="powertoys" namespace="Microsoft.Policies.PowerToys" />
   </policyNamespaces>
-  <resources minRequiredRevision="1.19"/><!-- Last changed with PowerToys v0.97.0 -->
+  <resources minRequiredRevision="1.18"/><!-- Last changed with PowerToys v0.96.0 -->
   <supportedOn>
     <definitions>
       <definition name="SUPPORTED_POWERTOYS_0_64_0" displayName="$(string.SUPPORTED_POWERTOYS_0_64_0)"/>
@@ -27,7 +27,6 @@
       <definition name="SUPPORTED_POWERTOYS_0_89_0" displayName="$(string.SUPPORTED_POWERTOYS_0_89_0)"/>
       <definition name="SUPPORTED_POWERTOYS_0_90_0" displayName="$(string.SUPPORTED_POWERTOYS_0_90_0)"/>
       <definition name="SUPPORTED_POWERTOYS_0_96_0" displayName="$(string.SUPPORTED_POWERTOYS_0_96_0)"/>
-      <definition name="SUPPORTED_POWERTOYS_0_97_0" displayName="$(string.SUPPORTED_POWERTOYS_0_97_0)"/>
       <definition name="SUPPORTED_POWERTOYS_0_64_0_TO_0_87_1" displayName="$(string.SUPPORTED_POWERTOYS_0_64_0_TO_0_87_1)"/>
     </definitions>
   </supportedOn>
@@ -339,16 +338,6 @@
         <decimal value="0" />
       </disabledValue>
     </policy>
-    <policy name="ConfigureEnabledUtilityCursorWrap" class="Both" displayName="$(string.ConfigureEnabledUtilityCursorWrap)" explainText="$(string.ConfigureEnabledUtilityDescription)" key="Software\Policies\PowerToys" valueName="ConfigureEnabledUtilityCursorWrap">
-      <parentCategory ref="PowerToys" />
-      <supportedOn ref="SUPPORTED_POWERTOYS_0_97_0" />
-      <enabledValue>
-        <decimal value="1" />
-      </enabledValue>
-      <disabledValue>
-        <decimal value="0" />
-      </disabledValue>
-    </policy>
     <policy name="ConfigureEnabledUtilityFindMyMouse" class="Both" displayName="$(string.ConfigureEnabledUtilityFindMyMouse)" explainText="$(string.ConfigureEnabledUtilityDescription)" key="Software\Policies\PowerToys" valueName="ConfigureEnabledUtilityFindMyMouse">
       <parentCategory ref="PowerToys" />
       <supportedOn ref="SUPPORTED_POWERTOYS_0_64_0" />

src/gpo/assets/en-US/PowerToys.adml

@@ -1,7 +1,7 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!-- Copyright (c) Microsoft Corporation.
      Licensed under the MIT License. -->
-<policyDefinitionResources xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" revision="1.19" schemaVersion="1.0" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
+<policyDefinitionResources xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" revision="1.18" schemaVersion="1.0" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
   <displayName>PowerToys</displayName>
   <description>PowerToys</description>
   <resources>
@@ -34,7 +34,6 @@
       <string id="SUPPORTED_POWERTOYS_0_89_0">PowerToys version 0.89.0 or later</string>
       <string id="SUPPORTED_POWERTOYS_0_90_0">PowerToys version 0.90.0 or later</string>
       <string id="SUPPORTED_POWERTOYS_0_96_0">PowerToys version 0.96.0 or later</string>
-      <string id="SUPPORTED_POWERTOYS_0_97_0">PowerToys version 0.97.0 or later</string>
       <string id="SUPPORTED_POWERTOYS_0_64_0_TO_0_87_1">From PowerToys version 0.64.0 until PowerToys version 0.87.1</string>
 
       <string id="ConfigureAllUtilityGlobalEnabledStateDescription">This policy configures the enabled state for all PowerToys utilities.
@@ -267,7 +266,6 @@ If you don't configure this policy, the user will be able to control the setting
       <string id="ConfigureEnabledUtilityKeyboardManager">Keyboard Manager: Configure enabled state</string>
       <string id="ConfigureEnabledUtilityFindMyMouse">Find My Mouse: Configure enabled state</string>
       <string id="ConfigureEnabledUtilityMouseHighlighter">Mouse Highlighter: Configure enabled state</string>
-      <string id="ConfigureEnabledUtilityCursorWrap">CursorWrap: Configure enabled state</string>
       <string id="ConfigureEnabledUtilityMouseJump">Mouse Jump: Configure enabled state</string>
       <string id="ConfigureEnabledUtilityMousePointerCrosshairs">Mouse Pointer Crosshairs: Configure enabled state</string>
       <string id="ConfigureEnabledUtilityMouseWithoutBorders">Mouse Without Borders: Configure enabled state</string>

src/modules/LightSwitch/LightSwitchService/LightSwitchService.cpp

@@ -250,6 +250,7 @@ DWORD WINAPI ServiceWorkerThread(LPVOID lpParam)
 
     Logger::info(L"[LightSwitchService] Initialized at {:02d}:{:02d}.", st.wHour, st.wMinute);
     stateManager.SyncInitialThemeState();
+    stateManager.OnTick(nowMinutes);
 
     // ────────────────────────────────────────────────────────────────
     // Worker Loop
@@ -280,7 +281,7 @@ DWORD WINAPI ServiceWorkerThread(LPVOID lpParam)
             GetLocalTime(&st);
             nowMinutes = st.wHour * 60 + st.wMinute;
             DetectAndHandleExternalThemeChange(stateManager);
-            stateManager.OnTick();
+            stateManager.OnTick(nowMinutes);
             continue;
         }
 

src/modules/LightSwitch/LightSwitchService/LightSwitchStateManager.cpp

@@ -28,7 +28,7 @@ void LightSwitchStateManager::OnSettingsChanged()
 }
 
 // Called once per minute
-void LightSwitchStateManager::OnTick()
+void LightSwitchStateManager::OnTick(int currentMinutes)
 {
     std::lock_guard<std::mutex> lock(_stateMutex);
     if (_state.lastAppliedMode != ScheduleMode::FollowNightLight)
@@ -109,14 +109,10 @@ void LightSwitchStateManager::SyncInitialThemeState()
     std::lock_guard<std::mutex> lock(_stateMutex);
     _state.isSystemLightActive = GetCurrentSystemTheme();
     _state.isAppsLightActive = GetCurrentAppsTheme();
-    _state.isNightLightActive = IsNightLightEnabled();
     Logger::debug(L"[LightSwitchStateManager] Synced initial state to current system theme ({})",
                   _state.isSystemLightActive ? L"light" : L"dark");
     Logger::debug(L"[LightSwitchStateManager] Synced initial state to current apps theme ({})",
                   _state.isAppsLightActive ? L"light" : L"dark");
-    
-    // This will ensure that the theme is applied according to current settings at startup
-    EvaluateAndApplyIfNeeded();
 }
 
 static std::pair<int, int> update_sun_times(auto& settings)

src/modules/LightSwitch/LightSwitchService/LightSwitchStateManager.h

@@ -28,7 +28,7 @@ public:
     void OnSettingsChanged();
 
     // Called every minute (from service worker tick).
-    void OnTick();
+    void OnTick(int currentMinutes);
 
     // Called when manual override is toggled (via shortcut or system change).
     void OnManualOverride();

src/modules/MeasureTool/MeasureToolUI/MeasureToolXAML/MainWindow.xaml

@@ -10,6 +10,7 @@
     IsMaximizable="False"
     IsMinimizable="False"
     IsResizable="False"
+    IsShownInSwitchers="False"
     IsTitleBarVisible="False"
     mc:Ignorable="d">
     <winuiex:WindowEx.Backdrop>

src/modules/MeasureTool/MeasureToolUI/MeasureToolXAML/MainWindow.xaml.cs

@@ -52,23 +52,12 @@ namespace MeasureToolUI
             var presenter = _appWindow.Presenter as OverlappedPresenter;
             presenter.IsAlwaysOnTop = true;
             this.SetIsAlwaysOnTop(true);
+            this.SetIsShownInSwitchers(false);
             this.SetIsResizable(false);
             this.SetIsMinimizable(false);
             this.SetIsMaximizable(false);
             IsTitleBarVisible = false;
 
-            try
-            {
-                this.SetIsShownInSwitchers(false);
-            }
-            catch (NotImplementedException)
-            {
-                // WinUI will throw if explorer is not running, safely ignore
-            }
-            catch (Exception)
-            {
-            }
-
             // Remove the caption style from the window style. Windows App SDK 1.6 added it, which made the title bar and borders appear for Measure Tool. This code removes it.
             var windowStyle = GetWindowLong(hwnd, GWL_STYLE);
             windowStyle = windowStyle & (~WS_CAPTION);

src/modules/MouseUtils/CursorWrap/CursorWrap.vcxproj

@@ -84,17 +84,14 @@
     </ClCompile>
   </ItemDefinitionGroup>
   <ItemGroup>
-    <ClInclude Include="CursorWrapCore.h" />
     <ClInclude Include="CursorWrapTests.h" />
-    <ClInclude Include="MonitorTopology.h" />
     <ClInclude Include="pch.h" />
     <ClInclude Include="trace.h" />
     <ClInclude Include="resource.h" />
   </ItemGroup>
   <ItemGroup>
-    <ClCompile Include="CursorWrapCore.cpp" />
     <ClCompile Include="dllmain.cpp" />
-    <ClCompile Include="MonitorTopology.cpp" />
+
     <ClCompile Include="pch.cpp">
       <PrecompiledHeader Condition="'$(UsePrecompiledHeaders)' != 'false'">Create</PrecompiledHeader>
     </ClCompile>

