[CmdNotFound]Disable on Arm64 as there is no MSI installer for PowerShell 7.4 yet (#30759)

* [Command Not Found] Disable on Arm64

* Hide deps

* Update src/settings-ui/Settings.UI/Strings/en-us/Resources.resw

Co-authored-by: Jaime Bernardo <jaime@janeasystems.com>

* Update Resources.resw

---------

Co-authored-by: Jaime Bernardo <jaime@janeasystems.com>
Co-authored-by: Clint Rutkas <clint@rutkas.com>

.github/actions/spell-check/allow/allow.txt

@@ -1,13 +0,0 @@
-cloudai
-bkmeneguello
-FWest
-gdnbaselines
-github
-https
-obairka
-sdl
-ssh
-ubuntu
-unuing
-workarounds
-wil

.github/actions/spell-check/allow/code.txt

@@ -0,0 +1,134 @@
+# COLORS
+
+argb
+bgra
+BLACKONWHITE
+BLUEGRAY
+BRIGHTGREEN
+COLORONCOLOR
+DARKPURPLE
+DARKTEAL
+DARKYELLOW
+Farbraum
+ICEBLUE
+LIGHTORANGE
+LIGHTTURQUOISE
+NCol
+OLIVEGREEN
+PALEBLUE
+PArgb
+Pbgra
+WHITEONBLACK
+
+
+# FILES
+
+AYUV
+bak
+exa
+exabyte
+Gbits
+Gbps
+gcode
+Mbits
+MBs
+mkv
+msix
+nupkg
+petabyte
+resw
+resx
+Stereolithography
+terabyte
+UYVY
+xbf
+YUY
+YUYV
+YVU
+YVYU
+zipfolder
+
+
+# FONTS
+
+Consolas
+Neue
+Noto
+Roboto
+Segoe
+
+
+# IN URLs
+
+accessibilityinsights
+arik
+epicgames
+fwlink
+joefinapps
+lepo
+linkedin
+oblitum
+robmensching
+sinclairinat
+stylecop
+uipi
+yinwang
+
+
+# KEYS
+
+altdown
+BUTTONUP
+CTRLALTDEL
+Ctrls
+EXSEL
+HOLDENTER
+HOLDESC
+KBDLLHOOKSTRUCT
+keyevent
+LAlt
+LBUTTON
+LBUTTONDBLCLK
+LBUTTONDOWN
+LBUTTONUP
+LCONTROL
+LCtrl
+LEFTDOWN
+LEFTUP
+MBUTTON
+MBUTTONDBLCLK
+MBUTTONDOWN
+MBUTTONUP
+MIDDLEDOWN
+MIDDLEUP
+NCRBUTTONDBLCLK
+NCRBUTTONDOWN
+NCRBUTTONUP
+NUMLOCK
+RBUTTON
+RBUTTONDBLCLK
+RBUTTONDOWN
+RBUTTONUP
+RCONTROL
+RCtrl
+RIGHTDOWN
+RIGHTUP
+VKTAB
+winkey
+WMKEYDOWN
+WMKEYUP
+WMSYSKEYDOWN
+WMSYSKEYUP
+XBUTTON
+XBUTTONDBLCLK
+XBUTTONDOWN
+XBUTTONUP
+XDOWN
+
+
+# MATH
+
+artanh
+arsinh
+arcosh
+

.github/actions/spell-check/allow/names.txt

@@ -1,57 +1,155 @@
-ABradley
+# POWERTOYS
+
+alwaysontop
+colorpicker
+fancyzones
+imageresizer
+kbm
+keyboardmanager
+markdownpreviewhandler
+mwb
+oobe
+pasteplain
+poweraccent
+powerlauncher
+POWEROCR
+powerpreview
+powerrename
+powertoy
+powertoys
+previewpane
+ptrun
+registrypreview
+rooler
+scoobe
+shortcutguide
+videoconference
+
+
+# USERS
+
+alekhyareddy
 Aleks
+angularsen
+arjunbalgovind
 Ashish
-azchohfi
 Baltazar
 Bao
-bdoserror
+betadele
+betsegaw
+bricelam
 Chinh
+chrdavis
+Chrzan
+clayton
 Coplen
 crutkas
-dependabot
-Deuchert
+damienleroy
+davidegiacometti
+debian
+Delimarsky
+Deondre
 ductdo
-edwinzap
 Essey
+frankychen
+gabime
+Galaxi
 Garside
 Gershaft
 Gokce
 Guo
-hallatore
+hanselman
 Harmath
+Heiko
 Hemmerlein
+hlaueriksson
+Horvalds
+htcfreek
 Huynh
 Jaswal
 jefflord
+jyuwono
 Kamra
 Kantarci
 Karthick
 kevinguo
 Krigun
+Lambson
+Laute
+laviusmotileng
 Luecking
 Mahalingam
+Markovic
+martinchrzan
+martinmoene
+Melman
 Mikhayelyan
-mshtang
 Myrvold
-naveensrinivasan
-nVidia
+Nemeth
+nielslaute
+oldnewthing
+palenshus
+pedrolamas
+peteblois
 phoboslab
 Ponten
 Pooja
-robmen
+Quriz
+randyrants
+ricardosantos
 robmikh
+Rutkas
+ryanbodrug
+saahmedm
+sachaple
+Santossio
 Schoen
-skycommand
-snickler
-sinclairinat
-streamjsonrpc
+Sekan
+Seraphima
+skttl
+somil
+Soref
+stefan
 Szablewski
+Tadele
+talynone
+TBM
 tilovell
-TheJoeFin
 Triet
-Vidia
-WEX
-WWL
-yifan
+ycv
 Yuniardi
+yuyoyuppe
 Zoltan
+Zykova
+
+
+# OTHERS
+
+Controlz
+cortana
+fancymouse
+firefox
+Inkscape
+Markdig
+modernwpf
+Moq
+mozilla
+mspaint
+Newtonsoft
+onenote
+Quickime
+regedit
+roslyn
+Vanara
+WEX
+windowwalker
+winui
+winuiex
+wix
+wordpad
+WWL
+xamlstyler
+Xavalon
+Xbox
+Youdao
+

.github/actions/spell-check/allow/temporary.txt

@@ -1,11 +0,0 @@
-etw
-filetime
-flyouts
-lnks
-reparented
-screenshots
-SIDs
-subkeys
-TApp
-websites
-wmi

.github/actions/spell-check/excludes.txt

@@ -2,18 +2,19 @@
 (?:^|/)(?i)COPYRIGHT
 (?:^|/)(?i)LICEN[CS]E
 (?:^|/)3rdparty/
-(?:^|/)go\.sum$
 (?:^|/)FilePreviewCommon/Assets/Monaco/customLanguages/
 (?:^|/)FilePreviewCommon/Assets/Monaco/generateLanguagesJson.html
 (?:^|/)FilePreviewCommon/Assets/Monaco/index.html
 (?:^|/)FilePreviewCommon/Assets/Monaco/monaco_languages.json
 (?:^|/)FilePreviewCommon/Assets/Monaco/monacoSpecialLanguages.js
+(?:^|/)go\.sum$
 (?:^|/)monacoSRC/
 (?:^|/)package(?:-lock|)\.json$
 (?:^|/)Pipfile$
 (?:^|/)power-rename-ui-flags$
 (?:^|/)pyproject.toml
 (?:^|/)requirements(?:-dev|-doc|-test|)\.txt$
+(?:^|/)sample\.qoi$
 (?:^|/)timezones\.json$
 (?:^|/)vendor/
 (?:^|/)WindowsSettings\.json$
@@ -96,30 +97,30 @@
 ^\.gitmodules$
 ^\Q.github/workflows/spelling2.yml\E$
 ^\Q.pipelines/ESRPSigning_core.json\E$
-^\Qinstaller/PowerToysSetup/Settings.wxs\E$
-^\Qsrc/common/ManagedCommon/ColorFormatHelper.cs\E$
 ^\Q.pipelines/sdl.gdnbaselines\E$
+^\Qinstaller/PowerToysSetup/Settings.wxs\E$
 ^\Qsrc/common/FilePreviewCommon/Assets/Monaco/monaco_languages.json\E$
+^\Qsrc/common/ManagedCommon/ColorFormatHelper.cs\E$
 ^\Qsrc/common/notifications/BackgroundActivatorDLL/cpp.hint\E$
 ^\Qsrc/modules/colorPicker/ColorPickerUI/Assets/ColorPicker/colorPicker.cur\E$
 ^\Qsrc/modules/colorPicker/ColorPickerUI/Shaders/GridShader.cso\E$
 ^\Qsrc/modules/MouseUtils/MouseJumpUI/MainForm.resx\E$
-^\Qsrc/modules/MouseWithoutBorders/App/Form/frmAbout.cs\E$
-^\Qsrc/modules/MouseWithoutBorders/ModuleInterface/generateSecurityDescriptor.h\E$
 ^\Qsrc/modules/MouseUtils/MouseJumpUI/NativeMethods/User32/UI/WindowsAndMessaging/User32.SYSTEM_METRICS_INDEX.cs\E$
+^\Qsrc/modules/MouseWithoutBorders/App/Form/frmAbout.cs\E$
 ^\Qsrc/modules/MouseWithoutBorders/App/Form/frmInputCallback.resx\E$
 ^\Qsrc/modules/MouseWithoutBorders/App/Form/frmLogon.resx\E$
 ^\Qsrc/modules/MouseWithoutBorders/App/Form/frmMatrix.resx\E$
 ^\Qsrc/modules/MouseWithoutBorders/App/Form/frmScreen.resx\E$
+^\Qsrc/modules/MouseWithoutBorders/ModuleInterface/generateSecurityDescriptor.h\E$
 ^\Qsrc/modules/peek/Peek.Common/NativeMethods.txt\E$
 ^\Qsrc/modules/previewpane/SvgPreviewHandler/SvgHTMLPreviewGenerator.cs\E$
 ^\Qsrc/modules/previewpane/UnitTests-StlThumbnailProvider/HelperFiles/sample.stl\E$
 ^\Qtools/project_template/ModuleTemplate/resource.h\E$
 ^doc/devdocs/akaLinks\.md$
-^src/modules/MouseWithoutBorders/App/Form/.*\.resx$
-^src/modules/MouseWithoutBorders/App/Form/.*\.Designer\.cs$
-^src/modules/MouseWithoutBorders/App/Helper/.*\.resx$
 ^src/modules/MouseWithoutBorders/App/.*/NativeMethods\.cs$
+^src/modules/MouseWithoutBorders/App/Form/.*\.Designer\.cs$
+^src/modules/MouseWithoutBorders/App/Form/.*\.resx$
+^src/modules/MouseWithoutBorders/App/Helper/.*\.resx$
 ^src/modules/previewpane/UnitTests-MarkdownPreviewHandler/HelperFiles/MarkdownWithHTMLImageTag.txt$
 ^tools/Verification scripts/Check preview handler registration\.ps1$
 ignore$

.github/actions/spell-check/patterns.txt

@@ -118,6 +118,9 @@ aka\.ms/[a-zA-Z0-9]+
 # YouTube url
 \b(?:(?:www\.|)youtube\.com|youtu.be)/(?:channel/|embed/|user/|playlist\?list=|watch\?v=|v/|)[-a-zA-Z0-9?&=_%]*
 
+# power shell gallery website
+\bpowershellgallery.com/[-_a-zA-Z0-9()=./%]*
+
 # uuid: (or CompGUIDPrefix)
 L?(["']|[-<({>]|\b)[0-9a-fA-F]{8}-(?:[0-9a-fA-F]{4}-){3}[0-9a-fA-F]{10,12}(?:\g{-1}|[<})>])
 

.github/policies/resourceManagement.yml

@@ -233,5 +233,14 @@ configuration:
       - addReply:
           reply: Hi! Thanks for making us aware of the problem. We raised the issue with our internal localization team. This issue should be fixed hopefully in the next version of PowerToys.
       description: 
+    - if:
+      - payloadType: Issue_Comment
+      - commentContains:
+          pattern: 'I would [like|love] [to help|helping|to contribute|contributing|to implement|implementing|to fix|fixing]'
+          isRegex: True
+      then:
+      - addReply:
+          reply: Hi! Your last comment indicates to our system, that you might want to contribute to this feature/fix this bug. Thank you! Please make us aware on our ["Would you like to contribute to PowerToys?" thread](https://github.com/microsoft/PowerToys/issues/28769), as we don't see all the comments. <br /><br />_I'm a bot (beep!) so please excuse any mistakes I may make_
+      description: 
 onFailure: 
 onSuccess: 