src/modules/MouseUtils/CursorWrap/CursorWrapCore.cpp

@@ -1,282 +0,0 @@
-// Copyright (c) Microsoft Corporation
-// The Microsoft Corporation licenses this file to you under the MIT license.
-// See the LICENSE file in the project root for more information.
-
-#include "pch.h"
-#include "CursorWrapCore.h"
-#include "../../../common/logger/logger.h"
-#include <sstream>
-#include <iomanip>
-#include <ctime>
-
-CursorWrapCore::CursorWrapCore()
-{
-}
-
-#ifdef _DEBUG
-std::wstring CursorWrapCore::GenerateTopologyJSON() const
-{
-    std::wostringstream json;
-
-    // Get current time
-    auto now = std::time(nullptr);
-    std::tm tm{};
-    localtime_s(&tm, &now);
-
-    wchar_t computerName[MAX_COMPUTERNAME_LENGTH + 1] = {0};
-    DWORD size = MAX_COMPUTERNAME_LENGTH + 1;
-    GetComputerNameW(computerName, &size);
-
-    wchar_t userName[256] = {0};
-    size = 256;
-    GetUserNameW(userName, &size);
-
-    json << L"{\n";
-    json << L"  \"captured_at\": \"" << std::put_time(&tm, L"%Y-%m-%dT%H:%M:%S%z") << L"\",\n";
-    json << L"  \"computer_name\": \"" << computerName << L"\",\n";
-    json << L"  \"user_name\": \"" << userName << L"\",\n";
-    json << L"  \"monitor_count\": " << m_monitors.size() << L",\n";
-    json << L"  \"monitors\": [\n";
-
-    for (size_t i = 0; i < m_monitors.size(); ++i)
-    {
-        const auto& monitor = m_monitors[i];
-
-        // Get DPI for this monitor
-        UINT dpiX = 96, dpiY = 96;
-        POINT center = {
-            (monitor.rect.left + monitor.rect.right) / 2,
-            (monitor.rect.top + monitor.rect.bottom) / 2
-        };
-        HMONITOR hMon = MonitorFromPoint(center, MONITOR_DEFAULTTONEAREST);
-        if (hMon)
-        {
-            // Try GetDpiForMonitor (requires linking Shcore.lib)
-            using GetDpiForMonitorFunc = HRESULT (WINAPI *)(HMONITOR, int, UINT*, UINT*);
-            HMODULE shcore = LoadLibraryW(L"Shcore.dll");
-            if (shcore)
-            {
-                auto getDpi = reinterpret_cast<GetDpiForMonitorFunc>(GetProcAddress(shcore, "GetDpiForMonitor"));
-                if (getDpi)
-                {
-                    getDpi(hMon, 0, &dpiX, &dpiY); // MDT_EFFECTIVE_DPI = 0
-                }
-                FreeLibrary(shcore);
-            }
-        }
-
-        int scalingPercent = static_cast<int>((dpiX / 96.0) * 100);
-
-        json << L"    {\n";
-        json << L"      \"left\": " << monitor.rect.left << L",\n";
-        json << L"      \"top\": " << monitor.rect.top << L",\n";
-        json << L"      \"right\": " << monitor.rect.right << L",\n";
-        json << L"      \"bottom\": " << monitor.rect.bottom << L",\n";
-        json << L"      \"width\": " << (monitor.rect.right - monitor.rect.left) << L",\n";
-        json << L"      \"height\": " << (monitor.rect.bottom - monitor.rect.top) << L",\n";
-        json << L"      \"dpi\": " << dpiX << L",\n";
-        json << L"      \"scaling_percent\": " << scalingPercent << L",\n";
-        json << L"      \"primary\": " << (monitor.isPrimary ? L"true" : L"false") << L",\n";
-        json << L"      \"monitor_id\": " << monitor.monitorId << L"\n";
-        json << L"    }";
-        if (i < m_monitors.size() - 1)
-        {
-            json << L",";
-        }
-        json << L"\n";
-    }
-
-    json << L"  ]\n";
-    json << L"}";
-
-    return json.str();
-}
-#endif
-
-void CursorWrapCore::UpdateMonitorInfo()
-{
-    size_t previousMonitorCount = m_monitors.size();
-    Logger::info(L"======= UPDATE MONITOR INFO START =======");
-    Logger::info(L"Previous monitor count: {}", previousMonitorCount);
-
-    m_monitors.clear();
-
-    EnumDisplayMonitors(nullptr, nullptr, [](HMONITOR hMonitor, HDC, LPRECT, LPARAM lParam) -> BOOL {
-        auto* self = reinterpret_cast<CursorWrapCore*>(lParam);
-
-        MONITORINFO mi{};
-        mi.cbSize = sizeof(MONITORINFO);
-        if (GetMonitorInfo(hMonitor, &mi))
-        {
-            MonitorInfo info{};
-            info.hMonitor = hMonitor; // Store handle for direct comparison later
-            info.rect = mi.rcMonitor;
-            info.isPrimary = (mi.dwFlags & MONITORINFOF_PRIMARY) != 0;
-            info.monitorId = static_cast<int>(self->m_monitors.size());
-            self->m_monitors.push_back(info);
-            
-            Logger::info(L"Enumerated monitor {}: hMonitor={}, rect=({},{},{},{}), primary={}",
-                info.monitorId, reinterpret_cast<uintptr_t>(hMonitor),
-                mi.rcMonitor.left, mi.rcMonitor.top, mi.rcMonitor.right, mi.rcMonitor.bottom,
-                info.isPrimary ? L"yes" : L"no");
-        }
-
-        return TRUE;
-    }, reinterpret_cast<LPARAM>(this));
-
-    if (previousMonitorCount != m_monitors.size())
-    {
-        Logger::info(L"*** MONITOR CONFIGURATION CHANGED: {} -> {} monitors ***", 
-            previousMonitorCount, m_monitors.size());
-    }
-
-    m_topology.Initialize(m_monitors);
-
-    // Log monitor configuration summary
-    Logger::info(L"Monitor configuration updated: {} monitor(s)", m_monitors.size());
-    for (size_t i = 0; i < m_monitors.size(); ++i)
-    {
-        const auto& m = m_monitors[i];
-        int width = m.rect.right - m.rect.left;
-        int height = m.rect.bottom - m.rect.top;
-        Logger::info(L"  Monitor {}: {}x{} at ({}, {}){}",
-            i, width, height, m.rect.left, m.rect.top,
-            m.isPrimary ? L" [PRIMARY]" : L"");
-    }
-    Logger::info(L"  Detected {} outer edges for cursor wrapping", m_topology.GetOuterEdges().size());
-
-    // Detect and log monitor gaps
-    auto gaps = m_topology.DetectMonitorGaps();
-    if (!gaps.empty())
-    {
-        Logger::warn(L"Monitor configuration has coordinate gaps that may prevent wrapping:");
-        for (const auto& gap : gaps)
-        {
-            Logger::warn(L"  Gap between Monitor {} and Monitor {}: {}px horizontal gap, {}px vertical overlap",
-                gap.monitor1Index, gap.monitor2Index, gap.horizontalGap, gap.verticalOverlap);
-        }
-        Logger::warn(L"  If monitors appear snapped in Display Settings but show gaps here:");
-        Logger::warn(L"  1. Try dragging monitors apart and snapping them back together");
-        Logger::warn(L"  2. Update your GPU drivers");
-    }
-
-    Logger::info(L"======= UPDATE MONITOR INFO END =======");
-}
-
-POINT CursorWrapCore::HandleMouseMove(const POINT& currentPos, bool disableWrapDuringDrag, int wrapMode, bool disableOnSingleMonitor)
-{
-    // Check if wrapping should be disabled on single monitor
-    if (disableOnSingleMonitor && m_monitors.size() <= 1)
-    {
-#ifdef _DEBUG
-        static bool loggedOnce = false;
-        if (!loggedOnce)
-        {
-            OutputDebugStringW(L"[CursorWrap] Single monitor detected - cursor wrapping disabled\n");
-            loggedOnce = true;
-        }
-#endif
-        return currentPos;
-    }
-
-    // Check if wrapping should be disabled during drag
-    if (disableWrapDuringDrag && (GetAsyncKeyState(VK_LBUTTON) & 0x8000))
-    {
-#ifdef _DEBUG
-        OutputDebugStringW(L"[CursorWrap] [DRAG] Left mouse button down - skipping wrap\n");
-#endif
-        return currentPos;
-    }
-
-    // Convert int wrapMode to WrapMode enum
-    WrapMode mode = static_cast<WrapMode>(wrapMode);
-
-#ifdef _DEBUG
-    {
-        std::wostringstream oss;
-        oss << L"[CursorWrap] [MOVE] Cursor at (" << currentPos.x << L", " << currentPos.y << L")";
-
-        // Get current monitor and identify which one
-        HMONITOR currentMonitor = MonitorFromPoint(currentPos, MONITOR_DEFAULTTONEAREST);
-        RECT monitorRect;
-        if (m_topology.GetMonitorRect(currentMonitor, monitorRect))
-        {
-            // Find monitor ID
-            int monitorId = -1;
-            for (const auto& monitor : m_monitors)
-            {
-                if (monitor.rect.left == monitorRect.left &&
-                    monitor.rect.top == monitorRect.top &&
-                    monitor.rect.right == monitorRect.right &&
-                    monitor.rect.bottom == monitorRect.bottom)
-                {
-                    monitorId = monitor.monitorId;
-                    break;
-                }
-            }
-            oss << L" on Monitor " << monitorId << L" [" << monitorRect.left << L".." << monitorRect.right
-                << L", " << monitorRect.top << L".." << monitorRect.bottom << L"]";
-        }
-        else
-        {
-            oss << L" (beyond monitor bounds)";
-        }
-        oss << L"\n";
-        OutputDebugStringW(oss.str().c_str());
-    }
-#endif
-
-    // Get current monitor
-    HMONITOR currentMonitor = MonitorFromPoint(currentPos, MONITOR_DEFAULTTONEAREST);
-
-    // Check if cursor is on an outer edge (filtered by wrap mode)
-    EdgeType edgeType;
-    if (!m_topology.IsOnOuterEdge(currentMonitor, currentPos, edgeType, mode))
-    {
-#ifdef _DEBUG
-        static bool lastWasNotOuter = false;
-        if (!lastWasNotOuter)
-        {
-            OutputDebugStringW(L"[CursorWrap] [MOVE] Not on outer edge - no wrapping\n");
-            lastWasNotOuter = true;
-        }
-#endif
-        return currentPos; // Not on an outer edge
-    }
-
-#ifdef _DEBUG
-    {
-        const wchar_t* edgeStr = L"Unknown";
-        switch (edgeType)
-        {
-        case EdgeType::Left: edgeStr = L"Left"; break;
-        case EdgeType::Right: edgeStr = L"Right"; break;
-        case EdgeType::Top: edgeStr = L"Top"; break;
-        case EdgeType::Bottom: edgeStr = L"Bottom"; break;
-        }
-        std::wostringstream oss;
-        oss << L"[CursorWrap] [EDGE] Detected outer " << edgeStr << L" edge at (" << currentPos.x << L", " << currentPos.y << L")\n";
-        OutputDebugStringW(oss.str().c_str());
-    }
-#endif
-
-    // Calculate wrap destination
-    POINT newPos = m_topology.GetWrapDestination(currentMonitor, currentPos, edgeType);
-
-#ifdef _DEBUG
-    if (newPos.x != currentPos.x || newPos.y != currentPos.y)
-    {
-        std::wostringstream oss;
-        oss << L"[CursorWrap] [WRAP] Position change: (" << currentPos.x << L", " << currentPos.y
-            << L") -> (" << newPos.x << L", " << newPos.y << L")\n";
-        oss << L"[CursorWrap] [WRAP] Delta: (" << (newPos.x - currentPos.x) << L", " << (newPos.y - currentPos.y) << L")\n";
-        OutputDebugStringW(oss.str().c_str());
-    }
-    else
-    {
-        OutputDebugStringW(L"[CursorWrap] [WRAP] No position change (same-monitor wrap?)\n");
-    }
-#endif
-
-    return newPos;
-}

src/modules/MouseUtils/CursorWrap/CursorWrapCore.h

@@ -1,35 +0,0 @@
-// Copyright (c) Microsoft Corporation
-// The Microsoft Corporation licenses this file to you under the MIT license.
-// See the LICENSE file in the project root for more information.
-
-#pragma once
-#include <windows.h>
-#include <vector>
-#include <string>
-#include "MonitorTopology.h"
-
-// Core cursor wrapping engine
-class CursorWrapCore
-{
-public:
-    CursorWrapCore();
-
-    void UpdateMonitorInfo();
-    
-    // Handle mouse move with wrap mode filtering
-    // wrapMode: 0=Both, 1=VerticalOnly, 2=HorizontalOnly
-    // disableOnSingleMonitor: if true, cursor wrapping is disabled when only one monitor is connected
-    POINT HandleMouseMove(const POINT& currentPos, bool disableWrapDuringDrag, int wrapMode, bool disableOnSingleMonitor);
-
-    const std::vector<MonitorInfo>& GetMonitors() const { return m_monitors; }
-    size_t GetMonitorCount() const { return m_monitors.size(); }
-    const MonitorTopology& GetTopology() const { return m_topology; }
-
-private:
-#ifdef _DEBUG
-    std::wstring GenerateTopologyJSON() const;
-#endif
-
-    std::vector<MonitorInfo> m_monitors;
-    MonitorTopology m_topology;
-};

src/modules/MouseUtils/CursorWrap/MonitorTopology.cpp

@@ -1,546 +0,0 @@
-// Copyright (c) Microsoft Corporation
-// The Microsoft Corporation licenses this file to you under the MIT license.
-// See the LICENSE file in the project root for more information.
-
-#include "pch.h"
-#include "MonitorTopology.h"
-#include "../../../common/logger/logger.h"
-#include <algorithm>
-#include <cmath>
-
-void MonitorTopology::Initialize(const std::vector<MonitorInfo>& monitors)
-{
-    Logger::info(L"======= TOPOLOGY INITIALIZATION START =======");
-    Logger::info(L"Initializing edge-based topology for {} monitors", monitors.size());
-
-    m_monitors = monitors;
-    m_outerEdges.clear();
-    m_edgeMap.clear();
-
-    if (monitors.empty())
-    {
-        Logger::warn(L"No monitors provided to Initialize");
-        return;
-    }
-
-    // Log monitor details
-    for (size_t i = 0; i < monitors.size(); ++i)
-    {
-        const auto& m = monitors[i];
-        Logger::info(L"Monitor {}: hMonitor={}, rect=({},{},{},{}), primary={}",
-            i, reinterpret_cast<uintptr_t>(m.hMonitor),
-            m.rect.left, m.rect.top, m.rect.right, m.rect.bottom,
-            m.isPrimary ? L"yes" : L"no");
-    }
-
-    BuildEdgeMap();
-    IdentifyOuterEdges();
-
-    Logger::info(L"Found {} outer edges", m_outerEdges.size());
-    for (const auto& edge : m_outerEdges)
-    {
-        const wchar_t* typeStr = L"Unknown";
-        switch (edge.type)
-        {
-        case EdgeType::Left: typeStr = L"Left"; break;
-        case EdgeType::Right: typeStr = L"Right"; break;
-        case EdgeType::Top: typeStr = L"Top"; break;
-        case EdgeType::Bottom: typeStr = L"Bottom"; break;
-        }
-        Logger::info(L"Outer edge: Monitor {} {} at position {}, range [{}, {}]",
-            edge.monitorIndex, typeStr, edge.position, edge.start, edge.end);
-    }
-    Logger::info(L"======= TOPOLOGY INITIALIZATION COMPLETE =======");
-}
-
-void MonitorTopology::BuildEdgeMap()
-{
-    // Create edges for each monitor using monitor index (not HMONITOR)
-    // This is important because HMONITOR handles can change when monitors are
-    // added/removed dynamically, but indices remain stable within a single
-    // topology configuration
-    for (size_t idx = 0; idx < m_monitors.size(); ++idx)
-    {
-        const auto& monitor = m_monitors[idx];
-        int monitorIndex = static_cast<int>(idx);
-
-        // Left edge
-        MonitorEdge leftEdge;
-        leftEdge.monitorIndex = monitorIndex;
-        leftEdge.type = EdgeType::Left;
-        leftEdge.position = monitor.rect.left;
-        leftEdge.start = monitor.rect.top;
-        leftEdge.end = monitor.rect.bottom;
-        leftEdge.isOuter = true; // Will be updated in IdentifyOuterEdges
-        m_edgeMap[{monitorIndex, EdgeType::Left}] = leftEdge;
-      
-        // Right edge
-        MonitorEdge rightEdge;
-        rightEdge.monitorIndex = monitorIndex;
-        rightEdge.type = EdgeType::Right;
-        rightEdge.position = monitor.rect.right - 1;
-        rightEdge.start = monitor.rect.top;
-        rightEdge.end = monitor.rect.bottom;
-        rightEdge.isOuter = true;
-        m_edgeMap[{monitorIndex, EdgeType::Right}] = rightEdge;
-
-        // Top edge
-        MonitorEdge topEdge;
-        topEdge.monitorIndex = monitorIndex;
-        topEdge.type = EdgeType::Top;
-        topEdge.position = monitor.rect.top;
-        topEdge.start = monitor.rect.left;
-        topEdge.end = monitor.rect.right;
-        topEdge.isOuter = true;
-        m_edgeMap[{monitorIndex, EdgeType::Top}] = topEdge;
-
-        // Bottom edge
-        MonitorEdge bottomEdge;
-        bottomEdge.monitorIndex = monitorIndex;
-        bottomEdge.type = EdgeType::Bottom;
-        bottomEdge.position = monitor.rect.bottom - 1;
-        bottomEdge.start = monitor.rect.left;
-        bottomEdge.end = monitor.rect.right;
-        bottomEdge.isOuter = true;
-        m_edgeMap[{monitorIndex, EdgeType::Bottom}] = bottomEdge;
-    }
-}
-
-void MonitorTopology::IdentifyOuterEdges()
-{
-    const int tolerance = 50;
-    
-    // Check each edge against all other edges to find adjacent ones
-    for (auto& [key1, edge1] : m_edgeMap)
-    {
-        for (const auto& [key2, edge2] : m_edgeMap)
-        {
-            if (edge1.monitorIndex == edge2.monitorIndex)
-            {
-                continue; // Same monitor
-            }
-
-            // Check if edges are adjacent
-            if (EdgesAreAdjacent(edge1, edge2, tolerance))
-            {
-                edge1.isOuter = false;
-                break; // This edge has an adjacent monitor
-            }
-        }
-
-        if (edge1.isOuter)
-        {
-            m_outerEdges.push_back(edge1);
-        }
-    }
-}
-
-bool MonitorTopology::EdgesAreAdjacent(const MonitorEdge& edge1, const MonitorEdge& edge2, int tolerance) const
-{
-    // Edges must be opposite types to be adjacent
-    bool oppositeTypes = false;
-
-    if ((edge1.type == EdgeType::Left && edge2.type == EdgeType::Right) ||
-        (edge1.type == EdgeType::Right && edge2.type == EdgeType::Left) ||
-        (edge1.type == EdgeType::Top && edge2.type == EdgeType::Bottom) ||
-        (edge1.type == EdgeType::Bottom && edge2.type == EdgeType::Top))
-    {
-        oppositeTypes = true;
-    }
-
-    if (!oppositeTypes)
-    {
-        return false;
-    }
-
-    // Check if positions are within tolerance
-    if (abs(edge1.position - edge2.position) > tolerance)
-    {
-        return false;
-    }
-
-    // Check if perpendicular ranges overlap
-    int overlapStart = max(edge1.start, edge2.start);
-    int overlapEnd = min(edge1.end, edge2.end);
-
-    return overlapEnd > overlapStart + tolerance;
-}
-
-bool MonitorTopology::IsOnOuterEdge(HMONITOR monitor, const POINT& cursorPos, EdgeType& outEdgeType, WrapMode wrapMode) const
-{
-    RECT monitorRect;
-    if (!GetMonitorRect(monitor, monitorRect))
-    {
-        Logger::warn(L"IsOnOuterEdge: GetMonitorRect failed for monitor handle {}", reinterpret_cast<uintptr_t>(monitor));
-        return false;
-    }
-
-    // Get monitor index for edge map lookup
-    int monitorIndex = GetMonitorIndex(monitor);
-    if (monitorIndex < 0)
-    {
-        Logger::warn(L"IsOnOuterEdge: Monitor index not found for handle {} at cursor ({}, {})", 
-            reinterpret_cast<uintptr_t>(monitor), cursorPos.x, cursorPos.y);
-        return false; // Monitor not found in our list
-    }
-
-    // Check each edge type
-    const int edgeThreshold = 1;
-
-    // At corners, multiple edges may match - collect all candidates and try each
-    // to find one with a valid wrap destination
-    std::vector<EdgeType> candidateEdges;
-
-    // Left edge - only if mode allows horizontal wrapping
-    if ((wrapMode == WrapMode::Both || wrapMode == WrapMode::HorizontalOnly) &&
-        cursorPos.x <= monitorRect.left + edgeThreshold)
-    {
-        auto it = m_edgeMap.find({monitorIndex, EdgeType::Left});
-        if (it != m_edgeMap.end() && it->second.isOuter)
-        {
-            candidateEdges.push_back(EdgeType::Left);
-        }
-    }
-
-    // Right edge - only if mode allows horizontal wrapping
-    if ((wrapMode == WrapMode::Both || wrapMode == WrapMode::HorizontalOnly) &&
-        cursorPos.x >= monitorRect.right - 1 - edgeThreshold)
-    {
-        auto it = m_edgeMap.find({monitorIndex, EdgeType::Right});
-        if (it != m_edgeMap.end())
-        {
-            if (it->second.isOuter)
-            {
-                candidateEdges.push_back(EdgeType::Right);
-            }
-            // Debug: Log why right edge isn't outer
-            else
-            {
-                Logger::trace(L"IsOnOuterEdge: Monitor {} right edge is NOT outer (inner edge)", monitorIndex);
-            }
-        }
-    }
-
-    // Top edge - only if mode allows vertical wrapping
-    if ((wrapMode == WrapMode::Both || wrapMode == WrapMode::VerticalOnly) &&
-        cursorPos.y <= monitorRect.top + edgeThreshold)
-    {
-        auto it = m_edgeMap.find({monitorIndex, EdgeType::Top});
-        if (it != m_edgeMap.end() && it->second.isOuter)
-        {
-            candidateEdges.push_back(EdgeType::Top);
-        }
-    }
-
-    // Bottom edge - only if mode allows vertical wrapping
-    if ((wrapMode == WrapMode::Both || wrapMode == WrapMode::VerticalOnly) &&
-        cursorPos.y >= monitorRect.bottom - 1 - edgeThreshold)
-    {
-        auto it = m_edgeMap.find({monitorIndex, EdgeType::Bottom});
-        if (it != m_edgeMap.end() && it->second.isOuter)
-        {
-            candidateEdges.push_back(EdgeType::Bottom);
-        }
-    }
-
-    if (candidateEdges.empty())
-    {
-        return false;
-    }
-
-    // Try each candidate edge and return first with valid wrap destination
-    for (EdgeType candidate : candidateEdges)
-    {
-        MonitorEdge oppositeEdge = FindOppositeOuterEdge(candidate,
-            (candidate == EdgeType::Left || candidate == EdgeType::Right) ? cursorPos.y : cursorPos.x);
-
-        if (oppositeEdge.monitorIndex >= 0)
-        {
-            outEdgeType = candidate;
-            return true;
-        }
-    }
-
-    return false;
-}
-
-POINT MonitorTopology::GetWrapDestination(HMONITOR fromMonitor, const POINT& cursorPos, EdgeType edgeType) const
-{
-    // Get monitor index for edge map lookup
-    int monitorIndex = GetMonitorIndex(fromMonitor);
-    if (monitorIndex < 0)
-    {
-        return cursorPos; // Monitor not found
-    }
-
-    auto it = m_edgeMap.find({monitorIndex, edgeType});
-    if (it == m_edgeMap.end())
-    {
-        return cursorPos; // Edge not found
-    }
-
-    const MonitorEdge& fromEdge = it->second;
-
-    // Calculate relative position on current edge (0.0 to 1.0)
-    double relativePos = GetRelativePosition(fromEdge,
-        (edgeType == EdgeType::Left || edgeType == EdgeType::Right) ? cursorPos.y : cursorPos.x);
-
-    // Find opposite outer edge
-    MonitorEdge oppositeEdge = FindOppositeOuterEdge(edgeType,
-        (edgeType == EdgeType::Left || edgeType == EdgeType::Right) ? cursorPos.y : cursorPos.x);
-
-    if (oppositeEdge.monitorIndex < 0)
-    {
-        // No opposite edge found, wrap within same monitor
-        RECT monitorRect;
-        if (GetMonitorRect(fromMonitor, monitorRect))
-        {
-            POINT result = cursorPos;
-            switch (edgeType)
-            {
-            case EdgeType::Left:
-                result.x = monitorRect.right - 2;
-                break;
-            case EdgeType::Right:
-                result.x = monitorRect.left + 1;
-                break;
-            case EdgeType::Top:
-                result.y = monitorRect.bottom - 2;
-                break;
-            case EdgeType::Bottom:
-                result.y = monitorRect.top + 1;
-                break;
-            }
-            return result;
-        }
-        return cursorPos;
-    }
-
-    // Calculate target position on opposite edge
-    POINT result;
-
-    if (edgeType == EdgeType::Left || edgeType == EdgeType::Right)
-    {
-        // Horizontal edge -> vertical movement
-        result.x = oppositeEdge.position;
-        result.y = GetAbsolutePosition(oppositeEdge, relativePos);
-    }
-    else
-    {
-        // Vertical edge -> horizontal movement
-        result.y = oppositeEdge.position;
-        result.x = GetAbsolutePosition(oppositeEdge, relativePos);
-    }
-
-    return result;
-}
-
-MonitorEdge MonitorTopology::FindOppositeOuterEdge(EdgeType fromEdge, int relativePosition) const
-{
-    EdgeType targetType;
-    bool findMax; // true = find max position, false = find min position
-
-    switch (fromEdge)
-    {
-    case EdgeType::Left:
-        targetType = EdgeType::Right;
-        findMax = true;
-        break;
-    case EdgeType::Right:
-        targetType = EdgeType::Left;
-        findMax = false;
-        break;
-    case EdgeType::Top:
-        targetType = EdgeType::Bottom;
-        findMax = true;
-        break;
-    case EdgeType::Bottom:
-        targetType = EdgeType::Top;
-        findMax = false;
-        break;
-    default:
-        return { .monitorIndex = -1 }; // Invalid edge type
-    }
-
-    MonitorEdge result = { .monitorIndex = -1 }; // -1 indicates not found
-    int extremePosition = findMax ? INT_MIN : INT_MAX;
-
-    for (const auto& edge : m_outerEdges)
-    {
-        if (edge.type != targetType)
-        {
-            continue;
-        }
-
-        // Check if this edge overlaps with the relative position
-        if (relativePosition >= edge.start && relativePosition <= edge.end)
-        {
-            if ((findMax && edge.position > extremePosition) ||
-                (!findMax && edge.position < extremePosition))
-            {
-                extremePosition = edge.position;
-                result = edge;
-            }
-        }
-    }
-
-    return result;
-}
-
-double MonitorTopology::GetRelativePosition(const MonitorEdge& edge, int coordinate) const
-{
-    if (edge.end == edge.start)
-    {
-        return 0.5; // Avoid division by zero
-    }
-
-    int clamped = max(edge.start, min(coordinate, edge.end));
-    // Use int64_t to avoid overflow warning C26451
-    int64_t numerator = static_cast<int64_t>(clamped) - static_cast<int64_t>(edge.start);
-    int64_t denominator = static_cast<int64_t>(edge.end) - static_cast<int64_t>(edge.start);
-    return static_cast<double>(numerator) / static_cast<double>(denominator);
-}
-
-int MonitorTopology::GetAbsolutePosition(const MonitorEdge& edge, double relativePosition) const
-{
-    // Use int64_t to prevent arithmetic overflow during subtraction and multiplication
-    int64_t range = static_cast<int64_t>(edge.end) - static_cast<int64_t>(edge.start);
-    int64_t offset = static_cast<int64_t>(relativePosition * static_cast<double>(range));
-    // Clamp result to int range before returning
-    int64_t result = static_cast<int64_t>(edge.start) + offset;
-    return static_cast<int>(result);
-}
-
-std::vector<MonitorTopology::GapInfo> MonitorTopology::DetectMonitorGaps() const
-{
-    std::vector<GapInfo> gaps;
-    const int gapThreshold = 50; // Same as ADJACENCY_TOLERANCE
-
-    // Check each pair of monitors
-    for (size_t i = 0; i < m_monitors.size(); ++i)
-    {
-        for (size_t j = i + 1; j < m_monitors.size(); ++j)
-        {
-            const auto& m1 = m_monitors[i];
-            const auto& m2 = m_monitors[j];
-
-            // Check vertical overlap
-            int vOverlapStart = max(m1.rect.top, m2.rect.top);
-            int vOverlapEnd = min(m1.rect.bottom, m2.rect.bottom);
-            int vOverlap = vOverlapEnd - vOverlapStart;
-
-            if (vOverlap <= 0)
-            {
-                continue; // No vertical overlap, skip
-            }
-
-            // Check horizontal gap
-            int hGap = min(abs(m1.rect.right - m2.rect.left), abs(m2.rect.right - m1.rect.left));
-
-            if (hGap > gapThreshold)
-            {
-                GapInfo gap;
-                gap.monitor1Index = static_cast<int>(i);
-                gap.monitor2Index = static_cast<int>(j);
-                gap.horizontalGap = hGap;
-                gap.verticalOverlap = vOverlap;
-                gaps.push_back(gap);
-            }
-        }
-    }
-
-    return gaps;
-}
-
-HMONITOR MonitorTopology::GetMonitorFromPoint(const POINT& pt) const
-{
-    return MonitorFromPoint(pt, MONITOR_DEFAULTTONEAREST);
-}
-
-bool MonitorTopology::GetMonitorRect(HMONITOR monitor, RECT& rect) const
-{
-    // First try direct HMONITOR comparison
-    for (const auto& monitorInfo : m_monitors)
-    {
-        if (monitorInfo.hMonitor == monitor)
-        {
-            rect = monitorInfo.rect;
-            return true;
-        }
-    }
-
-    // Fallback: If direct comparison fails, try matching by current monitor info
-    MONITORINFO mi{};
-    mi.cbSize = sizeof(MONITORINFO);
-    if (GetMonitorInfo(monitor, &mi))
-    {
-        for (const auto& monitorInfo : m_monitors)
-        {
-            if (monitorInfo.rect.left == mi.rcMonitor.left &&
-                monitorInfo.rect.top == mi.rcMonitor.top &&
-                monitorInfo.rect.right == mi.rcMonitor.right &&
-                monitorInfo.rect.bottom == mi.rcMonitor.bottom)
-            {
-                rect = monitorInfo.rect;
-                return true;
-            }
-        }
-    }
-    
-    return false;
-}
-
-HMONITOR MonitorTopology::GetMonitorFromRect(const RECT& rect) const
-{
-    return MonitorFromRect(&rect, MONITOR_DEFAULTTONEAREST);
-}
-
-int MonitorTopology::GetMonitorIndex(HMONITOR monitor) const
-{
-    // First try direct HMONITOR comparison (fast and accurate)
-    for (size_t i = 0; i < m_monitors.size(); ++i)
-    {
-        if (m_monitors[i].hMonitor == monitor)
-        {
-            return static_cast<int>(i);
-        }
-    }
-
-    // Fallback: If direct comparison fails (e.g., handle changed after display reconfiguration),
-    // try matching by position. Get the monitor's current rect and find matching stored rect.
-    MONITORINFO mi{};
-    mi.cbSize = sizeof(MONITORINFO);
-    if (GetMonitorInfo(monitor, &mi))
-    {
-        for (size_t i = 0; i < m_monitors.size(); ++i)
-        {
-            // Match by rect bounds
-            if (m_monitors[i].rect.left == mi.rcMonitor.left &&
-                m_monitors[i].rect.top == mi.rcMonitor.top &&
-                m_monitors[i].rect.right == mi.rcMonitor.right &&
-                m_monitors[i].rect.bottom == mi.rcMonitor.bottom)
-            {
-                Logger::trace(L"GetMonitorIndex: Found monitor {} via rect fallback (handle changed from {} to {})", 
-                    i, reinterpret_cast<uintptr_t>(m_monitors[i].hMonitor), reinterpret_cast<uintptr_t>(monitor));
-                return static_cast<int>(i);
-            }
-        }
-        
-        // Log all stored monitors vs the requested one for debugging
-        Logger::warn(L"GetMonitorIndex: No match found. Requested monitor rect=({},{},{},{})",
-            mi.rcMonitor.left, mi.rcMonitor.top, mi.rcMonitor.right, mi.rcMonitor.bottom);
-        for (size_t i = 0; i < m_monitors.size(); ++i)
-        {
-            Logger::warn(L"  Stored monitor {}: rect=({},{},{},{})",
-                i, m_monitors[i].rect.left, m_monitors[i].rect.top, 
-                m_monitors[i].rect.right, m_monitors[i].rect.bottom);
-        }
-    }
-    else
-    {
-        Logger::warn(L"GetMonitorIndex: GetMonitorInfo failed for handle {}", reinterpret_cast<uintptr_t>(monitor));
-    }
-
-    return -1; // Not found
-}
-