.github/workflows/spelling2.yml

@@ -107,31 +107,36 @@ jobs:
         use_sarif: ${{ (!github.event.pull_request || (github.event.pull_request.head.repo.full_name == github.repository)) && 1 }}
         extra_dictionary_limit: 20
         extra_dictionaries:
-          cspell:software-terms/dict/softwareTerms.txt
-          cspell:cpp/src/stdlib-cpp.txt
-          cspell:filetypes/filetypes.txt
-          cspell:cpp/src/stdlib-c.txt
-          cspell:python/src/python/python-lib.txt
-          cspell:lorem-ipsum/dictionary.txt
-          cspell:php/dict/php.txt
-          cspell:typescript/dict/typescript.txt
-          cspell:swift/src/swift.txt
-          cspell:fullstack/dict/fullstack.txt
-          cspell:node/dict/node.txt
-          cspell:dotnet/dict/dotnet.txt
-          cspell:django/dict/django.txt
-          cspell:python/src/python/python.txt
-          cspell:csharp/csharp.txt
-          cspell:python/src/common/extra.txt
-          cspell:cpp/src/compiler-msvc.txt
           cspell:aws/aws.txt
-          cspell:golang/dict/go.txt
-          cspell:java/src/java.txt
-          cspell:html/dict/html.txt
+          cspell:cpp/src/compiler-clang-attributes.txt
+          cspell:cpp/src/compiler-msvc.txt
+          cspell:cpp/src/lang-keywords.txt
+          cspell:cpp/src/stdlib-c.txt
+          cspell:cpp/src/stdlib-cmath.txt
+          cspell:cpp/src/stdlib-cpp.txt
+          cspell:csharp/csharp.txt
           cspell:css/dict/css.txt
-          cspell:k8s/dict/k8s.txt
+          cspell:django/dict/django.txt
+          cspell:dotnet/dict/dotnet.txt
+          cspell:filetypes/filetypes.txt
+          cspell:fullstack/dict/fullstack.txt
+          cspell:golang/dict/go.txt
+          cspell:html/dict/html.txt
+          cspell:java/src/java.txt
           cspell:java/src/java-terms.txt
+          cspell:k8s/dict/k8s.txt
+          cspell:lorem-ipsum/dictionary.txt
+          cspell:monkeyc/src/monkeyc_keywords.txt
+          cspell:node/dict/node.txt
+          cspell:php/dict/php.txt
           cspell:powershell/dict/powershell.txt
+          cspell:python/src/common/extra.txt
+          cspell:python/src/python/python.txt
+          cspell:python/src/python/python-lib.txt
+          cspell:scala/dict/scala.txt
+          cspell:software-terms/dict/softwareTerms.txt
+          cspell:swift/src/swift.txt
+          cspell:typescript/dict/typescript.txt
 
   comment-push:
     name: Report (Push)

.pipelines/ESRPSigning_core.json

@@ -28,7 +28,10 @@
 
                 "PowerToys.AlwaysOnTop.exe",
                 "PowerToys.AlwaysOnTopModuleInterface.dll",
-                
+
+                "PowerToys.CmdNotFoundModuleInterface.dll",
+                "PowerToys.CmdNotFound.dll",
+
                 "PowerToys.ColorPicker.dll",
                 "PowerToys.ColorPickerUI.dll",
                 "PowerToys.ColorPickerUI.exe",
@@ -73,6 +76,12 @@
                 "PowerToys.PdfThumbnailProviderCpp.dll",
                 "PowerToys.powerpreview.dll",
                 "PowerToys.PreviewHandlerCommon.dll",
+                "PowerToys.QoiPreviewHandler.dll",
+                "PowerToys.QoiPreviewHandler.exe",
+                "PowerToys.QoiPreviewHandlerCpp.dll",
+                "PowerToys.QoiThumbnailProvider.dll",
+                "PowerToys.QoiThumbnailProvider.exe",
+                "PowerToys.QoiThumbnailProviderCpp.dll",
                 "PowerToys.StlThumbnailProvider.dll",
                 "PowerToys.StlThumbnailProvider.exe",
                 "PowerToys.StlThumbnailProviderCpp.dll",
@@ -245,6 +254,7 @@
                 "Mages.Core.dll",
                 "JetBrains.Annotations.dll",
                 "NLog.Extensions.Logging.dll",
+                "getfilesiginforedist.dll",
                 "concrt140_app.dll",
                 "msvcp140_1_app.dll",
                 "msvcp140_2_app.dll",
@@ -289,6 +299,7 @@
                 "ColorCode.Core.dll", 
                 "ColorCode.UWP.dll",
                 "UnitsNet.dll",
+                "UtfUnknown.dll",
                 "Wpf.Ui.dll"
             ],
             "SigningInfo": {

.pipelines/applyXamlStyling.ps1

@@ -39,7 +39,7 @@ param(
 Write-Output "Use 'Help .\applyXamlStyling.ps1' for more info or '-Main' to run against all files."
 Write-Output ""
 Write-Output "Restoring dotnet tools..."
-dotnet tool restore
+dotnet tool restore --disable-parallel --no-cache
 
 if (-not $Passive)
 {
@@ -107,7 +107,7 @@ if (-not $Passive)
 else 
 {
     Write-Output "Checking all files (passively)"
-    $files = Get-ChildItem -Path "$PSScriptRoot\..\src\*.xaml" -Recurse | Select-Object -ExpandProperty FullName | Where-Object { $_ -notmatch "(\\obj\\)|(\\bin\\)|(\\x64\\)|(\\Generated Files\\PowerRenameXAML\\)|(\\launcher\\PowerLauncher\\)|(\\launcher\\Wox.Plugin\\)|(\\colorPicker\\ColorPickerUI\\)" }
+    $files = Get-ChildItem -Path "$PSScriptRoot\..\src\*.xaml" -Recurse | Select-Object -ExpandProperty FullName | Where-Object { $_ -notmatch "(\\obj\\)|(\\bin\\)|(\\x64\\)|(\\Generated Files\\PowerRenameXAML\\)|(\\colorPicker\\ColorPickerUI\\)" }
 
     if ($files.count -gt 0)
     {

.pipelines/ci/ci.yml

@@ -1,3 +1,4 @@
+# yaml-language-server: $schema=https://raw.githubusercontent.com/microsoft/azure-pipelines-vscode/main/service-schema.json
 trigger:
   batch: true
   branches:
@@ -9,21 +10,27 @@ trigger:
       - doc/*
       - temp/*
       - tools/*
+      - '**.md'
 
 pr:
   branches:
     include:
       - main
       - stable
-
+  paths:
+    exclude:
+      - '**.md'
+      - doc
+       
 #     0.0.yyMM.dd##
 #     0.0.1904.0900
 name: 0.0.$(Date:yyMM).$(Date:dd)$(Rev:rr)
 
 jobs:
+  - template: ./templates/build-powertoys-precheck.yml
   - template: ./templates/build-powertoys-ci.yml
     parameters:
-      platform: x64
+      platform: x64    
   - template: ./templates/build-powertoys-ci.yml
     parameters:
-      platform: arm64
+      platform: arm64

.pipelines/ci/templates/build-powertoys-ci.yml

@@ -6,6 +6,8 @@ parameters:
 jobs:
 - job: Build${{ parameters.platform }}${{ parameters.configuration }}
   displayName: Build ${{ parameters.platform }} ${{ parameters.configuration }}
+  dependsOn: Precheck
+  condition: and(succeeded(),ne(dependencies.Precheck.outputs['verifyBuildRequest.skipBuild'], 'Yes'))
   variables:
     BuildConfiguration: ${{ parameters.configuration }}
     BuildPlatform: ${{ parameters.platform }}
@@ -29,4 +31,4 @@ jobs:
   # when we renamed our main branch.
   - task: ms.vss-governance-buildtask.governance-build-task-component-detection.ComponentGovernanceComponentDetection@0
     displayName: 'Component Detection'
-    condition: and(succeededOrFailed(), not(eq(variables['Build.Reason'], 'PullRequest')))
+    condition: and(succeededOrFailed(), not(eq(variables['Build.Reason'], 'PullRequest')))

.pipelines/ci/templates/build-powertoys-precheck.yml

@@ -0,0 +1,38 @@
+# yaml-language-server: $schema=https://raw.githubusercontent.com/microsoft/azure-pipelines-vscode/master/service-schema.json
+jobs:
+- job: Precheck
+  pool:
+    demands: ImageOverride -equals SHINE-VS17-Latest
+    ${{ if eq(variables['System.CollectionUri'], 'https://dev.azure.com/ms/') }}:
+      name: SHINE-OSS-L
+    ${{ if ne(variables['System.CollectionUri'], 'https://dev.azure.com/ms/') }}:
+      name: SHINE-INT-L
+  steps:
+  - checkout: none
+
+  - task: PowerShell@2
+    displayName: Verify Build Request
+    inputs:
+      targetType: 'inline'
+      script: |
+        try {
+          # Try based on pull request first
+          $pullRequestNumber = "$(system.pullRequest.pullRequestNumber)";
+          $gitHubPullRequest = Invoke-RestMethod -Method Get "https://api.github.com/repos/microsoft/PowerToys/pulls/$pullRequestNumber/files"
+          # If there are no files updated in the commit that are .md, set skipBuild variable
+          if(([array]($gitHubPullRequest.filename) -notmatch ".md|.txt").Length -eq 0) {
+              Write-Host '##vso[task.setvariable variable=skipBuild;isOutput=true]Yes'
+              Write-Host 'Skipping Build'
+          }
+        }
+        catch {
+          # Fall back to the latest commit otherwise.
+          $commit = "$(build.sourceVersion)";
+          $gitHubCommit = Invoke-RestMethod -Method Get "https://api.github.com/repos/microsoft/PowerToys/commits/$commit"
+          if(([array]($githubCommit.files.filename) -notmatch ".md|.txt").Length -eq 0) {
+            Write-Host '##vso[task.setvariable variable=skipBuild;isOutput=true]Yes'
+            Write-Host 'Skipping Build'
+          }
+        }
+      pwsh: true
+    name: verifyBuildRequest

.pipelines/ci/templates/build-powertoys-steps.yml

@@ -7,6 +7,12 @@ steps:
   submodules: true
   clean: true
 
+- task: UseDotNet@2
+  displayName: 'Use .NET 6 SDK'
+  inputs:
+    packageType: sdk
+    version: '6.x'
+
 - task: PowerShell@2
   displayName: Verify XAML formatting
   inputs:
@@ -56,11 +62,18 @@ steps:
     arguments: -solution '$(build.sourcesdirectory)\installer\PowerToysSetup.sln'
     pwsh: true
 
+- task: PowerShell@2
+  displayName: Verify and set latest VCToolsVersion usage
+  inputs:
+    filePath: '$(build.sourcesdirectory)\.pipelines\verifyAndSetLatestVCToolsVersion.ps1'
+    pwsh: true
+
 - task: UseDotNet@2
-  displayName: 'Use .NET 7 SDK'
+  displayName: 'Use .NET 8 SDK'
   inputs:
     packageType: sdk
-    version: '7.x'
+    version: '8.x'
+    includePreviewVersions: true
 
 - task: VisualStudioTestPlatformInstaller@1
   displayName: Ensure VSTest Platform
@@ -195,8 +208,10 @@ steps:
       **\UnitTests-GcodeThumbnailProvider.dll
       **\UnitTests-StlThumbnailProvider.dll
       **\UnitTests-PdfThumbnailProvider.dll
+      **\UnitTests-QoiThumbnailProvider.dll
       **\Settings.UI.UnitTests.dll
       **\UnitTests-GcodePreviewHandler.dll
+      **\UnitTests-QoiPreviewHandler.dll
       **\UnitTests-FancyZonesEditor.dll
       **\UnitTests-PdfPreviewHandler.dll
       **\UnitTests-PreviewHandlerCommon.dll

.pipelines/release.yml

@@ -8,7 +8,7 @@ resources:
   - repository: 1ESPipelineTemplates
     type: git
     name: 1ESPipelineTemplates/1ESPipelineTemplates
-    ref: refs/tags/release
+    ref: refs/tags/release-2023-11-13-4
 
 parameters:
   - name: buildConfigurations
@@ -88,10 +88,16 @@ extends:
             version: '6.x'
 
         - task: UseDotNet@2
-          displayName: 'Use .NET 7 SDK'
+          displayName: 'Use .NET 8 SDK'
           inputs:
             packageType: sdk
-            version: '7.x'
+            version: '8.x'
+
+        - task: PowerShell@2
+          displayName: Verify and set latest VCToolsVersion usage
+          inputs:
+            filePath: '$(build.sourcesdirectory)\.pipelines\verifyAndSetLatestVCToolsVersion.ps1'
+            pwsh: true
 
         - task: NuGetAuthenticate@1
             

.pipelines/verifyAndSetLatestVCToolsVersion.ps1

@@ -0,0 +1,5 @@
+$LatestVCToolsVersion = (([xml](& 'C:\Program Files (x86)\Microsoft Visual Studio\Installer\vswhere.exe' -latest -requires Microsoft.VisualStudio.Component.VC.Tools.x86.x64 -include packages -format xml)).instances.instance.packages.package | ? { $_.id -eq "Microsoft.VisualCpp.Redist.14.Latest" -and $_.chip -eq "x64" }).version;
+
+Write-Output "Latest VCToolsVersion: $LatestVCToolsVersion"
+Write-Output "Updating VCToolsVersion environment variable for job"
+Write-Output "##vso[task.setvariable variable=VCToolsVersion]$LatestVCToolsVersion"

.pipelines/versionAndSignCheck.ps1

@@ -24,6 +24,7 @@ $versionExceptions = @(
 $nullVersionExceptions = @(
     "codicon.ttf",
     "e_sqlite3.dll",
+    "getfilesiginforedist.dll",
     "vcamp140_app.dll",
     "vcruntime140_app.dll",
     "vcruntime140_1_app.dll",

CONTRIBUTING.md

@@ -31,7 +31,7 @@ Upvote the original issue by clicking its [+😊] button and hitting 👍 (+1) i
 
 ## Contributing fixes / features
 
-Please comment on an issue to let us know you're interested in working on something before you start the work. Not only does this avoid multiple people unexpectedly working on the same thing at the same time but it enables us to make sure everyone is clear on what should be done to implement any new functionality. It's less work for everyone, in the long run, to establish this up front.
+Please comment on [our "Would you like to contribute to PowerToys?" thread](https://github.com/microsoft/PowerToys/issues/28769) to let us know you're interested in working on something before you start the work. Not only does this avoid multiple people unexpectedly working on the same thing at the same time but it enables us to make sure everyone is clear on what should be done to implement any new functionality. It's less work for everyone, in the long run, to establish this up front.
 