src/modules/MouseUtils/CursorWrap/MonitorTopology.h

@@ -1,106 +0,0 @@
-// Copyright (c) Microsoft Corporation
-// The Microsoft Corporation licenses this file to you under the MIT license.
-// See the LICENSE file in the project root for more information.
-
-#pragma once
-#include <windows.h>
-#include <vector>
-#include <map>
-
-// Monitor information structure
-struct MonitorInfo
-{
-    HMONITOR hMonitor; // Direct handle for accurate lookup after display changes
-    RECT rect;
-    bool isPrimary;
-    int monitorId;
-};
-
-// Edge type enumeration
-enum class EdgeType
-{
-    Left = 0,
-    Right = 1,
-    Top = 2,
-    Bottom = 3
-};
-
-// Wrap mode enumeration (matches Settings UI dropdown)
-enum class WrapMode
-{
-    Both = 0,           // Wrap in both directions
-    VerticalOnly = 1,   // Only wrap top/bottom
-    HorizontalOnly = 2  // Only wrap left/right
-};
-
-// Represents a single edge of a monitor
-struct MonitorEdge
-{
-    int monitorIndex;  // Index into m_monitors (stable across display changes)
-    EdgeType type;
-    int start;      // For vertical edges: Y start; horizontal: X start
-    int end;        // For vertical edges: Y end; horizontal: X end
-    int position;   // For vertical edges: X coord; horizontal: Y coord
-    bool isOuter;   // True if no adjacent monitor touches this edge
-};
-
-// Monitor topology helper - manages edge-based monitor layout
-struct MonitorTopology
-{
-    void Initialize(const std::vector<MonitorInfo>& monitors);
-
-    // Check if cursor is on an outer edge of the given monitor
-    // wrapMode filters which edges are considered (Both, VerticalOnly, HorizontalOnly)
-    bool IsOnOuterEdge(HMONITOR monitor, const POINT& cursorPos, EdgeType& outEdgeType, WrapMode wrapMode) const;
-
-    // Get the wrap destination point for a cursor on an outer edge
-    POINT GetWrapDestination(HMONITOR fromMonitor, const POINT& cursorPos, EdgeType edgeType) const;
-
-    // Get monitor at point (helper)
-    HMONITOR GetMonitorFromPoint(const POINT& pt) const;
-
-    // Get monitor rectangle (helper)
-    bool GetMonitorRect(HMONITOR monitor, RECT& rect) const;
-
-    // Get outer edges collection (for debugging)
-    const std::vector<MonitorEdge>& GetOuterEdges() const { return m_outerEdges; }
-
-    // Detect gaps between monitors that should be snapped together
-    struct GapInfo {
-        int monitor1Index;
-        int monitor2Index;
-        int horizontalGap;
-        int verticalOverlap;
-    };
-    std::vector<GapInfo> DetectMonitorGaps() const;
-
-private:
-    std::vector<MonitorInfo> m_monitors;
-    std::vector<MonitorEdge> m_outerEdges;
-
-    // Map from (monitor index, edge type) to edge info
-    // Using monitor index instead of HMONITOR because HMONITOR handles can change
-    // when monitors are added/removed dynamically
-    std::map<std::pair<int, EdgeType>, MonitorEdge> m_edgeMap;
-
-    // Helper to resolve HMONITOR to monitor index at runtime
-    int GetMonitorIndex(HMONITOR monitor) const;
-
-    // Helper to get consistent HMONITOR from RECT
-    HMONITOR GetMonitorFromRect(const RECT& rect) const;
-    
-    void BuildEdgeMap();
-    void IdentifyOuterEdges();
-
-    // Check if two edges are adjacent (within tolerance)
-    bool EdgesAreAdjacent(const MonitorEdge& edge1, const MonitorEdge& edge2, int tolerance = 50) const;
-
-    // Find the opposite outer edge for wrapping
-    MonitorEdge FindOppositeOuterEdge(EdgeType fromEdge, int relativePosition) const;
-
-    // Calculate relative position along an edge (0.0 to 1.0)
-    double GetRelativePosition(const MonitorEdge& edge, int coordinate) const;
-
-    // Convert relative position to absolute coordinate on target edge
-    int GetAbsolutePosition(const MonitorEdge& edge, double relativePosition) const;
-};

src/modules/Workspaces/WorkspacesEditor/OverlayWindow.xaml.cs

@@ -2,11 +2,8 @@
 // The Microsoft Corporation licenses this file to you under the MIT license.
 // See the LICENSE file in the project root for more information.
 
-using System;
 using System.Windows;
 
-using WorkspacesEditor.Utils;
-
 namespace WorkspacesEditor
 {
     /// <summary>
@@ -14,40 +11,9 @@ namespace WorkspacesEditor
     /// </summary>
     public partial class OverlayWindow : Window
     {
-        private int _targetX;
-        private int _targetY;
-        private int _targetWidth;
-        private int _targetHeight;
-
         public OverlayWindow()
         {
             InitializeComponent();
-            SourceInitialized += OnWindowSourceInitialized;
-        }
-
-        /// <summary>
-        /// Sets the target bounds for the overlay window.
-        /// The window will be positioned using DPI-unaware context after initialization.
-        /// </summary>
-        public void SetTargetBounds(int x, int y, int width, int height)
-        {
-            _targetX = x;
-            _targetY = y;
-            _targetWidth = width;
-            _targetHeight = height;
-
-            // Set initial WPF properties (will be corrected after HWND creation)
-            Left = x;
-            Top = y;
-            Width = width;
-            Height = height;
-        }
-
-        private void OnWindowSourceInitialized(object sender, EventArgs e)
-        {
-            // Reposition window using DPI-unaware context to match the virtual coordinates.
-            // This fixes overlay positioning on mixed-DPI multi-monitor setups.
-            NativeMethods.SetWindowPositionDpiUnaware(this, _targetX, _targetY, _targetWidth, _targetHeight);
         }
     }
 }

src/modules/Workspaces/WorkspacesEditor/Utils/NativeMethods.cs

@@ -4,8 +4,6 @@
 
 using System;
 using System.Runtime.InteropServices;
-using System.Windows;
-using System.Windows.Interop;
 
 namespace WorkspacesEditor.Utils
 {
@@ -19,39 +17,6 @@ namespace WorkspacesEditor.Utils
         [return: MarshalAs(UnmanagedType.Bool)]
         public static extern bool MoveWindow(IntPtr hWnd, int X, int Y, int nWidth, int nHeight, bool bRepaint);
 
-        [DllImport("user32.dll", SetLastError = true)]
-        private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags);
-
-        [DllImport("user32.dll")]
-        private static extern IntPtr SetThreadDpiAwarenessContext(IntPtr dpiContext);
-
-        private const uint SWP_NOZORDER = 0x0004;
-        private const uint SWP_NOACTIVATE = 0x0010;
-
-        private static readonly IntPtr DPI_AWARENESS_CONTEXT_UNAWARE = new IntPtr(-1);
-
-        /// <summary>
-        /// Positions a WPF window using DPI-unaware context to match the virtual coordinates.
-        /// This fixes overlay positioning on mixed-DPI multi-monitor setups.
-        /// </summary>
-        public static void SetWindowPositionDpiUnaware(Window window, int x, int y, int width, int height)
-        {
-            var helper = new WindowInteropHelper(window).Handle;
-            if (helper != IntPtr.Zero)
-            {
-                // Temporarily switch to DPI-unaware context to position window.
-                IntPtr oldContext = SetThreadDpiAwarenessContext(DPI_AWARENESS_CONTEXT_UNAWARE);
-                try
-                {
-                    SetWindowPos(helper, IntPtr.Zero, x, y, width, height, SWP_NOZORDER | SWP_NOACTIVATE);
-                }
-                finally
-                {
-                    SetThreadDpiAwarenessContext(oldContext);
-                }
-            }
-        }
-
         [DllImport("USER32.DLL")]
         public static extern bool SetForegroundWindow(IntPtr hWnd);
 

src/modules/Workspaces/WorkspacesEditor/ViewModels/MainViewModel.cs

@@ -495,10 +495,10 @@ namespace WorkspacesEditor.ViewModels
             {
                 var bounds = screen.Bounds;
                 OverlayWindow overlayWindow = new OverlayWindow();
-
-                // Use DPI-unaware positioning to fix overlay on mixed-DPI multi-monitor setups
-                overlayWindow.SetTargetBounds(bounds.Left, bounds.Top, bounds.Width, bounds.Height);
-
+                overlayWindow.Top = bounds.Top;
+                overlayWindow.Left = bounds.Left;
+                overlayWindow.Width = bounds.Width;
+                overlayWindow.Height = bounds.Height;
                 overlayWindow.ShowActivated = true;
                 overlayWindow.Topmost = true;
                 overlayWindow.Show();

src/modules/cmdpal/ext/Microsoft.CmdPal.Ext.Apps/AppListItem.cs

@@ -17,25 +17,12 @@ public sealed partial class AppListItem : ListItem
 {
     private readonly AppCommand _appCommand;
     private readonly AppItem _app;
+    private readonly Lazy<Details> _details;
     private readonly Lazy<Task<IconInfo?>> _iconLoadTask;
-    private readonly Lazy<Task<Details>> _detailsLoadTask;
 
     private InterlockedBoolean _isLoadingIcon;
-    private InterlockedBoolean _isLoadingDetails;
 
-    public override IDetails? Details
-    {
-        get
-        {
-            if (_isLoadingDetails.Set())
-            {
-                _ = LoadDetailsAsync();
-            }
-
-            return base.Details;
-        }
-        set => base.Details = value;
-    }
+    public override IDetails? Details { get => _details.Value; set => base.Details = value; }
 
     public override IIconInfo? Icon
     {
@@ -65,20 +52,14 @@ public sealed partial class AppListItem : ListItem
 
         MoreCommands = AddPinCommands(_app.Commands!, isPinned);
 
-        _detailsLoadTask = new Lazy<Task<Details>>(BuildDetails);
-        _iconLoadTask = new Lazy<Task<IconInfo?>>(async () => await FetchIcon(useThumbnails));
-    }
+        _details = new Lazy<Details>(() =>
+        {
+            var t = BuildDetails();
+            t.Wait();
+            return t.Result;
+        });
 
-    private async Task LoadDetailsAsync()
-    {
-        try
-        {
-            Details = await _detailsLoadTask.Value;
-        }
-        catch (Exception ex)
-        {
-            Logger.LogWarning($"Failed to load details for {AppIdentifier}\n{ex}");
-        }
+        _iconLoadTask = new Lazy<Task<IconInfo?>>(async () => await FetchIcon(useThumbnails));
     }
 
     private async Task LoadIconAsync()
@@ -117,16 +98,18 @@ public sealed partial class AppListItem : ListItem
         }
         else
         {
-            // do nothing if we fail to load an icon.
-            // Logging it would be too NOISY, there's really no need.
-            if (!string.IsNullOrEmpty(_app.IcoPath))
+            try
             {
-                heroImage = await TryLoadThumbnail(_app.IcoPath, jumbo: true, logOnFailure: false);
+                var stream = await ThumbnailHelper.GetThumbnail(_app.ExePath, true);
+                if (stream is not null)
+                {
+                    heroImage = IconInfo.FromStream(stream);
+                }
             }
-
-            if (heroImage == null && !string.IsNullOrEmpty(_app.ExePath))
+            catch (Exception)
             {
-                heroImage = await TryLoadThumbnail(_app.ExePath, jumbo: true, logOnFailure: false);
+                // do nothing if we fail to load an icon.
+                // Logging it would be too NOISY, there's really no need.
             }
         }
 
@@ -149,18 +132,25 @@ public sealed partial class AppListItem : ListItem
 
         if (useThumbnails)
         {
-            if (!string.IsNullOrEmpty(_app.IcoPath))
+            try
             {
-                icon = await TryLoadThumbnail(_app.IcoPath, jumbo: false, logOnFailure: true);
+                var stream = await ThumbnailHelper.GetThumbnail(_app.ExePath);
+                if (stream is not null)
+                {
+                    icon = IconInfo.FromStream(stream);
+                }
+            }
+            catch (Exception ex)
+            {
+                Logger.LogDebug($"Failed to load icon for {AppIdentifier}:\n{ex}");
             }
 
-            if (icon == null && !string.IsNullOrEmpty(_app.ExePath))
-            {
-                icon = await TryLoadThumbnail(_app.ExePath, jumbo: false, logOnFailure: true);
-            }
+            icon = icon ?? new IconInfo(_app.IcoPath);
+        }
+        else
+        {
+            icon = new IconInfo(_app.IcoPath);
         }
-
-        icon ??= new IconInfo(_app.IcoPath);
 
         return icon;
     }
@@ -193,25 +183,4 @@ public sealed partial class AppListItem : ListItem
 
         return newCommands.ToArray();
     }
-
-    private async Task<IconInfo?> TryLoadThumbnail(string path, bool jumbo, bool logOnFailure)
-    {
-        try
-        {
-            var stream = await ThumbnailHelper.GetThumbnail(path, jumbo);
-            if (stream is not null)
-            {
-                return IconInfo.FromStream(stream);
-            }
-        }
-        catch (Exception ex)
-        {
-            if (logOnFailure)
-            {
-                Logger.LogDebug($"Failed to load icon {path} for {AppIdentifier}:\n{ex}");
-            }
-        }
-
-        return null;
-    }
 }

src/modules/cmdpal/ext/Microsoft.CmdPal.Ext.Apps/Programs/Win32Program.cs

@@ -1052,6 +1052,9 @@ public class Win32Program : IProgram
                 app.FullPath) :
             app.IcoPath;
 