 ### Localization issues
 

Cpp.Build.props

@@ -63,6 +63,7 @@
       <!-- CLR + CFG are not compatible >:{ -->
       <ControlFlowGuard Condition="'$(CLRSupport)' == ''">Guard</ControlFlowGuard>
       <DebugInformationFormat Condition="'%(ControlFlowGuard)' == 'Guard'">ProgramDatabase</DebugInformationFormat>
+      <SDLCheck>true</SDLCheck>
     </ClCompile>
     <Link>
       <SubSystem>Windows</SubSystem>
@@ -77,7 +78,6 @@
     <ClCompile>
       <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <Optimization>Disabled</Optimization>
-      <SDLCheck>true</SDLCheck>
       <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
     </ClCompile>
     <Link>
@@ -88,7 +88,6 @@
     <ClCompile>
       <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
       <Optimization>MaxSpeed</Optimization>
-      <SDLCheck>false</SDLCheck>
       <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
       <FunctionLevelLinking>true</FunctionLevelLinking>
       <IntrinsicFunctions>true</IntrinsicFunctions>
@@ -113,6 +112,7 @@
     <PlatformToolset Condition="'$(OverridePlatformToolset)'!='True'">v143</PlatformToolset>
     <CharacterSet>Unicode</CharacterSet>
     <DesktopCompatible>true</DesktopCompatible>
+    <SpectreMitigation>Spectre</SpectreMitigation>
   </PropertyGroup>
 
   <!-- Debug/Release props -->

Directory.Build.props

@@ -1,9 +1,9 @@
 <Project>
 
   <PropertyGroup>
-    <Copyright>Copyright (C) 2023 Microsoft Corporation</Copyright>
+    <Copyright>Copyright (C) 2024 Microsoft Corporation</Copyright>
     <AssemblyCompany>Microsoft Corp.</AssemblyCompany>
-    <AssemblyCopyright>Copyright (C) 2023 Microsoft Corporation</AssemblyCopyright>
+    <AssemblyCopyright>Copyright (C) 2024 Microsoft Corporation</AssemblyCopyright>
     <AssemblyProduct>PowerToys</AssemblyProduct>
     <Company>Microsoft Corporation</Company>
     <NeutralLanguage>en-US</NeutralLanguage>
@@ -12,6 +12,7 @@
     <EnableNETAnalyzers>true</EnableNETAnalyzers>
     <AnalysisMode>Recommended</AnalysisMode>
     <_SkipUpgradeNetAnalyzersNuGetWarning>true</_SkipUpgradeNetAnalyzersNuGetWarning>
+    <IncludeSourceRevisionInInformationalVersion>false</IncludeSourceRevisionInInformationalVersion> <!-- Don't add source revision hash to the product version of binaries. -->
     <PlatformTarget>$(Platform)</PlatformTarget>
   </PropertyGroup>
 

Directory.Packages.props

@@ -18,33 +18,36 @@
     <PackageVersion Include="ControlzEx" Version="6.0.0" />
     <PackageVersion Include="coverlet.collector" Version="1.3.0" />
     <PackageVersion Include="DotNetSeleniumExtras.WaitHelpers" Version="3.11.0" />
-    <PackageVersion Include="HelixToolkit" Version="2.20.2" />
-    <PackageVersion Include="HelixToolkit.Core.Wpf" Version="2.20.2" />
+    <PackageVersion Include="HelixToolkit" Version="2.24.0" />
+    <PackageVersion Include="HelixToolkit.Core.Wpf" Version="2.24.0" />
     <PackageVersion Include="hyjiacan.pinyin4net" Version="4.1.1" />
     <PackageVersion Include="Interop.Microsoft.Office.Interop.OneNote" Version="1.1.0.2" />
     <PackageVersion Include="LazyCache" Version="2.4.0" />
     <PackageVersion Include="Mages" Version="2.0.1" />
     <PackageVersion Include="Markdig.Signed" Version="0.27.0" />
-    <PackageVersion Include="Microsoft.CodeAnalysis.NetAnalyzers" Version="7.0.3" />
-    <PackageVersion Include="Microsoft.Data.Sqlite" Version="7.0.0" />
+    <PackageVersion Include="Microsoft.CodeAnalysis.NetAnalyzers" Version="8.0.0" />
+    <PackageVersion Include="Microsoft.Data.Sqlite" Version="8.0.0" />
     <PackageVersion Include="Microsoft.DotNet.UpgradeAssistant.Extensions.Default.Analyzers" Version="0.4.336902" />
-    <PackageVersion Include="Microsoft.Extensions.DependencyInjection" Version="7.0.0" />
-    <PackageVersion Include="Microsoft.Extensions.Logging" Version="7.0.0" />
-    <PackageVersion Include="Microsoft.Extensions.Hosting" Version="7.0.1" />
-    <PackageVersion Include="Microsoft.Extensions.Hosting.WindowsServices" Version="7.0.0" />
+    <PackageVersion Include="Microsoft.Extensions.DependencyInjection" Version="8.0.0" />
+    <PackageVersion Include="Microsoft.Extensions.Logging" Version="8.0.0" />
+    <PackageVersion Include="Microsoft.Extensions.Logging.Abstractions" Version="8.0.0" />
+    <PackageVersion Include="Microsoft.Extensions.Hosting" Version="8.0.0" />
+    <PackageVersion Include="Microsoft.Extensions.Hosting.WindowsServices" Version="8.0.0" />
+    <PackageVersion Include="Microsoft.Extensions.ObjectPool" Version="5.0.17" />
     <PackageVersion Include="Microsoft.NET.Test.Sdk" Version="17.6.3" />
     <PackageVersion Include="Microsoft.Toolkit.Uwp.Notifications" Version="7.1.2" />
     <PackageVersion Include="Microsoft.Web.WebView2" Version="1.0.2088.41" />
-    <PackageVersion Include="Microsoft.Windows.Compatibility" Version="7.0.3" />
+    <PackageVersion Include="Microsoft.Windows.Compatibility" Version="8.0.0" />
     <PackageVersion Include="Microsoft.Windows.CsWin32" Version="0.2.46-beta" />
     <!-- CsWinRT version needs to be set to have a WinRT.Runtime.dll at the same version contained inside the NET SDK we're currently building on CI. -->
-    <PackageVersion Include="Microsoft.Windows.CsWinRT" Version="2.0.3" />
+    <PackageVersion Include="Microsoft.Windows.CsWinRT" Version="2.0.4" />
     <PackageVersion Include="Microsoft.Windows.SDK.BuildTools" Version="10.0.22621.756" />
     <PackageVersion Include="Microsoft.Windows.SDK.Contracts" Version="10.0.19041.1" />
-    <PackageVersion Include="Microsoft.WindowsAppSDK" Version="1.4.230913002" />
+    <PackageVersion Include="Microsoft.WindowsAppSDK" Version="1.4.231115000" />
     <PackageVersion Include="Microsoft.Xaml.Behaviors.WinUI.Managed" Version="2.0.9" />
     <PackageVersion Include="Microsoft.Xaml.Behaviors.Wpf" Version="1.1.39" />
     <PackageVersion Include="ModernWpfUI" Version="0.9.4" />
+    <!-- Moq to stay below v4.20 due to behavior change. need to be sure fixed -->
     <PackageVersion Include="Moq" Version="4.18.4" />
     <PackageVersion Include="MSTest.TestAdapter" Version="3.1.1" />
     <PackageVersion Include="MSTest.TestFramework" Version="3.1.1" />
@@ -57,22 +60,25 @@
     <PackageVersion Include="StreamJsonRpc" Version="2.14.24" />
     <PackageVersion Include="StyleCop.Analyzers" Version="1.2.0-beta.507" />
     <PackageVersion Include="System.CommandLine" Version="2.0.0-beta4.22272.1" />
-    <PackageVersion Include="System.ComponentModel.Composition" Version="7.0.0" />
-    <PackageVersion Include="System.Configuration.ConfigurationManager" Version="6.0.0" />
-    <PackageVersion Include="System.Data.OleDb" Version="7.0.0" />
-    <PackageVersion Include="System.Drawing.Common" Version="7.0.0" />
+    <PackageVersion Include="System.ComponentModel.Composition" Version="8.0.0" />
+    <PackageVersion Include="System.Configuration.ConfigurationManager" Version="8.0.0" />
+    <PackageVersion Include="System.Data.OleDb" Version="8.0.0" />
+    <PackageVersion Include="System.Drawing.Common" Version="8.0.0" />
     <PackageVersion Include="System.IO.Abstractions" Version="17.2.3" />
     <PackageVersion Include="System.IO.Abstractions.TestingHelpers" Version="17.2.3" />
-    <PackageVersion Include="System.Management" Version="7.0.2" />
+    <PackageVersion Include="System.Management" Version="8.0.0" />
+    <PackageVersion Include="System.Management.Automation" Version="7.4.0" />
     <PackageVersion Include="System.Reactive" Version="6.0.0-preview.9" />
-    <PackageVersion Include="System.Runtime.Caching" Version="7.0.0" />
-    <PackageVersion Include="System.ServiceProcess.ServiceController" Version="7.0.1" />
+    <PackageVersion Include="System.Runtime.Caching" Version="8.0.0" />
+    <PackageVersion Include="System.ServiceProcess.ServiceController" Version="8.0.0" />
+    <PackageVersion Include="System.Text.Encoding.CodePages" Version="8.0.0" />
     <PackageVersion Include="UnicodeInformation" Version="2.6.0" />
     <PackageVersion Include="UnitsNet" Version="4.145.0" />
+    <PackageVersion Include="UTF.Unknown" Version="2.5.1" />
     <PackageVersion Include="Vanara.PInvoke.User32" Version="3.4.11" />
     <PackageVersion Include="Vanara.PInvoke.Shell32" Version="3.4.11" />
     <PackageVersion Include="WinUIEx" Version="2.2.0" />
-    <PackageVersion Include="WPF-UI" Version="3.0.0-preview.4" />
+    <PackageVersion Include="WPF-UI" Version="3.0.0-preview.12" />
   </ItemGroup>
   <ItemGroup Condition="'$(IsExperimentationLive)'!=''">
     <!-- Additional dependencies used by experimentation -->