+        icoPath = icoPath.EndsWith(".lnk", System.StringComparison.InvariantCultureIgnoreCase) ?
+            app.FullPath :
+            icoPath;
         return new AppItem()
         {
             Name = app.Name,

src/modules/colorPicker/ColorPickerUI/Controls/ColorFormatControl.xaml

@@ -140,7 +140,7 @@
             <TextBlock
                 x:Name="FormatNameTextBlock"
                 VerticalAlignment="Center"
-                Foreground="{DynamicResource TextFillColorPrimaryBrush}"
+                Foreground="{DynamicResource TextFillColorSecondaryBrush}"
                 Style="{StaticResource CaptionTextBlockStyle}"
                 TextTrimming="CharacterEllipsis" />
 

src/modules/imageresizer/ui/ImageResizerUI.csproj

@@ -27,13 +27,13 @@
     <ApplicationIcon>Resources\ImageResizer.ico</ApplicationIcon>
   </PropertyGroup>
 
-  <!-- <PropertyGroup>
+  <PropertyGroup>
     <ApplicationManifest>ImageResizerUI.dev.manifest</ApplicationManifest>
   </PropertyGroup>
 
   <PropertyGroup Condition="'$(CIBuild)'=='true'">
     <ApplicationManifest>ImageResizerUI.prod.manifest</ApplicationManifest>
-  </PropertyGroup> -->
+  </PropertyGroup>
 
   <ItemGroup>
     <EmbeddedResource Update="Properties\Resources.resx">

src/modules/peek/Peek.UI/PeekXAML/MainWindow.xaml.cs

@@ -197,10 +197,16 @@ namespace Peek.UI
 
             ViewModel.Initialize(selectedItem);
 
-            // If no files were found (e.g., user is typing in rename/search box, or in virtual folders),
-            // don't show anything - just return silently to avoid stealing focus
+            // If no files were found (e.g., in virtual folders like Home/Recent), show an error
             if (ViewModel.CurrentItem == null)
             {
+                Logger.LogInfo("Peek: No files found to preview, showing error.");
+                var errorMessage = ResourceLoaderInstance.ResourceLoader.GetString("NoFilesSelected");
+                ViewModel.ShowError(errorMessage);
+
+                // Still show the window so user can see the warning
+                this.Show();
+                WindowHelpers.BringToForeground(this.GetWindowHandle());
                 return;
             }
 

src/modules/powerrename/lib/PowerRenameRegEx.cpp

@@ -33,27 +33,23 @@ static std::wstring SanitizeAndNormalize(const std::wstring& input)
 
     // Normalize to NFC (Precomposed).
     // Get the size needed for the normalized string, including null terminator.
-    int sizeEstimate = NormalizeString(NormalizationC, sanitized.c_str(), -1, nullptr, 0);
-    if (sizeEstimate <= 0)
+    int size = NormalizeString(NormalizationC, sanitized.c_str(), -1, nullptr, 0);
+    if (size <= 0)
     {
         return sanitized; // Return unaltered if normalization fails.
     }
 
     // Perform the normalization.
     std::wstring normalized;
-    normalized.resize(sizeEstimate);
-    int actualSize = NormalizeString(NormalizationC, sanitized.c_str(), -1, &normalized[0], sizeEstimate);
+    normalized.resize(size);
+    NormalizeString(NormalizationC, sanitized.c_str(), -1, &normalized[0], size);
 
-    if (actualSize <= 0)
+    // Remove the explicit null terminator added by NormalizeString.
+    if (!normalized.empty() && normalized.back() == L'\0')
     {
-        // Normalization failed, return sanitized string.
-        return sanitized;
+        normalized.pop_back();
     }
 
-    // Resize to actual size minus the null terminator.
-    // actualSize includes the null terminator when input length is -1.
-    normalized.resize(static_cast<size_t>(actualSize) - 1);
-
     return normalized;
 }
 

src/modules/powerrename/unittests/CommonRegExTests.h

@@ -695,38 +695,6 @@ TEST_METHOD(VerifyUnicodeAndWhitespaceNormalizationRegex)
     VerifyNormalizationHelper(UseRegularExpressions);
 }
 
-TEST_METHOD(VerifyRegexMetacharacterDollarSign)
-{
-    CComPtr<IPowerRenameRegEx> renameRegEx;
-    Assert::IsTrue(CPowerRenameRegEx::s_CreateInstance(&renameRegEx) == S_OK);
-    DWORD flags = UseRegularExpressions;
-    Assert::IsTrue(renameRegEx->PutFlags(flags) == S_OK);
-
-    PWSTR result = nullptr;
-    Assert::IsTrue(renameRegEx->PutSearchTerm(L"$") == S_OK);
-    Assert::IsTrue(renameRegEx->PutReplaceTerm(L"_end") == S_OK);
-    unsigned long index = {};
-    Assert::IsTrue(renameRegEx->Replace(L"test.txt", &result, index) == S_OK);
-    Assert::AreEqual(L"test.txt_end", result);
-    CoTaskMemFree(result);
-}
-
-TEST_METHOD(VerifyRegexMetacharacterCaret)
-{
-    CComPtr<IPowerRenameRegEx> renameRegEx;
-    Assert::IsTrue(CPowerRenameRegEx::s_CreateInstance(&renameRegEx) == S_OK);
-    DWORD flags = UseRegularExpressions;
-    Assert::IsTrue(renameRegEx->PutFlags(flags) == S_OK);
-
-    PWSTR result = nullptr;
-    Assert::IsTrue(renameRegEx->PutSearchTerm(L"^") == S_OK);
-    Assert::IsTrue(renameRegEx->PutReplaceTerm(L"start_") == S_OK);
-    unsigned long index = {};
-    Assert::IsTrue(renameRegEx->Replace(L"test.txt", &result, index) == S_OK);
-    Assert::AreEqual(L"start_test.txt", result);
-    CoTaskMemFree(result);
-}
-
 #ifndef TESTS_PARTIAL
 };
 }

src/runner/Resources.resx

@@ -173,10 +173,6 @@
     <value>Settings\tDouble-click</value>
     <comment>Don't localize "\t" as that is what separates the click portion to be right aligned in the menu.</comment>
   </data>
-  <data name="SETTINGS_MENU_TEXT_LEFTCLICK" xml:space="preserve">
-    <value>Settings\tLeft-click</value>
-    <comment>Don't localize "\t" as that is what separates the click portion to be right aligned in the menu. This is shown when Quick Access is disabled.</comment>
-  </data>
   <data name="DOCUMENTATION_MENU_TEXT" xml:space="preserve">
     <value>Documentation</value>
   </data>

src/runner/trace.cpp

@@ -81,36 +81,3 @@ void Trace::UpdateDownloadCompleted(bool success, const std::wstring& version)
         TraceLoggingBoolean(TRUE, "UTCReplace_AppSessionGuid"),
         TraceLoggingKeyword(PROJECT_KEYWORD_MEASURE));
 }
-
-void Trace::TrayIconLeftClick(bool quickAccessEnabled)
-{
-    TraceLoggingWriteWrapper(
-        g_hProvider,
-        "TrayIcon_LeftClick",
-        TraceLoggingBoolean(quickAccessEnabled, "QuickAccessEnabled"),
-        ProjectTelemetryPrivacyDataTag(ProjectTelemetryTag_ProductAndServicePerformance),
-        TraceLoggingBoolean(TRUE, "UTCReplace_AppSessionGuid"),
-        TraceLoggingKeyword(PROJECT_KEYWORD_MEASURE));
-}
-
-void Trace::TrayIconDoubleClick(bool quickAccessEnabled)
-{
-    TraceLoggingWriteWrapper(
-        g_hProvider,
-        "TrayIcon_DoubleClick",
-        TraceLoggingBoolean(quickAccessEnabled, "QuickAccessEnabled"),
-        ProjectTelemetryPrivacyDataTag(ProjectTelemetryTag_ProductAndServicePerformance),
-        TraceLoggingBoolean(TRUE, "UTCReplace_AppSessionGuid"),
-        TraceLoggingKeyword(PROJECT_KEYWORD_MEASURE));
-}
-
-void Trace::TrayIconRightClick(bool quickAccessEnabled)
-{
-    TraceLoggingWriteWrapper(
-        g_hProvider,
-        "TrayIcon_RightClick",
-        TraceLoggingBoolean(quickAccessEnabled, "QuickAccessEnabled"),
-        ProjectTelemetryPrivacyDataTag(ProjectTelemetryTag_ProductAndServicePerformance),
-        TraceLoggingBoolean(TRUE, "UTCReplace_AppSessionGuid"),
-        TraceLoggingKeyword(PROJECT_KEYWORD_MEASURE));
-}

src/runner/trace.h

@@ -13,9 +13,4 @@ public:
     // Auto-update telemetry
     static void UpdateCheckCompleted(bool success, bool updateAvailable, const std::wstring& fromVersion, const std::wstring& toVersion);
     static void UpdateDownloadCompleted(bool success, const std::wstring& version);
-
-    // Tray icon interaction telemetry
-    static void TrayIconLeftClick(bool quickAccessEnabled);
-    static void TrayIconDoubleClick(bool quickAccessEnabled);
-    static void TrayIconRightClick(bool quickAccessEnabled);
 };

src/runner/tray_icon.cpp

@@ -7,7 +7,6 @@
 #include "centralized_kb_hook.h"
 #include "quick_access_host.h"
 #include "hotkey_conflict_detector.h"
-#include "trace.h"
 #include <Windows.h>
 
 #include <common/utils/resources.h>
@@ -15,7 +14,6 @@
 #include <common/logger/logger.h>
 #include <common/utils/elevation.h>
 #include <common/Themes/theme_listener.h>
-#include <common/Themes/theme_helpers.h>
 #include "bug_report.h"
 
 namespace
@@ -41,7 +39,6 @@ namespace
     bool double_click_timer_running = false;
     bool double_clicked = false;
     POINT tray_icon_click_point;
-    std::optional<bool> last_quick_access_state; // Track the last known Quick Access state
 