PowerToys.sln

@@ -538,7 +538,11 @@ Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "CropAndLock", "src\modules\
 EndProject
 Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "CropAndLockModuleInterface", "src\modules\CropAndLock\CropAndLockModuleInterface\CropAndLockModuleInterface.vcxproj", "{3157FA75-86CF-4EE2-8F62-C43F776493C6}"
 EndProject
-Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "UnitTests-FancyZonesEditor", "src\modules\fancyzones\UnitTests-FancyZonesEditor\UnitTests-FancyZonesEditor.csproj", "{FC8EB78F-F061-4BD9-A3F6-507BEA965E2B}"
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "CmdNotFound", "src\modules\cmdNotFound\CmdNotFound\CmdNotFound.csproj", "{A37865FE-2881-449F-8ADB-B8CD373D6D79}"
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "cmdNotFound", "cmdNotFound", "{4C0D0746-BE5B-49EE-BD5D-A7811628AE8B}"
+EndProject
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "UnitTests-FancyZonesEditor", "src\modules\fancyzones\UnitTests-FancyZonesEditor\UnitTests-FancyZonesEditor.csproj", "{FC8EB78F-F061-4BD9-A3F6-507BEA965E2B}"
 EndProject
 Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "EnvironmentVariables", "EnvironmentVariables", "{538ED0BB-B863-4B20-98CC-BCDF7FA0B68A}"
 EndProject
@@ -546,6 +550,20 @@ Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "EnvironmentVariables", "src
 EndProject
 Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "EnvironmentVariablesModuleInterface", "src\modules\EnvironmentVariables\EnvironmentVariablesModuleInterface\EnvironmentVariablesModuleInterface.vcxproj", "{B9420661-B0E4-4241-ABD4-4A27A1F64250}"
 EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "QoiThumbnailProviderCpp", "src\modules\previewpane\QoiThumbnailProviderCpp\QoiThumbnailProviderCpp.vcxproj", "{CCB5E44F-84D9-4203-83C6-1C9EC9302BC7}"
+EndProject
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "QoiThumbnailProvider", "src\modules\previewpane\QoiThumbnailProvider\QoiThumbnailProvider.csproj", "{D949EC7D-48A9-4279-95D5-078E7FD1F048}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "QoiPreviewHandlerCpp", "src\modules\previewpane\QoiPreviewHandlerCpp\QoiPreviewHandlerCpp.vcxproj", "{3BAF9C81-A194-4925-A035-5E24A5D1E542}"
+EndProject
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "QoiPreviewHandler", "src\modules\previewpane\QoiPreviewHandler\QoiPreviewHandler.csproj", "{6B04803D-B418-4833-A67E-B0FC966636A5}"
+EndProject
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "UnitTests-QoiPreviewHandler", "src\modules\previewpane\UnitTests-QoiPreviewHandler\UnitTests-QoiPreviewHandler.csproj", "{3940AD4D-F748-4BE4-9083-85769CD553EF}"
+EndProject
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "UnitTests-QoiThumbnailProvider", "src\modules\previewpane\UnitTests-QoiThumbnailProvider\UnitTests-QoiThumbnailProvider.csproj", "{F8FFFC12-A31A-4AFA-B3DF-14DCF42B5E38}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "CmdNotFoundModuleInterface", "src\modules\cmdNotFound\CmdNotFoundModuleInterface\CmdNotFoundModuleInterface.vcxproj", "{0014D652-901F-4456-8D65-06FC5F997FB0}"
+EndProject
 Global
 	GlobalSection(SolutionConfigurationPlatforms) = preSolution
 		Debug|ARM64 = Debug|ARM64
@@ -2316,6 +2334,18 @@ Global
 		{3157FA75-86CF-4EE2-8F62-C43F776493C6}.Release|x64.Build.0 = Release|x64
 		{3157FA75-86CF-4EE2-8F62-C43F776493C6}.Release|x86.ActiveCfg = Release|x64
 		{3157FA75-86CF-4EE2-8F62-C43F776493C6}.Release|x86.Build.0 = Release|x64
+		{A37865FE-2881-449F-8ADB-B8CD373D6D79}.Debug|ARM64.ActiveCfg = Debug|ARM64
+		{A37865FE-2881-449F-8ADB-B8CD373D6D79}.Debug|ARM64.Build.0 = Debug|ARM64
+		{A37865FE-2881-449F-8ADB-B8CD373D6D79}.Debug|x64.ActiveCfg = Debug|x64
+		{A37865FE-2881-449F-8ADB-B8CD373D6D79}.Debug|x64.Build.0 = Debug|x64
+		{A37865FE-2881-449F-8ADB-B8CD373D6D79}.Debug|x86.ActiveCfg = Debug|x64
+		{A37865FE-2881-449F-8ADB-B8CD373D6D79}.Debug|x86.Build.0 = Debug|x64
+		{A37865FE-2881-449F-8ADB-B8CD373D6D79}.Release|ARM64.ActiveCfg = Release|ARM64
+		{A37865FE-2881-449F-8ADB-B8CD373D6D79}.Release|ARM64.Build.0 = Release|ARM64
+		{A37865FE-2881-449F-8ADB-B8CD373D6D79}.Release|x64.ActiveCfg = Release|x64
+		{A37865FE-2881-449F-8ADB-B8CD373D6D79}.Release|x64.Build.0 = Release|x64
+		{A37865FE-2881-449F-8ADB-B8CD373D6D79}.Release|x86.ActiveCfg = Release|x64
+		{A37865FE-2881-449F-8ADB-B8CD373D6D79}.Release|x86.Build.0 = Release|x64
 		{FC8EB78F-F061-4BD9-A3F6-507BEA965E2B}.Debug|ARM64.ActiveCfg = Debug|ARM64
 		{FC8EB78F-F061-4BD9-A3F6-507BEA965E2B}.Debug|ARM64.Build.0 = Debug|ARM64
 		{FC8EB78F-F061-4BD9-A3F6-507BEA965E2B}.Debug|x64.ActiveCfg = Debug|x64
@@ -2352,6 +2382,90 @@ Global
 		{B9420661-B0E4-4241-ABD4-4A27A1F64250}.Release|x64.Build.0 = Release|x64
 		{B9420661-B0E4-4241-ABD4-4A27A1F64250}.Release|x86.ActiveCfg = Release|x64
 		{B9420661-B0E4-4241-ABD4-4A27A1F64250}.Release|x86.Build.0 = Release|x64
+		{CCB5E44F-84D9-4203-83C6-1C9EC9302BC7}.Debug|ARM64.ActiveCfg = Debug|ARM64
+		{CCB5E44F-84D9-4203-83C6-1C9EC9302BC7}.Debug|ARM64.Build.0 = Debug|ARM64
+		{CCB5E44F-84D9-4203-83C6-1C9EC9302BC7}.Debug|x64.ActiveCfg = Debug|x64
+		{CCB5E44F-84D9-4203-83C6-1C9EC9302BC7}.Debug|x64.Build.0 = Debug|x64
+		{CCB5E44F-84D9-4203-83C6-1C9EC9302BC7}.Debug|x86.ActiveCfg = Debug|x64
+		{CCB5E44F-84D9-4203-83C6-1C9EC9302BC7}.Debug|x86.Build.0 = Debug|x64
+		{CCB5E44F-84D9-4203-83C6-1C9EC9302BC7}.Release|ARM64.ActiveCfg = Release|ARM64
+		{CCB5E44F-84D9-4203-83C6-1C9EC9302BC7}.Release|ARM64.Build.0 = Release|ARM64
+		{CCB5E44F-84D9-4203-83C6-1C9EC9302BC7}.Release|x64.ActiveCfg = Release|x64
+		{CCB5E44F-84D9-4203-83C6-1C9EC9302BC7}.Release|x64.Build.0 = Release|x64
+		{CCB5E44F-84D9-4203-83C6-1C9EC9302BC7}.Release|x86.ActiveCfg = Release|x64
+		{CCB5E44F-84D9-4203-83C6-1C9EC9302BC7}.Release|x86.Build.0 = Release|x64
+		{D949EC7D-48A9-4279-95D5-078E7FD1F048}.Debug|ARM64.ActiveCfg = Debug|ARM64
+		{D949EC7D-48A9-4279-95D5-078E7FD1F048}.Debug|ARM64.Build.0 = Debug|ARM64
+		{D949EC7D-48A9-4279-95D5-078E7FD1F048}.Debug|x64.ActiveCfg = Debug|x64
+		{D949EC7D-48A9-4279-95D5-078E7FD1F048}.Debug|x64.Build.0 = Debug|x64
+		{D949EC7D-48A9-4279-95D5-078E7FD1F048}.Debug|x86.ActiveCfg = Debug|x64
+		{D949EC7D-48A9-4279-95D5-078E7FD1F048}.Debug|x86.Build.0 = Debug|x64
+		{D949EC7D-48A9-4279-95D5-078E7FD1F048}.Release|ARM64.ActiveCfg = Release|ARM64
+		{D949EC7D-48A9-4279-95D5-078E7FD1F048}.Release|ARM64.Build.0 = Release|ARM64
+		{D949EC7D-48A9-4279-95D5-078E7FD1F048}.Release|x64.ActiveCfg = Release|x64
+		{D949EC7D-48A9-4279-95D5-078E7FD1F048}.Release|x64.Build.0 = Release|x64
+		{D949EC7D-48A9-4279-95D5-078E7FD1F048}.Release|x86.ActiveCfg = Release|x64
+		{D949EC7D-48A9-4279-95D5-078E7FD1F048}.Release|x86.Build.0 = Release|x64
+		{3BAF9C81-A194-4925-A035-5E24A5D1E542}.Debug|ARM64.ActiveCfg = Debug|ARM64
+		{3BAF9C81-A194-4925-A035-5E24A5D1E542}.Debug|ARM64.Build.0 = Debug|ARM64
+		{3BAF9C81-A194-4925-A035-5E24A5D1E542}.Debug|x64.ActiveCfg = Debug|x64
+		{3BAF9C81-A194-4925-A035-5E24A5D1E542}.Debug|x64.Build.0 = Debug|x64
+		{3BAF9C81-A194-4925-A035-5E24A5D1E542}.Debug|x86.ActiveCfg = Debug|x64
+		{3BAF9C81-A194-4925-A035-5E24A5D1E542}.Debug|x86.Build.0 = Debug|x64
+		{3BAF9C81-A194-4925-A035-5E24A5D1E542}.Release|ARM64.ActiveCfg = Release|ARM64
+		{3BAF9C81-A194-4925-A035-5E24A5D1E542}.Release|ARM64.Build.0 = Release|ARM64
+		{3BAF9C81-A194-4925-A035-5E24A5D1E542}.Release|x64.ActiveCfg = Release|x64
+		{3BAF9C81-A194-4925-A035-5E24A5D1E542}.Release|x64.Build.0 = Release|x64
+		{3BAF9C81-A194-4925-A035-5E24A5D1E542}.Release|x86.ActiveCfg = Release|x64
+		{3BAF9C81-A194-4925-A035-5E24A5D1E542}.Release|x86.Build.0 = Release|x64
+		{6B04803D-B418-4833-A67E-B0FC966636A5}.Debug|ARM64.ActiveCfg = Debug|ARM64
+		{6B04803D-B418-4833-A67E-B0FC966636A5}.Debug|ARM64.Build.0 = Debug|ARM64
+		{6B04803D-B418-4833-A67E-B0FC966636A5}.Debug|x64.ActiveCfg = Debug|x64
+		{6B04803D-B418-4833-A67E-B0FC966636A5}.Debug|x64.Build.0 = Debug|x64
+		{6B04803D-B418-4833-A67E-B0FC966636A5}.Debug|x86.ActiveCfg = Debug|x64
+		{6B04803D-B418-4833-A67E-B0FC966636A5}.Debug|x86.Build.0 = Debug|x64
+		{6B04803D-B418-4833-A67E-B0FC966636A5}.Release|ARM64.ActiveCfg = Release|ARM64
+		{6B04803D-B418-4833-A67E-B0FC966636A5}.Release|ARM64.Build.0 = Release|ARM64
+		{6B04803D-B418-4833-A67E-B0FC966636A5}.Release|x64.ActiveCfg = Release|x64
+		{6B04803D-B418-4833-A67E-B0FC966636A5}.Release|x64.Build.0 = Release|x64
+		{6B04803D-B418-4833-A67E-B0FC966636A5}.Release|x86.ActiveCfg = Release|x64
+		{6B04803D-B418-4833-A67E-B0FC966636A5}.Release|x86.Build.0 = Release|x64
+		{3940AD4D-F748-4BE4-9083-85769CD553EF}.Debug|ARM64.ActiveCfg = Debug|ARM64
+		{3940AD4D-F748-4BE4-9083-85769CD553EF}.Debug|ARM64.Build.0 = Debug|ARM64
+		{3940AD4D-F748-4BE4-9083-85769CD553EF}.Debug|x64.ActiveCfg = Debug|x64
+		{3940AD4D-F748-4BE4-9083-85769CD553EF}.Debug|x64.Build.0 = Debug|x64
+		{3940AD4D-F748-4BE4-9083-85769CD553EF}.Debug|x86.ActiveCfg = Debug|x64
+		{3940AD4D-F748-4BE4-9083-85769CD553EF}.Debug|x86.Build.0 = Debug|x64
+		{3940AD4D-F748-4BE4-9083-85769CD553EF}.Release|ARM64.ActiveCfg = Release|ARM64
+		{3940AD4D-F748-4BE4-9083-85769CD553EF}.Release|ARM64.Build.0 = Release|ARM64
+		{3940AD4D-F748-4BE4-9083-85769CD553EF}.Release|x64.ActiveCfg = Release|x64
+		{3940AD4D-F748-4BE4-9083-85769CD553EF}.Release|x64.Build.0 = Release|x64
+		{3940AD4D-F748-4BE4-9083-85769CD553EF}.Release|x86.ActiveCfg = Release|x64
+		{3940AD4D-F748-4BE4-9083-85769CD553EF}.Release|x86.Build.0 = Release|x64
+		{F8FFFC12-A31A-4AFA-B3DF-14DCF42B5E38}.Debug|ARM64.ActiveCfg = Debug|ARM64
+		{F8FFFC12-A31A-4AFA-B3DF-14DCF42B5E38}.Debug|ARM64.Build.0 = Debug|ARM64
+		{F8FFFC12-A31A-4AFA-B3DF-14DCF42B5E38}.Debug|x64.ActiveCfg = Debug|x64
+		{F8FFFC12-A31A-4AFA-B3DF-14DCF42B5E38}.Debug|x64.Build.0 = Debug|x64
+		{F8FFFC12-A31A-4AFA-B3DF-14DCF42B5E38}.Debug|x86.ActiveCfg = Debug|x64
+		{F8FFFC12-A31A-4AFA-B3DF-14DCF42B5E38}.Debug|x86.Build.0 = Debug|x64
+		{F8FFFC12-A31A-4AFA-B3DF-14DCF42B5E38}.Release|ARM64.ActiveCfg = Release|ARM64
+		{F8FFFC12-A31A-4AFA-B3DF-14DCF42B5E38}.Release|ARM64.Build.0 = Release|ARM64
+		{F8FFFC12-A31A-4AFA-B3DF-14DCF42B5E38}.Release|x64.ActiveCfg = Release|x64
+		{F8FFFC12-A31A-4AFA-B3DF-14DCF42B5E38}.Release|x64.Build.0 = Release|x64
+		{F8FFFC12-A31A-4AFA-B3DF-14DCF42B5E38}.Release|x86.ActiveCfg = Release|x64
+		{F8FFFC12-A31A-4AFA-B3DF-14DCF42B5E38}.Release|x86.Build.0 = Release|x64
+		{0014D652-901F-4456-8D65-06FC5F997FB0}.Debug|ARM64.ActiveCfg = Debug|ARM64
+		{0014D652-901F-4456-8D65-06FC5F997FB0}.Debug|ARM64.Build.0 = Debug|ARM64
+		{0014D652-901F-4456-8D65-06FC5F997FB0}.Debug|x64.ActiveCfg = Debug|x64
+		{0014D652-901F-4456-8D65-06FC5F997FB0}.Debug|x64.Build.0 = Debug|x64
+		{0014D652-901F-4456-8D65-06FC5F997FB0}.Debug|x86.ActiveCfg = Debug|Win32
+		{0014D652-901F-4456-8D65-06FC5F997FB0}.Debug|x86.Build.0 = Debug|Win32
+		{0014D652-901F-4456-8D65-06FC5F997FB0}.Release|ARM64.ActiveCfg = Release|ARM64
+		{0014D652-901F-4456-8D65-06FC5F997FB0}.Release|ARM64.Build.0 = Release|ARM64
+		{0014D652-901F-4456-8D65-06FC5F997FB0}.Release|x64.ActiveCfg = Release|x64
+		{0014D652-901F-4456-8D65-06FC5F997FB0}.Release|x64.Build.0 = Release|x64
+		{0014D652-901F-4456-8D65-06FC5F997FB0}.Release|x86.ActiveCfg = Release|Win32
+		{0014D652-901F-4456-8D65-06FC5F997FB0}.Release|x86.Build.0 = Release|Win32
 	EndGlobalSection
 	GlobalSection(SolutionProperties) = preSolution
 		HideSolutionNode = FALSE
@@ -2546,10 +2660,19 @@ Global
 		{3B227528-4BA6-4CAF-B44A-A10C78A64849} = {4574FDD0-F61D-4376-98BF-E5A1262C11EC}
 		{F5E1146E-B7B3-4E11-85FD-270A500BD78C} = {3B227528-4BA6-4CAF-B44A-A10C78A64849}
 		{3157FA75-86CF-4EE2-8F62-C43F776493C6} = {3B227528-4BA6-4CAF-B44A-A10C78A64849}
+		{A37865FE-2881-449F-8ADB-B8CD373D6D79} = {4C0D0746-BE5B-49EE-BD5D-A7811628AE8B}
+		{4C0D0746-BE5B-49EE-BD5D-A7811628AE8B} = {4574FDD0-F61D-4376-98BF-E5A1262C11EC}
 		{FC8EB78F-F061-4BD9-A3F6-507BEA965E2B} = {D1D6BC88-09AE-4FB4-AD24-5DED46A791DD}
 		{538ED0BB-B863-4B20-98CC-BCDF7FA0B68A} = {4574FDD0-F61D-4376-98BF-E5A1262C11EC}
 		{51465DA1-C18B-4B99-93E1-ECF8E0FA0CBA} = {538ED0BB-B863-4B20-98CC-BCDF7FA0B68A}
 		{B9420661-B0E4-4241-ABD4-4A27A1F64250} = {538ED0BB-B863-4B20-98CC-BCDF7FA0B68A}
+		{CCB5E44F-84D9-4203-83C6-1C9EC9302BC7} = {2F305555-C296-497E-AC20-5FA1B237996A}
+		{D949EC7D-48A9-4279-95D5-078E7FD1F048} = {2F305555-C296-497E-AC20-5FA1B237996A}
+		{3BAF9C81-A194-4925-A035-5E24A5D1E542} = {2F305555-C296-497E-AC20-5FA1B237996A}
+		{6B04803D-B418-4833-A67E-B0FC966636A5} = {2F305555-C296-497E-AC20-5FA1B237996A}
+		{3940AD4D-F748-4BE4-9083-85769CD553EF} = {2F305555-C296-497E-AC20-5FA1B237996A}
+		{F8FFFC12-A31A-4AFA-B3DF-14DCF42B5E38} = {2F305555-C296-497E-AC20-5FA1B237996A}
+		{0014D652-901F-4456-8D65-06FC5F997FB0} = {4C0D0746-BE5B-49EE-BD5D-A7811628AE8B}
 	EndGlobalSection
 	GlobalSection(ExtensibilityGlobals) = postSolution
 		SolutionGuid = {C3A2F9D1-7930-4EF4-A6FC-7EE0A99821D0}