     static ThemeListener theme_listener;
     static bool theme_adaptive_enabled = false;
@@ -132,9 +129,6 @@ void click_timer_elapsed()
     double_click_timer_running = false;
     if (!double_clicked)
     {
-        // Log telemetry for single click (confirmed it's not a double click)
-        Trace::TrayIconLeftClick(get_general_settings().enableQuickAccess);
-
         if (get_general_settings().enableQuickAccess)
         {
             open_quick_access_flyout_window();
@@ -200,21 +194,6 @@ LRESULT __stdcall tray_icon_window_proc(HWND window, UINT message, WPARAM wparam
             case WM_RBUTTONUP:
             case WM_CONTEXTMENU:
             {
-                bool quick_access_enabled = get_general_settings().enableQuickAccess;
-
-                // Log telemetry
-                Trace::TrayIconRightClick(quick_access_enabled);
-
-                // Reload menu if Quick Access state has changed or is first time
-                if (h_menu && (!last_quick_access_state.has_value() || quick_access_enabled != last_quick_access_state.value()))
-                {
-                    DestroyMenu(h_menu);
-                    h_menu = nullptr;
-                    h_sub_menu = nullptr;
-                }
-
-                last_quick_access_state = quick_access_enabled;
-
                 if (!h_menu)
                 {
                     h_menu = LoadMenu(reinterpret_cast<HINSTANCE>(&__ImageBase), MAKEINTRESOURCE(ID_TRAY_MENU));
@@ -222,39 +201,17 @@ LRESULT __stdcall tray_icon_window_proc(HWND window, UINT message, WPARAM wparam
                 if (h_menu)
                 {
                     static std::wstring settings_menuitem_label = GET_RESOURCE_STRING(IDS_SETTINGS_MENU_TEXT);
-                    static std::wstring settings_menuitem_label_leftclick = GET_RESOURCE_STRING(IDS_SETTINGS_MENU_TEXT_LEFTCLICK);
                     static std::wstring close_menuitem_label = GET_RESOURCE_STRING(IDS_CLOSE_MENU_TEXT);
                     static std::wstring submit_bug_menuitem_label = GET_RESOURCE_STRING(IDS_SUBMIT_BUG_TEXT);
                     static std::wstring documentation_menuitem_label = GET_RESOURCE_STRING(IDS_DOCUMENTATION_MENU_TEXT);
                     static std::wstring quick_access_menuitem_label = GET_RESOURCE_STRING(IDS_QUICK_ACCESS_MENU_TEXT);
-
-                    // Update Settings menu text based on Quick Access state
-                    if (quick_access_enabled)
-                    {
-                        change_menu_item_text(ID_SETTINGS_MENU_COMMAND, settings_menuitem_label.data());
-                    }
-                    else
-                    {
-                        change_menu_item_text(ID_SETTINGS_MENU_COMMAND, settings_menuitem_label_leftclick.data());
-                    }
-
+                    change_menu_item_text(ID_SETTINGS_MENU_COMMAND, settings_menuitem_label.data());
                     change_menu_item_text(ID_CLOSE_MENU_COMMAND, close_menuitem_label.data());
                     change_menu_item_text(ID_REPORT_BUG_COMMAND, submit_bug_menuitem_label.data());
                     bool bug_report_disabled = is_bug_report_running();
                     EnableMenuItem(h_sub_menu, ID_REPORT_BUG_COMMAND, MF_BYCOMMAND | (bug_report_disabled ? MF_GRAYED : MF_ENABLED));
                     change_menu_item_text(ID_DOCUMENTATION_MENU_COMMAND, documentation_menuitem_label.data());
                     change_menu_item_text(ID_QUICK_ACCESS_MENU_COMMAND, quick_access_menuitem_label.data());
-
-                    // Hide or show Quick Access menu item based on setting
-                    if (!h_sub_menu)
-                    {
-                        h_sub_menu = GetSubMenu(h_menu, 0);
-                    }
-                    if (!quick_access_enabled)
-                    {
-                        // Remove Quick Access menu item when disabled
-                        DeleteMenu(h_sub_menu, ID_QUICK_ACCESS_MENU_COMMAND, MF_BYCOMMAND);
-                    }
                 }
                 if (!h_sub_menu)
                 {
@@ -285,9 +242,6 @@ LRESULT __stdcall tray_icon_window_proc(HWND window, UINT message, WPARAM wparam
             }
             case WM_LBUTTONDBLCLK:
             {
-                // Log telemetry
-                Trace::TrayIconDoubleClick(get_general_settings().enableQuickAccess);
-
                 double_clicked = true;
                 open_settings_window(std::nullopt);
                 break;
@@ -339,7 +293,7 @@ static void handle_theme_change()
 {
     if (theme_adaptive_enabled)
     {
-        tray_icon_data.hIcon = get_icon(ThemeHelpers::GetSystemTheme());
+        tray_icon_data.hIcon = get_icon(theme_listener.AppTheme);
         Shell_NotifyIcon(NIM_MODIFY, &tray_icon_data);
     }
 }
@@ -356,7 +310,7 @@ void start_tray_icon(bool isProcessElevated, bool theme_adaptive)
 {
     theme_adaptive_enabled = theme_adaptive;
     auto h_instance = reinterpret_cast<HINSTANCE>(&__ImageBase);
-    HICON const icon = theme_adaptive ? get_icon(ThemeHelpers::GetSystemTheme()) : LoadIcon(h_instance, MAKEINTRESOURCE(APPICON));
+    HICON const icon = theme_adaptive ? get_icon(theme_listener.AppTheme) : LoadIcon(h_instance, MAKEINTRESOURCE(APPICON));
     if (icon)
     {
         UINT id_tray_icon = 1;
@@ -403,7 +357,7 @@ void start_tray_icon(bool isProcessElevated, bool theme_adaptive)
         ChangeWindowMessageFilterEx(hwnd, WM_COMMAND, MSGFLT_ALLOW, nullptr);
 
         tray_icon_created = Shell_NotifyIcon(NIM_ADD, &tray_icon_data) == TRUE;
-        theme_listener.AddSystemThemeChangedHandler(&handle_theme_change);
+        theme_listener.AddChangedHandler(&handle_theme_change);
 
         // Register callback to update bug report menu item status
         BugReportManager::instance().register_callback([](bool isRunning) {
@@ -435,7 +389,7 @@ void set_tray_icon_theme_adaptive(bool theme_adaptive)
 
     if (theme_adaptive)
     {
-        icon = get_icon(ThemeHelpers::GetSystemTheme());
+        icon = get_icon(theme_listener.AppTheme);
         if (!icon)
         {
             Logger::warn(L"set_tray_icon_theme_adaptive: Failed to load theme adaptive icon, falling back to default");

src/settings-ui/QuickAccess.UI/QuickAccessXAML/MainWindow.xaml

@@ -15,6 +15,7 @@
     IsMaximizable="False"
     IsMinimizable="False"
     IsResizable="False"
+    IsShownInSwitchers="False"
     IsTitleBarVisible="False"
     mc:Ignorable="d">
     <winuiEx:WindowEx.Backdrop>

src/settings-ui/QuickAccess.UI/QuickAccessXAML/MainWindow.xaml.cs

@@ -305,17 +305,7 @@ public sealed partial class MainWindow : WindowEx, IDisposable
             return;
         }
 
-        try
-        {
-            _appWindow.IsShownInSwitchers = false;
-        }
-        catch (NotImplementedException)
-        {
-            // WinUI Will throw if explorer is not running, safely ignore
-        }
-        catch (Exception)
-        {
-        }
+        _appWindow.IsShownInSwitchers = false;
     }
 
     private bool CloakWindow()

src/settings-ui/Settings.UI.Library/AdvancedPasteAdditionalActions.cs

@@ -10,10 +10,6 @@ namespace Microsoft.PowerToys.Settings.UI.Library;
 
 public sealed class AdvancedPasteAdditionalActions
 {
-    private AdvancedPasteAdditionalAction _imageToText = new();
-    private AdvancedPastePasteAsFileAction _pasteAsFile = new();
-    private AdvancedPasteTranscodeAction _transcode = new();
-
     public static class PropertyNames
     {
         public const string ImageToText = "image-to-text";
@@ -22,25 +18,13 @@ public sealed class AdvancedPasteAdditionalActions
     }
 
     [JsonPropertyName(PropertyNames.ImageToText)]
-    public AdvancedPasteAdditionalAction ImageToText
-    {
-        get => _imageToText;
-        init => _imageToText = value ?? new();
-    }
+    public AdvancedPasteAdditionalAction ImageToText { get; init; } = new();
 
     [JsonPropertyName(PropertyNames.PasteAsFile)]
-    public AdvancedPastePasteAsFileAction PasteAsFile
-    {
-        get => _pasteAsFile;
-        init => _pasteAsFile = value ?? new();
-    }
+    public AdvancedPastePasteAsFileAction PasteAsFile { get; init; } = new();
 
     [JsonPropertyName(PropertyNames.Transcode)]
-    public AdvancedPasteTranscodeAction Transcode
-    {
-        get => _transcode;
-        init => _transcode = value ?? new();
-    }
+    public AdvancedPasteTranscodeAction Transcode { get; init; } = new();
 
     public IEnumerable<IAdvancedPasteAction> GetAllActions()
     {

src/settings-ui/Settings.UI.Library/AdvancedPastePasteAsFileAction.cs

@@ -34,21 +34,21 @@ public sealed class AdvancedPastePasteAsFileAction : Observable, IAdvancedPasteA
     public AdvancedPasteAdditionalAction PasteAsTxtFile
     {
         get => _pasteAsTxtFile;
-        init => Set(ref _pasteAsTxtFile, value ?? new());
+        init => Set(ref _pasteAsTxtFile, value);
     }
 
     [JsonPropertyName(PropertyNames.PasteAsPngFile)]
     public AdvancedPasteAdditionalAction PasteAsPngFile
     {
         get => _pasteAsPngFile;
-        init => Set(ref _pasteAsPngFile, value ?? new());
+        init => Set(ref _pasteAsPngFile, value);
     }
 
     [JsonPropertyName(PropertyNames.PasteAsHtmlFile)]
     public AdvancedPasteAdditionalAction PasteAsHtmlFile
     {
         get => _pasteAsHtmlFile;
-        init => Set(ref _pasteAsHtmlFile, value ?? new());
+        init => Set(ref _pasteAsHtmlFile, value);
     }
 
     [JsonIgnore]

src/settings-ui/Settings.UI.Library/AdvancedPasteProperties.cs

@@ -93,11 +93,11 @@ namespace Microsoft.PowerToys.Settings.UI.Library
 
         [JsonPropertyName("custom-actions")]
         [CmdConfigureIgnoreAttribute]
-        public AdvancedPasteCustomActions CustomActions { get; set; }
+        public AdvancedPasteCustomActions CustomActions { get; init; }
 
         [JsonPropertyName("additional-actions")]
         [CmdConfigureIgnoreAttribute]
-        public AdvancedPasteAdditionalActions AdditionalActions { get; set; }
+        public AdvancedPasteAdditionalActions AdditionalActions { get; init; }
 
         [JsonPropertyName("paste-ai-configuration")]
         [CmdConfigureIgnoreAttribute]

src/settings-ui/Settings.UI.Library/AdvancedPasteTranscodeAction.cs

@@ -32,14 +32,14 @@ public sealed class AdvancedPasteTranscodeAction : Observable, IAdvancedPasteAct
     public AdvancedPasteAdditionalAction TranscodeToMp3
     {
         get => _transcodeToMp3;
-        init => Set(ref _transcodeToMp3, value ?? new());
+        init => Set(ref _transcodeToMp3, value);
     }
 
     [JsonPropertyName(PropertyNames.TranscodeToMp4)]
     public AdvancedPasteAdditionalAction TranscodeToMp4
     {
         get => _transcodeToMp4;
-        init => Set(ref _transcodeToMp4, value ?? new());
+        init => Set(ref _transcodeToMp4, value);
     }
 
     [JsonIgnore]

src/settings-ui/Settings.UI.Library/CursorWrapProperties.cs

@@ -22,19 +22,11 @@ namespace Microsoft.PowerToys.Settings.UI.Library
         [JsonPropertyName("disable_wrap_during_drag")]
         public BoolProperty DisableWrapDuringDrag { get; set; }
 