README.md

@@ -17,20 +17,21 @@ Microsoft PowerToys is a set of utilities for power users to tune and streamline
 
 |              | Current utilities: |              |
 |--------------|--------------------|--------------|
-| [Always on Top](https://aka.ms/PowerToysOverview_AoT) | [PowerToys Awake](https://aka.ms/PowerToysOverview_Awake) | [Color Picker](https://aka.ms/PowerToysOverview_ColorPicker) |
-| [Crop And Lock](https://aka.ms/PowerToysOverview_CropAndLock) | [Environment Variables](https://aka.ms/PowerToysOverview_EnvironmentVariables) | [FancyZones](https://aka.ms/PowerToysOverview_FancyZones) |
-| [File Explorer Add-ons](https://aka.ms/PowerToysOverview_FileExplorerAddOns) | [File Locksmith](https://aka.ms/PowerToysOverview_FileLocksmith) | [Hosts File Editor](https://aka.ms/PowerToysOverview_HostsFileEditor) |
-| [Image Resizer](https://aka.ms/PowerToysOverview_ImageResizer) | [Keyboard Manager](https://aka.ms/PowerToysOverview_KeyboardManager) | [Mouse utilities](https://aka.ms/PowerToysOverview_MouseUtilities) |
-| [Mouse Without Borders](https://aka.ms/PowerToysOverview_MouseWithoutBorders) | [Peek](https://aka.ms/PowerToysOverview_Peek) | [Paste as Plain Text](https://aka.ms/PowerToysOverview_PastePlain) |
-| [PowerRename](https://aka.ms/PowerToysOverview_PowerRename) | [PowerToys Run](https://aka.ms/PowerToysOverview_PowerToysRun) | [Quick Accent](https://aka.ms/PowerToysOverview_QuickAccent) |
-| [Registry Preview](https://aka.ms/PowerToysOverview_RegistryPreview) | [Screen Ruler](https://aka.ms/PowerToysOverview_ScreenRuler) | [Shortcut Guide](https://aka.ms/PowerToysOverview_ShortcutGuide) |
-| [Text Extractor](https://aka.ms/PowerToysOverview_TextExtractor) | [Video Conference Mute](https://aka.ms/PowerToysOverview_VideoConference) |
+| [Always on Top](https://aka.ms/PowerToysOverview_AoT) | [PowerToys Awake](https://aka.ms/PowerToysOverview_Awake) | [Command Not Found](https://aka.ms/PowerToysOverview_CmdNotFound) |
+| [Color Picker](https://aka.ms/PowerToysOverview_ColorPicker) | [Crop And Lock](https://aka.ms/PowerToysOverview_CropAndLock) | [Environment Variables](https://aka.ms/PowerToysOverview_EnvironmentVariables) |
+| [FancyZones](https://aka.ms/PowerToysOverview_FancyZones) | [File Explorer Add-ons](https://aka.ms/PowerToysOverview_FileExplorerAddOns) | [File Locksmith](https://aka.ms/PowerToysOverview_FileLocksmith) |
+| [Hosts File Editor](https://aka.ms/PowerToysOverview_HostsFileEditor) | [Image Resizer](https://aka.ms/PowerToysOverview_ImageResizer) | [Keyboard Manager](https://aka.ms/PowerToysOverview_KeyboardManager) |
+| [Mouse utilities](https://aka.ms/PowerToysOverview_MouseUtilities) | [Mouse Without Borders](https://aka.ms/PowerToysOverview_MouseWithoutBorders) | [Peek](https://aka.ms/PowerToysOverview_Peek) |
+| [Paste as Plain Text](https://aka.ms/PowerToysOverview_PastePlain) | [PowerRename](https://aka.ms/PowerToysOverview_PowerRename) | [PowerToys Run](https://aka.ms/PowerToysOverview_PowerToysRun) |
+| [Quick Accent](https://aka.ms/PowerToysOverview_QuickAccent) | [Registry Preview](https://aka.ms/PowerToysOverview_RegistryPreview) | [Screen Ruler](https://aka.ms/PowerToysOverview_ScreenRuler) |
+| [Shortcut Guide](https://aka.ms/PowerToysOverview_ShortcutGuide) | [Text Extractor](https://aka.ms/PowerToysOverview_TextExtractor) | [Video Conference Mute](https://aka.ms/PowerToysOverview_VideoConference) |
 
 ## Installing and running Microsoft PowerToys
 
 ### Requirements
 
 - Windows 11 or Windows 10 version 2004 (code name 20H1 / build number 19041) or newer.
+- x64 or ARM64 processor
 - Our installer will install the following items:
    - [Microsoft Edge WebView2 Runtime](https://go.microsoft.com/fwlink/p/?LinkId=2124703) bootstrapper. This will install the latest version.
 
@@ -39,19 +40,19 @@ Microsoft PowerToys is a set of utilities for power users to tune and streamline
 Go to the [Microsoft PowerToys GitHub releases page][github-release-link] and click on `Assets` at the bottom to show the files available in the release. Please use the appropriate PowerToys installer that matches your machine's architecture and install scope. For most, it is `x64` and per-user.
 
 <!-- items that need to be updated release to release -->
-[github-next-release-work]: https://github.com/microsoft/PowerToys/issues?q=project%3Amicrosoft%2FPowerToys%2F49
-[github-current-release-work]: https://github.com/microsoft/PowerToys/issues?q=project%3Amicrosoft%2FPowerToys%2F48
-[ptUserX64]: https://github.com/microsoft/PowerToys/releases/download/v0.75.1/PowerToysUserSetup-0.75.1-x64.exe
-[ptUserArm64]: https://github.com/microsoft/PowerToys/releases/download/v0.75.1/PowerToysUserSetup-0.75.1-arm64.exe
-[ptMachineX64]: https://github.com/microsoft/PowerToys/releases/download/v0.75.1/PowerToysSetup-0.75.1-x64.exe
-[ptMachineArm64]: https://github.com/microsoft/PowerToys/releases/download/v0.75.1/PowerToysSetup-0.75.1-arm64.exe
-
+[github-next-release-work]: https://github.com/microsoft/PowerToys/issues?q=project%3Amicrosoft%2FPowerToys%2F50
+[github-current-release-work]: https://github.com/microsoft/PowerToys/issues?q=project%3Amicrosoft%2FPowerToys%2F49
+[ptUserX64]: https://github.com/microsoft/PowerToys/releases/download/v0.76.2/PowerToysUserSetup-0.76.2-x64.exe
+[ptUserArm64]: https://github.com/microsoft/PowerToys/releases/download/v0.76.2/PowerToysUserSetup-0.76.2-arm64.exe
+[ptMachineX64]: https://github.com/microsoft/PowerToys/releases/download/v0.76.2/PowerToysSetup-0.76.2-x64.exe
+[ptMachineArm64]: https://github.com/microsoft/PowerToys/releases/download/v0.76.2/PowerToysSetup-0.76.2-arm64.exe
+ 
 |  Description   | Filename | sha256 hash |
 |----------------|----------|-------------|
-| Per user - x64       | [PowerToysUserSetup-0.75.1-x64.exe][ptUserX64] | CFDAE52607689A695F4E4DDD7C1FE68400359AEF0D2B23C86122835E9D32A20F |
-| Per user - ARM64     | [PowerToysUserSetup-0.75.1-arm64.exe][ptUserArm64] | 9BAD3EF71DEDE70445416AC7369D115FAE095152722BC4F23EE393D8A10F45CA |
-| Machine wide - x64   | [PowerToysSetup-0.75.1-x64.exe][ptMachineX64] | 18FEB9377B0BA45189FFF4F89627B152DD794CCC15F005592B34A40A3EA62EA8 |
-| Machine wide - ARM64 | [PowerToysSetup-0.75.1-arm64.exe][ptMachineArm64] | F5CDF5A35876A0B581F446BF728B7AC52B6B701C0850D9CEA9A1874523745CFD |
+| Per user - x64       | [PowerToysUserSetup-0.76.2-x64.exe][ptUserX64] | 73D734FC34B3F9D7484081EC0F0B6ACD4789A55203A185904CC5C62ABD02AF16 |
+| Per user - ARM64     | [PowerToysUserSetup-0.76.2-arm64.exe][ptUserArm64] | 5284CC5DA399DC37858A2FD260C30F20C484BA1B5616D0EB67CD90A8A286CB8B |
+| Machine wide - x64   | [PowerToysSetup-0.76.2-x64.exe][ptMachineX64] | 72B87381C9E5C7447FB59D7CE478B3102C9CEE3C6EB3A6BC7EC7EC7D9EFAB2A0 |
+| Machine wide - ARM64 | [PowerToysSetup-0.76.2-arm64.exe][ptMachineArm64] | F28C7DA377C25309775AB052B2B19A299C26C41582D05B95C3492A4A8C952BFE |
 
 This is our preferred method.
 
@@ -97,142 +98,158 @@ For guidance on developing for PowerToys, please read the [developer docs](/doc/
 
 Our [prioritized roadmap][roadmap] of features and utilities that the core team is focusing on.
 
-### 0.75 - October 2023 Update
+### 0.76 - November 2023 Update
 
 In this release, we focused on new features, stability and improvements.
 
 **Highlights**
 
- - New utility: An environment variables editor with the functionality to configure profiles that can be enabled/disabled. Thanks [@niels9001](https://github.com/niels9001) for the design and UI work that made this possible!
- - Settings has a new Dashboard home page, with quick access for enabling modules, short descriptions and activation methods. Thanks [@niels9001](https://github.com/niels9001) for the design and UI work that made this possible!
- - Added a previewer to Peek that hosts File Explorer previewers to support every file type that a machine is currently able to preview. For example, this means that if Microsoft Office handlers are installed, Peek can preview Office files. Thanks [@dillydylann](https://github.com/dillydylann)!
+ - Upgrade to .NET 8. Thanks [@snickler](https://github.com/snickler)!
+ - Keyboard Manager can now remap keys and shortcuts to send sequences of unicode text.
+ - Modernized the Keyboard Manager Editor UI. Thanks [@dillydylann](https://github.com/dillydylann)!
+ - Modernized the PowerToys Run, Quick Accent and Text Extractor UIs. Thanks [@niels9001](https://github.com/niels9001)!
+ - New File Explorer Add-ons: QOI image Preview Handler and Thumbnail Provider. Thanks [@pedrolamas](https://github.com/pedrolamas)!
 
 ### General
+ - Updated the WebView 2 dependency to 1.0.2088.41. Thanks [@davidegiacometti](https://github.com/davidegiacometti)!
+ - Fixed unreadable color brushes used across WinUI3 applications for improved accessibility. Thanks [@niels9001](https://github.com/niels9001)!
+ - Flyouts used across WinUI3 applications are no longer constrained to the application's bounds. Thanks [@Jay-o-Way](https://github.com/Jay-o-Way)!
+ - Upgraded the WPF-UI dependency to preview.9 and then preview.11. Thanks [@niels9001](https://github.com/niels9001) and [@pomianowski](https://github.com/pomianowski)!
+ - Upgraded to .NET 8. Thanks [@snickler](https://github.com/snickler)!
+ - Updated the WinAppSDK dependency to 1.4.3.
 
- - Many typo fixes through the projects and documentation. Thanks [@brianteeman](https://github.com/brianteeman)!
- - Refactored and improved the logic across utilities for bringing a window to the foreground after activation.
+### Awake
 
-### Color Picker
+ - Added localization to the tray icon context menu.
 
- - After activating Color Picker, it's now possible to cancel the session by clicking the right mouse button. Thanks [@fredso90](https://github.com/fredso90)!
+### Crop And Lock
+
+ - Fixed restoring windows that were reparented while maximized.
 
 ### Environment Variables
- - Added a new utility: An environment variables editor that has the functionality to configure profiles that can be enabled/disabled. Thanks [@niels9001](https://github.com/niels9001) for the design and UI work that made this possible!
- - Shows in the title bar if it's running as an administrator. Thanks [@davidegiacometti](https://github.com/davidegiacometti)!
+
+ - Fixed crash caused by WinAppSDK version bump by replacing ListView elements with ItemsControl.
 
 ### FancyZones
 
- - Fixed an issue causing context menu pop-ups from some apps to automatically snap to a zone. (This was a hotfix for 0.74)
- - Applied the fix for the context menu pop-ups to the logic that decides which windows can be snapped.
- - Reworked the "Keep windows in their zones" option to include the work area and turn it on by default, fixing an incompatibility with the Copilot flyout.
- - Fixed an issue causing windows to be snapped while moving to a different virtual desktop.
+ - Reverted a change that caused some applications, like the Windows Calculator, to not snap correctly. (This was a hotfix for 0.75)
+ - FancyZones Editor will no longer apply a layout to the current monitor after editing it.
+ - Fixed and refactored the code that detected if a window can be snapped. Added tests to it with known application window styles to avoid regressions in the future.
 
 ### File Explorer add-ons
 
- - Fixed an issue blocking some SVG files from being previewed correctly. (This was a hotfix for 0.74)
- - Fixed crashes on invalid files in the STL Thumbnail generator.
+ - Solved an issue incorrectly detecting encoding when previewing code files preview.
+ - Fixed the background color for Gcode preview handler on dark theme. Thanks [@pedrolamas](https://github.com/pedrolamas)!
+ - New utilities: Preview Handler and Thumbnail Provider for QOI image files. Thanks [@pedrolamas](https://github.com/pedrolamas)!
+ - GCode Thumbnails are now in the 32 bit ARGB format. Thanks [@pedrolamas](https://github.com/pedrolamas)!
+ - Added the perceived type to SVG and QOI file thumbnails. Thanks [@pedrolamas](https://github.com/pedrolamas)!
 
 ### GPO
 
- - Added a global GPO rule that applies for all utilities unless it's overridden. Thanks [@htcfreek](https://github.com/htcfreek)!
- - Added GPO rules to control which PowerToys Run plugins should be enabled/disabled by policy. Thanks [@htcfreek](https://github.com/htcfreek)!
-   * All plugins have to provide its plugin ID as static property in its Main method.
+ - Added the missing Environment Variables utility policy to the .admx and .adml files. (This was a hotfix for 0.75)
+ - Fixed some typos and text improvements in the .adml file. Thanks [@htcfreek](https://github.com/htcfreek)!
+
+### Hosts File Editor
+
+ - Added a proper warning when the hosts file is read-only and a button to make it writable. Thanks [@davidegiacometti](https://github.com/davidegiacometti)!
 
 ### Image Resizer
+ 
+ - Fixed a WPF-UI issue regarding the application's background brushes. Thanks [@niels9001](https://github.com/niels9001)!
 
- - Fixed wrong .bmp file association in the registry. Thanks [@meitinger](https://github.com/meitinger)!
+### Installer
+
+ - Included the Text Extractor and Awake localization files in the install process.
 
 ### Keyboard Manager
 
- - Visually distinguish between the Numpad and regular period characters in the UI.
- - This utility is now disabled by default on new installations, since it requires user configuration to affect keyboard behavior.
- - Fixed a typo in the Numpad Subtract key in the editor.
+ - Modernized the UI with the Fluent design. Thanks [@dillydylann](https://github.com/dillydylann)!
+ - Added the feature to remap keys and shortcuts to arbitrary unicode text sequences.
 
-### Mouse Highlighter
+### Mouse Without Borders
 
- - Removed the lower limit of fade delay and duration, to allow better signaling of doing a double click. Thanks [@fredso90](https://github.com/fredso90)!
-
-### Mouse Jump
-
- - The process now runs in the background, for a faster activation time. Thanks [@mikeclayton](https://github.com/mikeclayton)!
+ - Removed Thread.Suspend calls when exiting the utility. That call is deprecated, unneeded and was causing a silent crash.
 
 ### Peek
 
- - Reported file sizes will now more closely match what's reported by File Explorer. Thanks [@Deepak-Sangle](https://github.com/Deepak-Sangle)!
- - Added a previewer that hosts File Explorer previewers to support every file type that a machine is currently able to preview. Thanks [@dillydylann](https://github.com/dillydylann)!
- - Fixed an issue causing the preview of the first file to be stuck loading. Thanks [@davidegiacometti](https://github.com/davidegiacometti)!
- - Fixed showing the previously previewed video file when invoking Peek with a new file. Thanks [@davidegiacometti](https://github.com/davidegiacometti)!
- - Added the wrap and file formatting options to the Monaco previewer. Thanks [@davidegiacometti](https://github.com/davidegiacometti)!
-
-### PowerRename
-
- - Save data from the last run in a different file to avoid conflicting with changing settings in the Settings application.
+ - Added the possibility to pause/resume videos with the space bar. Thanks [@davidegiacometti](https://github.com/davidegiacometti)!
+ - Fixed high CPU usage when idle before initializing the main window. Thanks [@davidegiacometti](https://github.com/davidegiacometti)!
+ - Implemented Ctrl+W as a shortcut to close Peek. Thanks [@Physalis2](https://github.com/Physalis2)!
+ - Solved an issue incorrectly detecting encoding when previewing code files.
+ - Fixed background issues when peeking into HTML files after the WebView 2 upgrade.
 
 ### PowerToys Run
 
- - Fixed a case where the query wasn't being cleared after invoking a result action through the keyboard. Thanks [@davidegiacometti](https://github.com/davidegiacometti)!
- - Improved the shell selection option for Windows Terminal in the Shell plugin and improved the backend code for adding combo box options to plugins. Thanks [@htcfreek](https://github.com/htcfreek)!
-   * The implementation of the combo box items has changed and isn't backward compatible. (Old plugins won't crash, but the combo box setting isn't shown in settings ui anymore.)
- - Added Unix time in milliseconds, fixed negative unix time input and improved error messages in the TimeDate plugin. Thanks [@htcfreek](https://github.com/htcfreek)!
- - The PowerToys plugin allows calling the new Environment Variables utility. Thanks [@davidegiacometti](https://github.com/davidegiacometti)!
- - Refactored and added support to VSCodium Stable, VSCodium Insider and Remote Tunnels workspaces. Thanks [@eternalphane](https://github.com/eternalphane)!
+ - Moved to WPF-UI and redesigned according to Fluent UX principles. Thanks [@niels9001](https://github.com/niels9001)!
+ - Fixed an issue causing 3rd party plugins to not have their custom settings correctly initialized with default values. (This was a hotfix for 0.75) Thanks [@waaverecords](https://github.com/waaverecords)!
+ - Fixed a crash in the VSCode plugin when the VSCode path had trailing backspaces. Thanks [@davidegiacometti](https://github.com/davidegiacometti)!
+ - Fixed a crash when trying to load invalid image icons.
+ - Fixed a crash in the Programs plugin when getting images for some .lnk files.
+ - Fixed a rare startup initialization error and removed cold start operations that were no longer needed. Thanks [@davidegiacometti](https://github.com/davidegiacometti)!
+ - Improved calculations for Windows File Time and Unix Epoch Time in the DateTime plugin. Thanks [@htcfreek](https://github.com/htcfreek)!
+ - Fixed a crash when trying to get the icon for a link that pointed to no file.
+ - Cleaned up code in the WindowWalker plugin improving the logic. Thanks [@davidegiacometti](https://github.com/davidegiacometti)!
 
 ### Quick Accent
 
- - Fixed characters that were removed from "All languages" because they were not in any single language. (This was a hotfix for 0.74)
- - Added Asturian characters to the Spanish character set. Thanks [@blakestack](https://github.com/blakestack)!
- - Added Greek characters with tonos. Thanks [@PesBandi](https://github.com/PesBandi)! 
-
-### Registry Preview
-
- - Fixed a parsing error that crashed the Application. (This was a hotfix for 0.74)
- - Fixed opening file names with non-ASCII characters. Thanks [@randyrants](https://github.com/randyrants)!
- - Fixed wrong parsing when the file contained an assignment with spaces around the equals sign. Thanks [@randyrants](https://github.com/randyrants)!
- - Fixed key transversal issues when a key was a substring of a parent key. Thanks [@randyrants](https://github.com/randyrants)!
-
-### Runner
-
- - Fixed the update notification toast to show a Unicode arrow. Thanks [@TheJoeFin](https://github.com/TheJoeFin)!
+ - Moved from ModernWPF to WPF-UI. Thanks [@niels9001](https://github.com/niels9001)!
+ - Added support to the Finnish language character set. Thanks [@davidtlascelles](https://github.com/davidtlascelles)!
+ - Added currency symbols for Croatian, Gaeilge, Gàidhlig and Welsh. Thanks [@PesBandi](https://github.com/PesBandi)!
+ - Added a missing Latin letter ꝡ. Thanks [@cubedhuang](https://github.com/cubedhuang)!
+ - Added fraction characters. Thanks [@PesBandi](https://github.com/PesBandi)!
+ - Added support to the Danish language character set. Thanks [@PesBandi](https://github.com/PesBandi)!
+ - Added the Kazakhstani Tenge character to the Currencies characters set. Thanks [@PesBandi](https://github.com/PesBandi)!
+ - Renamed Slovakian to Slovak, which is the correct term. Thanks [@PesBandi](https://github.com/PesBandi)!
+ - Added the Greek language character set. Thanks [@mcbabo](https://github.com/mcbabo)!
 