-        [JsonPropertyName("wrap_mode")]
-        public IntProperty WrapMode { get; set; }
-
-        [JsonPropertyName("disable_cursor_wrap_on_single_monitor")]
-        public BoolProperty DisableCursorWrapOnSingleMonitor { get; set; }
-
         public CursorWrapProperties()
         {
             ActivationShortcut = DefaultActivationShortcut;
             AutoActivate = new BoolProperty(false);
             DisableWrapDuringDrag = new BoolProperty(true);
-            WrapMode = new IntProperty(0); // 0=Both (default), 1=VerticalOnly, 2=HorizontalOnly
-            DisableCursorWrapOnSingleMonitor = new BoolProperty(false);
         }
     }
 }

src/settings-ui/Settings.UI.Library/CursorWrapSettings.cs

@@ -47,23 +47,7 @@ namespace Microsoft.PowerToys.Settings.UI.Library
         // This can be utilized in the future if the settings.json file is to be modified/deleted.
         public bool UpgradeSettingsConfiguration()
         {
-            bool settingsUpgraded = false;
-
-            // Add WrapMode property if it doesn't exist (for users upgrading from older versions)
-            if (Properties.WrapMode == null)
-            {
-                Properties.WrapMode = new IntProperty(0); // Default to Both
-                settingsUpgraded = true;
-            }
-
-            // Add DisableCursorWrapOnSingleMonitor property if it doesn't exist (for users upgrading from older versions)
-            if (Properties.DisableCursorWrapOnSingleMonitor == null)
-            {
-                Properties.DisableCursorWrapOnSingleMonitor = new BoolProperty(false); // Default to false
-                settingsUpgraded = true;
-            }
-
-            return settingsUpgraded;
+            return false;
         }
     }
 }

src/settings-ui/Settings.UI/SettingsXAML/Views/MouseUtilsPage.xaml

@@ -47,16 +47,6 @@
                             <tkcontrols:SettingsCard ContentAlignment="Left" IsEnabled="{x:Bind ViewModel.IsCursorWrapEnabled, Mode=OneWay}">
                                 <CheckBox x:Uid="MouseUtils_CursorWrap_DisableWrapDuringDrag" IsChecked="{x:Bind ViewModel.CursorWrapDisableWrapDuringDrag, Mode=TwoWay}" />
                             </tkcontrols:SettingsCard>
-                            <tkcontrols:SettingsCard Name="MouseUtilsCursorWrapWrapMode" x:Uid="MouseUtils_CursorWrap_WrapMode">
-                                <ComboBox MinWidth="{StaticResource SettingActionControlMinWidth}" SelectedIndex="{x:Bind Path=ViewModel.CursorWrapWrapMode, Mode=TwoWay}">
-                                    <ComboBoxItem x:Uid="MouseUtils_CursorWrap_WrapMode_Both" />
-                                    <ComboBoxItem x:Uid="MouseUtils_CursorWrap_WrapMode_VerticalOnly" />
-                                    <ComboBoxItem x:Uid="MouseUtils_CursorWrap_WrapMode_HorizontalOnly" />
-                                </ComboBox>
-                            </tkcontrols:SettingsCard>
-                            <tkcontrols:SettingsCard ContentAlignment="Left" IsEnabled="{x:Bind ViewModel.IsCursorWrapEnabled, Mode=OneWay}">
-                                <CheckBox x:Uid="MouseUtils_CursorWrap_DisableOnSingleMonitor" IsChecked="{x:Bind ViewModel.CursorWrapDisableOnSingleMonitor, Mode=TwoWay}" />
-                            </tkcontrols:SettingsCard>
                         </tkcontrols:SettingsExpander.Items>
                     </tkcontrols:SettingsExpander>
                 </controls:SettingsGroup>

src/settings-ui/Settings.UI/Strings/en-us/Resources.resw

@@ -2722,27 +2722,12 @@ From there, simply click on one of the supported files in the File Explorer and
   <data name="MouseUtils_CursorWrap_DisableWrapDuringDrag.Content" xml:space="preserve">
     <value>Disable wrapping while dragging</value>
   </data>
-  <data name="MouseUtils_CursorWrap_DisableOnSingleMonitor.Content" xml:space="preserve">
-    <value>Disable wrapping when using a single monitor</value>
-  </data>	
   <data name="MouseUtils_CursorWrap_AutoActivate.Header" xml:space="preserve">
     <value>Auto-activate on startup</value>
   </data>
   <data name="MouseUtils_CursorWrap_AutoActivate.Content" xml:space="preserve">
     <value>Automatically activate on utility startup</value>
   </data>
-  <data name="MouseUtils_CursorWrap_WrapMode.Header" xml:space="preserve">
-    <value>Wrap mode</value>
-  </data>
-  <data name="MouseUtils_CursorWrap_WrapMode_VerticalOnly.Content" xml:space="preserve">
-    <value>Vertical only</value>
-  </data>
-  <data name="MouseUtils_CursorWrap_WrapMode_HorizontalOnly.Content" xml:space="preserve">
-    <value>Horizontal only</value>
-  </data>
-  <data name="MouseUtils_CursorWrap_WrapMode_Both.Content" xml:space="preserve">
-    <value>Vertical and horizontal</value>
-  </data>
   <data name="Oobe_MouseUtils_MousePointerCrosshairs.Text" xml:space="preserve">
     <value>Mouse Pointer Crosshairs</value>
     <comment>Mouse as in the hardware peripheral.</comment>

src/settings-ui/Settings.UI/ViewModels/AdvancedPasteViewModel.cs

@@ -76,24 +76,16 @@ namespace Microsoft.PowerToys.Settings.UI.ViewModels
 
             GeneralSettingsConfig = settingsRepository.SettingsConfig;
 
-            // To obtain the settings configurations of Advanced Paste.
-            ArgumentNullException.ThrowIfNull(advancedPasteSettingsRepository);
+            // To obtain the settings configurations of Fancy zones.
+            ArgumentNullException.ThrowIfNull(settingsRepository);
 
             _dispatcherQueue = DispatcherQueue.GetForCurrentThread();
 
             _settingsUtils = settingsUtils ?? throw new ArgumentNullException(nameof(settingsUtils));
 
-            _advancedPasteSettings = advancedPasteSettingsRepository.SettingsConfig ?? throw new ArgumentException("SettingsConfig cannot be null", nameof(advancedPasteSettingsRepository));
+            ArgumentNullException.ThrowIfNull(advancedPasteSettingsRepository);
 
-            if (_advancedPasteSettings.Properties is null)
-            {
-                throw new ArgumentException("AdvancedPasteSettings.Properties cannot be null", nameof(advancedPasteSettingsRepository));
-            }
-
-            // Ensure AdditionalActions and CustomActions are initialized to prevent null reference exceptions
-            // This handles legacy settings files that may be missing these properties
-            _advancedPasteSettings.Properties.AdditionalActions ??= new AdvancedPasteAdditionalActions();
-            _advancedPasteSettings.Properties.CustomActions ??= new AdvancedPasteCustomActions();
+            _advancedPasteSettings = advancedPasteSettingsRepository.SettingsConfig;
 
             AttachConfigurationHandlers();
 
@@ -101,7 +93,7 @@ namespace Microsoft.PowerToys.Settings.UI.ViewModels
             SendConfigMSG = ipcMSGCallBackFunc;
 
             _additionalActions = _advancedPasteSettings.Properties.AdditionalActions;
-            _customActions = _advancedPasteSettings.Properties.CustomActions.Value ?? new ObservableCollection<AdvancedPasteCustomAction>();
+            _customActions = _advancedPasteSettings.Properties.CustomActions.Value;
 
             SetupSettingsFileWatcher();
 
@@ -477,13 +469,7 @@ namespace Microsoft.PowerToys.Settings.UI.ViewModels
 
         public PasteAIConfiguration PasteAIConfiguration
         {
-            get
-            {
-                // Ensure PasteAIConfiguration is never null for XAML binding
-                _advancedPasteSettings.Properties.PasteAIConfiguration ??= new PasteAIConfiguration();
-                return _advancedPasteSettings.Properties.PasteAIConfiguration;
-            }
-
+            get => _advancedPasteSettings.Properties.PasteAIConfiguration;
             set
             {
                 if (!ReferenceEquals(value, _advancedPasteSettings.Properties.PasteAIConfiguration))

src/settings-ui/Settings.UI/ViewModels/MouseUtilsViewModel.cs

@@ -113,12 +113,6 @@ namespace Microsoft.PowerToys.Settings.UI.ViewModels
             // Null-safe access in case property wasn't upgraded yet - default to TRUE
             _cursorWrapDisableWrapDuringDrag = CursorWrapSettingsConfig.Properties.DisableWrapDuringDrag?.Value ?? true;
 
-            // Null-safe access in case property wasn't upgraded yet - default to 0 (Both)
-            _cursorWrapWrapMode = CursorWrapSettingsConfig.Properties.WrapMode?.Value ?? 0;
-
-            // Null-safe access in case property wasn't upgraded yet - default to false
-            _cursorWrapDisableOnSingleMonitor = CursorWrapSettingsConfig.Properties.DisableCursorWrapOnSingleMonitor?.Value ?? false;
-
             int isEnabled = 0;
 
             Utilities.NativeMethods.SystemParametersInfo(Utilities.NativeMethods.SPI_GETCLIENTAREAANIMATION, 0, ref isEnabled, 0);
@@ -1006,6 +1000,13 @@ namespace Microsoft.PowerToys.Settings.UI.ViewModels
                     GeneralSettingsConfig.Enabled.CursorWrap = value;
                     OnPropertyChanged(nameof(IsCursorWrapEnabled));
 
+                    // Auto-enable the AutoActivate setting when CursorWrap is enabled
+                    // This ensures cursor wrapping is active immediately after enabling
+                    if (value && !_cursorWrapAutoActivate)
+                    {
+                        CursorWrapAutoActivate = true;
+                    }
+
                     OutGoingGeneralSettings outgoing = new OutGoingGeneralSettings(GeneralSettingsConfig);
                     SendConfigMSG(outgoing.ToString());
 
@@ -1082,62 +1083,6 @@ namespace Microsoft.PowerToys.Settings.UI.ViewModels
             }
         }
 
-        public int CursorWrapWrapMode
-        {
-            get
-            {
-                return _cursorWrapWrapMode;
-            }
-
-            set
-            {
-                if (value != _cursorWrapWrapMode)
-                {
-                    _cursorWrapWrapMode = value;
-
-                    // Ensure the property exists before setting value
-                    if (CursorWrapSettingsConfig.Properties.WrapMode == null)
-                    {
-                        CursorWrapSettingsConfig.Properties.WrapMode = new IntProperty(value);
-                    }
-                    else
-                    {
-                        CursorWrapSettingsConfig.Properties.WrapMode.Value = value;
-                    }
-
-                    NotifyCursorWrapPropertyChanged();
-                }
-            }
-        }
-
-        public bool CursorWrapDisableOnSingleMonitor
-        {
-            get
-            {
-                return _cursorWrapDisableOnSingleMonitor;
-            }
-
-            set
-            {
-                if (value != _cursorWrapDisableOnSingleMonitor)
-                {
-                    _cursorWrapDisableOnSingleMonitor = value;
-
-                    // Ensure the property exists before setting value
-                    if (CursorWrapSettingsConfig.Properties.DisableCursorWrapOnSingleMonitor == null)
-                    {
-                        CursorWrapSettingsConfig.Properties.DisableCursorWrapOnSingleMonitor = new BoolProperty(value);
-                    }
-                    else
-                    {
-                        CursorWrapSettingsConfig.Properties.DisableCursorWrapOnSingleMonitor.Value = value;
-                    }
-
-                    NotifyCursorWrapPropertyChanged();
-                }
-            }
-        }
-
         public void NotifyCursorWrapPropertyChanged([CallerMemberName] string propertyName = null)
         {
             OnPropertyChanged(propertyName);
@@ -1209,7 +1154,5 @@ namespace Microsoft.PowerToys.Settings.UI.ViewModels
         private bool _isCursorWrapEnabled;
         private bool _cursorWrapAutoActivate;
         private bool _cursorWrapDisableWrapDuringDrag; // Will be initialized in constructor from settings
-        private int _cursorWrapWrapMode; // 0=Both, 1=VerticalOnly, 2=HorizontalOnly
-        private bool _cursorWrapDisableOnSingleMonitor; // Disable cursor wrap when only one monitor is connected
     }
 }