 ### Settings
 
- - Added a new Dashboard home page, with quick access for enabling modules, short descriptions and activation methods. Thanks [@niels9001](https://github.com/niels9001) for the design and UI work that made this possible!
- - Fixed a typo in the Hosts File Editor page. Thanks [@Deepak-Sangle](https://github.com/Deepak-Sangle)!
- - Added a lock icon to the flyout listing of all modules when its enabled state is controlled by policy.
- - The "All apps" list in the flyout will now list all apps even if their enabled state is controlled by policy.
+ - When clicking a module's name on the Dashboard, it will navigate to that module's page.
+ - Fixed the clipping of information in the Backup and Restore section of the General Settings page. Thanks [@niels9001](https://github.com/niels9001)!
+ - Updated the File Explorer Add-ons fluent icon. Thanks [@niels9001](https://github.com/niels9001)!
+ - Added a warning when trying to set a shortcut that might conflict with "Alt Gr" key combinations.
+ - Added a direct link to the OOBE's "What's New page" from the main Settings window. Thanks [@iakrayna](https://github.com/iakrayna)!
+ - Changed mentions from Microsoft Docs to Microsoft Learn.
+ - Fixed the slow reaction to system theme changes.
 
-### Video Conference Mute
+### Text Extractor
 
- - Added an option to allow for the toolbar to hide after some time passed. Thanks [@quyenvsp](https://github.com/quyenvsp)!
- - Added an option to select to mute or unmute at startup. Thanks [@quyenvsp](https://github.com/quyenvsp)!
- - Fixed an issue causing a cascade of mute/unmute triggers.
+ - Move to WPF-UI, localization and light theme support. Thanks [@niels9001](https://github.com/niels9001)!
+ - Disabled by default on Windows 11, with a information box on Settings to prefer using the Windows Snipping Tool, which now supports OCR.
 
 ### Documentation
 
- - Updated the Group Policy documentation on learn.microsoft.com, removed the Group Policy documentation from the repository and linked to the published documentation on learn.microsoft.com instead.
+ - Fixed some typos in the README. Thanks [@Asymtode712](https://github.com/Asymtode712)!
+ - Reworked the gpo docs on learn.microsoft.com, adding .admx, registry and Intune information. Thanks [@htcfreek](https://github.com/htcfreek)!
 
 ### Development
 
- - Added project dependencies to the version project and headers to avoid building errors. Thanks [@johnterickson](https://github.com/johnterickson)!
- - Enabled Control Flow Guard in the C++ projects. Thanks [@DHowett](https://github.com/DHowett)!
- - Switched the release pipeline to the 1ES governed template. Thanks [@DHowett](https://github.com/DHowett)!
- - Styled XAML files and added a XAML Style checker to the solution, with a CI action to check if code being contributed is compliant. Thanks [@davidegiacometti](https://github.com/davidegiacometti)!
- - Suppressed redundant midl file warnings in PowerRename.
- - Add unit tests to FancyZones Editor. Thanks [@garv5014](https://github.com/garv5014), [@andrewbengordon](https://github.com/andrewbengordon) and [@Cwighty](https://github.com/Cwighty)!
- - Improved the Default Layouts internal structure in FancyZones Editor. Thanks [@garv5014](https://github.com/garv5014)!
- - Fixed code issues to allow building in Visual Studio 17.8 Preview 4.
+ - Updated the check-spelling ci action to 0.22. Thanks [@jsoref](https://github.com/jsoref)!
+ - Refactored the modules data model used between the Settings Dashboard and Flyout.
+ - Fixed a flaky interop test that was causing automated CI to hang occasionally.
+ - Increased the WebView 2 loading timeout to reduce flakiness in those tests. Thanks [@davidegiacometti](https://github.com/davidegiacometti)!
+ - Added support for building with the Dev Drive CopyOnWrite feature, increasing build speed. Thanks [@pedrolamas](https://github.com/pedrolamas)!
+ - Addressed the C# static analyzers suggestions. Thanks [@davidegiacometti](https://github.com/davidegiacometti)!
+ - Addressed the C++ static analyzers suggestions.
+ - PRs that only contain Markdown or text files changes no longer trigger the full CI. Thanks [@snickler](https://github.com/snickler)!
+ - Updated the Microsoft.Windows.CsWinRT to 2.0.4 to fix building with the official Visual Studio 17.8 release.
+ - Fixed new code quality issues caught by the official Visual Studio 17.8 release.
+ - Added a bot trigger to point contributors to the main new contribution issue on GitHub. Thanks [@Aaron-Junker](https://github.com/Aaron-Junker)!
+ - Removed unneeded entries from expect.txt.
+ - Turned off a new feature from Visual Studio that was adding the commit hash to the binary files Product Version.
+ - Refactored and reviewed the spellcheck entries into different files. Thanks [@Jay-o-Way](https://github.com/Jay-o-Way)!
+ - Added Spectre mitigation and SHA256 hash creation for some DLLs.
+ - Reverted the release pipeline template to a previous release that's stable for shipping PowerToys.
 
-#### What is being planned for version 0.76
+#### What is being planned for version 0.77
 
-For [v0.76][github-next-release-work], we'll work on the items below:
+For [v0.77][github-next-release-work], we'll work on the items below:
 
+ - New utility: Command Not Found
  - Language selection
- - .NET 8 upgrade
- - Allowing Keyboard Manager to output arbitrary Unicode sequences
  - Automated UI testing through WinAppDriver
- - Modernize and refresh the UX of PowerToys based on WPF. Here's Work in Progress previews for the modules "PowerToys Run" and "Color Picker":
-
-![PowerToys Run UI refresh WIP](https://github.com/microsoft/PowerToys/assets/9866362/16903bcb-c18e-49fb-93ca-738b81957055)
+ - Develop support for Desired State Configuration
+ - Modernize and refresh the UX of PowerToys based on WPF. Here's the Work in Progress preview for "Color Picker":
 
 ![ColorPicker UI refresh WIP](https://github.com/microsoft/PowerToys/assets/9866362/ceebe54b-de63-4ce7-afcb-2cd4280bf4d1)
 

doc/devdocs/common/FilePreviewCommon.md

@@ -0,0 +1,75 @@
+# [FilePreviewCommon](/src/common/FilePreviewCommon)
+
+This project contains common code used for previewing and displaying files.
+
+## Monaco preview
+
+Monaco preview enables to display developer files. It is based on [Microsoft's Monaco Editor](https://microsoft.github.io/monaco-editor/) which is maintained by the Visual Studio Code team.
+
+This previewer is used for the File Explorer Dev File Previewer, as well as PowerToys Peek.
+
+### Update Monaco Editor
+
+1. Download Monaco editor with [npm](https://www.npmjs.com/): Run `npm i monaco-editor` in the command prompt.
+2. Delete everything except the `min` folder (the minimised code) from the downloaded files.
+3. Copy the `min` folder into the `src/common/FilePreviewCommon/Assets/Monaco/monacoSRC` folder of the PowerToys project.
+4. Generate the JSON file as described in the generate [monaco_languages.json file](#monaco_languagesjson) section.
+
+### Add a new language definition
+
+As an example on how to add a new language definition you can look at the one for [registry files](/src/common/FilePreviewCommon/Assets/Monaco/customLanguages/reg.js).
+
+1. Add the new language definition (written with [Monarch](https://microsoft.github.io/monaco-editor/monarch.html)) as a new file to the [folder containing Monaco custom languages](/src/common/FilePreviewCommon/Assets/Monaco/customLanguages/) (Remember the file name and the string you used for "idDefinition" as you need it later.). The file should be formatted like in the example below. (Please change `idDefinition` to the name of your language.)
+
+```javascript
+export function idDefinition() {
+    return {
+        ...
+    }
+}
+```
+
+2. Add the following line to the [`monacoSpecialLanguages.js`](/src/common/FilePreviewCommon/Assets/Monaco/monacoSpecialLanguages.js) file, after the other import statements:
+
+```javascript
+import { idDefinition } from './customLanguages/file.js';
+```
+
+> Replace file.js with the name of your definition file from step 1. Please replace idDefinition with the string you used in step 1.
+
+3. In the [`monacoSpecialLanguages.js`](/src/common/FilePreviewCommon/Assets/Monaco/monacoSpecialLanguages.js) file add the following line into the `registerAdditionalLanguages` function:
+
+```javascript
+registerAdditionalNewLanguage("id", [".fileExtension"], idDefinition(), monaco)
+```
+
+> Replace id and idDefinition with your id and string used in step 1. Replace fileExtension with a set of file extensions you want the language to register to.
+
+  * The id can be anything. Recommended is one of the file extensions. For example "php" or "reg".
+
+4. Execute the steps described in the [monaco_languages.json](#monaco_languagesjson) section.
+
+### Add a new file extension to an existing language
+
+1. In the [`monacoSpecialLanguages.js`](/src/common/FilePreviewCommon/Assets/Monaco/monacoSpecialLanguages.js) file add the following line to the `registerAdditionalLanguages` function. (`existingId` is the id of the language you want to add the extension to. You can find these id's in the [`monaco_languages.json`](/src/common/FilePreviewCommon/Assets/Monaco/monaco_languages.json) file):
+
+```javascript
+registerAdditionalLanguage("id", [".fileExtension"], "existingId", monaco)
+```
+
+  * If for instance you want to add more extensions to the php language set the id to `phpExt` and the existingId to `php`.
+
+2. Copy the existing language definition into the `languageDefinitions` function in the same file. You can find the existing definitions in the following folder: [`/src/common/FilePreviewCommon/Assets/Monaco/monacoSRC/min/vs/basic-languages/`](/src/common/FilePreviewCommon/Assets/Monaco/monacoSRC/min/vs/basic-languages/).
+
+3. Execute the steps described in the [monaco_languages.json](#monaco_languagesjson) section.
+
+### monaco_languages.json
+
+[`monaco_languages.json`](/src/common/FilePreviewCommon/Assets/Monaco/monaco_languages.json) contains all extensions and IDs for the languages supported by Monaco. The [`MonacoHelper`](/src/common/FilePreviewCommon/MonacoHelper.cs) class and the installer are using this file to register preview handlers for the defined extensions.
+
+After updating Monaco Editor and/or adding a new language you should update the [`monaco_languages.json`](/src/common/FilePreviewCommon/Assets/Monaco/monaco_languages.json) file.
+
+1. Run the [`generateLanguagesJson.html`](/src/common/FilePreviewCommon/Assets/Monaco/generateLanguagesJson.html) file on a local webserver (as webbrowsers will block certain needed features when running the file locally.)
+  *  This can for example be achieved by using the [Preview Server](https://marketplace.visualstudio.com/items?itemName=yuichinukiyama.vscode-preview-server) extension for Visual Studio Code: Open the file in Visual Studio Code, right click in the code editor and select `vscode-preview-server: Launch on browser`. The file will be opened in a browser.
+2. The browser will download the new `monaco_languages.json` file
+3. Replace the old file with the newly downloaded one in the source code folder.

doc/devdocs/common/common.md

@@ -1,5 +1,7 @@
 # Classes and structures
 
+> This document is outdated and will soon be renewed.
+
 #### class Animation: [header](/src/common/animation.h) [source](/src/common/animation.cpp)
 Animation helper class with two easing-in animations: linear and exponential.
 

doc/devdocs/common/readme.md

@@ -0,0 +1,7 @@
+# Common
+
+The [common](/src/common) folder contains projects with code, that is used in multiple projects.
+
+## [FilePreviewCommon](FilePreviewCommon.md)
+
+This project contains common code for file previewing.

doc/devdocs/modules/launcher/new-plugin-checklist.md

@@ -3,6 +3,7 @@
 - [ ] Microsoft plugin project name pattern: `Microsoft.PowerToys.Run.Plugin.{PluginName}`
 - [ ] Community plugin project name pattern: `Community.PowerToys.Run.Plugin.{PluginName}`
 - [ ] The project file should import `Version.props` and specify `<Version>$(Version).0</Version>`
+- [ ] If the plugin uses any 3rd party dependencies the project file should import `DynamicPlugin.props`
 - [ ] Make sure `*.csproj` specify only x64 platform target
 - [ ] The plugin has to contain a `plugin.json` file of the following format in its root folder
 ```
@@ -17,7 +18,8 @@
   "Website": "https://aka.ms/powertoys",
   "ExecuteFileName": string, // Should be {Type}.PowerToys.Run.Plugin.{PluginName}.dll
   "IcoPathDark": string, // Path to dark theme icon. The path is relative to the root plugin folder 
-  "IcoPathLight": string // Path to light theme icon. The path is relative to the root plugin folder 
+  "IcoPathLight": string // Path to light theme icon. The path is relative to the root plugin folder
+  "DynamicLoading": bool // Sets whether the plugin should dynamically load any dependencies isolated from the core application.  
 }
 ```
 - [ ] Make sure your `Main` class contains a public, static string property for the `PluginID`. The plugin id has to be the same as the one in the `plugin.json`file.

doc/devdocs/modules/launcher/plugins/community.valuegenerator.md

@@ -1,6 +1,6 @@
 # Value Generator Plugin
 
-The Value Generator plugin is used to generate hashes for strings, to calculate base64 encodings and to generate GUIDs versions 1, 3, 4 and 5.
+The Value Generator plugin is used to generate hashes for strings, to calculate base64 encodings, escape and encode URLs/URIs and to generate GUIDs versions 1, 3, 4 and 5.
 
 ![Image of Value Generator plugin](/doc/images/launcher/plugin/community.valuegenerator.png)
 
@@ -10,7 +10,7 @@ The Value Generator plugin is used to generate hashes for strings, to calculate
 - The result of `string ResultToString()` will be used for the Result's title
 - The `Description` field will be used for the Result's subtitle
 
-### [`HashRequest`](/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/Hashing/HashRequest.cs)
+### [`HashRequest`](/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/Generators/Hashing/HashRequest.cs)
 - Implements IComputeRequest
 - Supports the hashing algorithms from System.Security.Cryptography:
   - MD5
@@ -20,19 +20,19 @@ The Value Generator plugin is used to generate hashes for strings, to calculate
   - SHA512
 - If other algorithms are added to System.Security.Cryptography, they can be added to the `_algorithms` dictionary. [`InputParser.ParseInput()`](#inputparser) will need to return a `HashRequest` for the algorithm in the query
 
-### [`Base64Request`](/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/Base64/Base64Request.cs)
+### [`Base64Request`](/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/Generators/Base64/Base64Request.cs)
 - Implements IComputeRequest
 - `Compute()` will populate `Result` with the base64 encoding of the byte array passed in the constructor
 
-### [`Base64DecodeRequest`](/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/Base64/Base64DecodeRequest.cs)
+### [`Base64DecodeRequest`](/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/Generators/Base64/Base64DecodeRequest.cs)
 - Implements IComputeRequest
 - `Compute()` will populate `Result` with the decoded byte array of the base64 string passed in the constructor
 
-### [`GUIDRequest`](/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/GUID/GUIDRequest.cs)
+### [`GUIDRequest`](/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/Generators/GUID/GUIDRequest.cs)
 - Implements IComputeRequest
 - Uses the [`GUIDGenerator`](#guidgenerator) class to generate or compute the requested GUID
 
-### [`GUIDGenerator`](/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/GUID/GUIDGenerator.cs)
+### [`GUIDGenerator`](/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/Generators/GUID/GUIDGenerator.cs)
 - Utility class for generating or calculating GUIDs
 - Generating GUID versions 1 and 4 is done using builtin APIs. [`UuidCreateSequential`](https://learn.microsoft.com/en-us/windows/win32/api/rpcdce/nf-rpcdce-uuidcreatesequential) for version 1 and `System.Guid.NewGuid()` for version 4
 - Versions 3 and 5 take two parameters, a namespace and a name
@@ -40,6 +40,32 @@ The Value Generator plugin is used to generate hashes for strings, to calculate
 - The `PredefinedNamespaces` dictionary contains aliases for the predefined namespaces
 - The name can be any string
 
+### [`UrlEncodeRequest`](/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/Generators/Uri/UrlEncodeRequest.cs)
+- Implements IComputeRequest
+- `Compute()` will populate `Result` with the encoded url converted using `HttpUtility.UrlEncode()`.
+
+### [`UrlDecodeRequest`](/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/Generators/Uri/UrlDecodeRequest.cs)
+- Implements IComputeRequest
+- `Compute()` will populate `Result` with the decoded url converted using `HttpUtility.UrlDecode()`.
+
+### [`DataEscapeRequest`](/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/Generators/Uri/DataEscapeRequest.cs)
+- Implements IComputeRequest
+- `Compute()` will populate `Result` with the escaped data string converted using `System.Uri.EscapeDataString()`.
+
+### [`DataUnescapeRequest`](/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/Generators/Uri/DataUnescapeRequest.cs)
+- Implements IComputeRequest
+- `Compute()` will populate `Result` with the unescaped data string converted using `System.Uri.UnescapeDataString()`.
+
+### [`HexEscapeRequest`](/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/Generators/Uri/HexEscapeRequest.cs)
+- Implements IComputeRequest
+- `Compute()` will populate `Result` with the escaped data string converted using `System.Uri.HexEscape()`.
+- Only single characters are supported as input.
+
+### [`HexUnescapeRequest`](/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/Generators/Uri/HexUnescapeRequest.cs)
+- Implements IComputeRequest
+- `Compute()` will populate `Result` with the unescaped data string converted using `System.Uri.HexUnescape()`.
+- Only the first hexadecimal character in the string gets unescaped. The rest of the user input is ignored.
+
 ### [`InputParser`](/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/InputParser.cs)
 - It is responsible only for parsing the query from the user
 - Based on the user query, the `ParseInput()` method must return an object that implements the `IComputeRequest` interface or it must throw one of `FormatException` or `ArgumentException`
@@ -51,6 +77,6 @@ The Value Generator plugin is used to generate hashes for strings, to calculate
 > The error message will not be shown to the user but a log message will be created
 
 ### Adding a new value generator
-1. To add a new value generator, create a folder under `/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/` and inside it add a class that implements `IComputeRequest`.
+1. To add a new value generator, create a folder under `/src/modules/launcher/Plugins/Community.PowerToys.Run.Plugin.ValueGenerator/Generators/` and inside it add a class that implements `IComputeRequest`.
 2. Add any utility classes that are specific to the new generator inside the same folder to keep them separated from the other generators.
 3. Modify the `InputParser.ParseInput()` to handle a request for the new generator and return an instance of the class you created in step 1

doc/devdocs/modules/launcher/plugins/windowwalker.md

@@ -52,7 +52,7 @@ The user can switch to the found windows, close them or kill their process.
 - It is responsible for updating the search text and performing a fuzzy search on all the open windows.
 
 ### [`Window.cs`](/src/modules/launcher/Plugins/Microsoft.Plugin.WindowWalker/Components/Window.cs)
-- The [`Window`](/src/modules/launcher/Plugins/Microsoft.Plugin.WindowWalker/Components/Window.cs) class represents a specific window and has functions to get the name of the window, the state of the window (whether it is visible or not), the `SwitchTowindow` function which switches the desktop focus to the selected window and the `CloseThisWindow` function which closes the window. The `SwitchTowindow` action is performed when the user clicks on a window walker plugin result.
+- The [`Window`](/src/modules/launcher/Plugins/Microsoft.Plugin.WindowWalker/Components/Window.cs) class represents a specific window and has functions to get the name of the window, the state of the window (whether it is visible or not), the `SwitchToWindow` function which switches the desktop focus to the selected window and the `CloseThisWindow` function which closes the window. The `switchToWindow` action is performed when the user clicks on a window walker plugin result.
 - The `Window` class holds a static cache with the process information of all windows we know so far and each window instance has a property which holds its process information (name, file, ...). The process data in the cache and the window property are of the type `WindowProcess`.
 - To get the desktop information for a window, we use the common [`VirtualDesktopHelper`](/src/modules/launcher/Wox.Plugin/Common/VirtualDesktop/VirtualDesktopHelper.cs) in `Wox.Plugin` project. The instance of `VirtualDesktopHelper` is cached in the [`Main`](/src/modules/launcher/Plugins/Microsoft.Plugin.WindowWalker/Main.cs) class of the plugin at runtime. The desktop information is stored in a property of the type [`VDesktop`](/src/modules/launcher/Wox.Plugin/Common/VirtualDesktop/VDesktop.cs).
 

doc/devdocs/modules/peek/readme.md

@@ -0,0 +1,7 @@
+# PowerToys Peek
+
+> Documentation is currently under construction
+
+## Dev file previewer
+
+The previewer for developer files uses the project in [FileExplorerCommon] common project to render monaco. You can find its documentation here: [/doc/devdocs/common/FilePreviewCommon.md](/doc/devdocs/common/FilePreviewCommon.md).

doc/devdocs/modules/powerpreview/monaco/readme.md

@@ -1,24 +0,0 @@
-# Developer Preview (Monaco)
-
-Developer preview is based on [Microsoft's Monaco Editor](https://microsoft.github.io/monaco-editor/) which is maintained by the Visual Studio Code team.
-
-## Update monaco editor
-
-1. Download Monaco editor with npm: `npm i monaco-editor`.
-2. Delete everything except the `min` folder (the minimised code).
-3. Copy the `min` folder inside the [`monacoSRC`](/src/modules/previewpane/MonacoPreviewHandler/monacoSRC) folder.
-4. Generate the JSON file (see section below)
-
-## monaco_languages.json
-
-[`monaco_languages.json`](/src/modules/previewpane/MonacoPreviewHandler/monaco_languages.json) contains all extensions and Id's for the supported languages of Monaco. The [`FileHandler`](/src/modules/previewpane/MonacoPreviewHandler/FileHandler.cs) class and the installer are using this file.
-
-### Generate monaco_languages.json file
-
-After you updated monaco editor or adding a new language you should update the [`monaco_languages.json`](/src/modules/previewpane/MonacoPreviewHandler/monaco_languages.json) file.
-
-You have to run the file on a local webserver!
-
-1. Build monaco in debug mode.
-2. Open [generateLanguagesJson.html](/src/modules/previewpane/MonacoPreviewHandler/generateLanguagesJson.html) in a browser.
-3. Replace the old JSON file.

doc/devdocs/runner.md

@@ -1,5 +1,5 @@
 #### [`main.cpp`](/src/runner/main.cpp)
-Contains the executable starting point, initialization code and the list of known PowerToys. All singletones are also initialized here at the start. Loads all the powertoys by scanning the `./modules` folder and `enable()`s those marked as enabled in `%LOCALAPPDATA%\Microsoft\PowerToys\settings.json` config. Then it runs [a message loop](https://learn.microsoft.com/windows/win32/winmsg/using-messages-and-message-queues) for the tray UI. Note that this message loop also [handles lowlevel_keyboard_hook events](https://github.com/microsoft/PowerToys/blob/1760af50c8803588cb575167baae0439af38a9c1/src/runner/lowlevel_keyboard_event.cpp#L24).
+Contains the executable starting point, initialization code and the list of known PowerToys. All singletons are also initialized here at the start. Loads all the powertoys by scanning the `./modules` folder and `enable()`s those marked as enabled in `%LOCALAPPDATA%\Microsoft\PowerToys\settings.json` config. Then it runs [a message loop](https://learn.microsoft.com/windows/win32/winmsg/using-messages-and-message-queues) for the tray UI. Note that this message loop also [handles lowlevel_keyboard_hook events](https://github.com/microsoft/PowerToys/blob/1760af50c8803588cb575167baae0439af38a9c1/src/runner/lowlevel_keyboard_event.cpp#L24).
 
 #### [`powertoy_module.h`](/src/runner/powertoy_module.h) and [`powertoy_module.cpp`](/src/runner/powertoy_module.cpp)
 Contains code for initializing and managing the PowerToy modules. `PowertoyModule` is a RAII-style holder for the `PowertoyModuleIface` pointer, which we got by [invoking module DLL's `powertoy_create` function](https://github.com/microsoft/PowerToys/blob/1760af50c8803588cb575167baae0439af38a9c1/src/runner/powertoy_module.cpp#L13-L24).

doc/devdocs/settingsv2/runner-ipc.md

@@ -4,7 +4,7 @@ The Settings v2 process uses two way IPC to communicate with the runner process.
 
 ## Initialization
 - On the settings' side, the two way IPC delegates are contained with the [`ShellPage.xaml.cs`](/src/settings-ui/Settings.UI/Views/ShellPage.xaml.cs) file. The delegates are static and the views for all the powerToys send the ipc information to the viewmodels as `ShellPage.DefaultSndMSGCallBack`.
-- These delegates are initialized within the [`Mainwindow.xaml.cs`](/src/settings-ui/Settings.UI/MainWindow.xaml.cs) file in the `Settings.Runner` project.
+- These delegates are initialized within the [`MainWindow.xaml.cs`](/src/settings-ui/Settings.UI/MainWindow.xaml.cs) file in the `Settings.Runner` project.
 
 
 ## Types of IPC delegates

doc/devdocs/settingsv2/viewmodels.md

@@ -22,5 +22,5 @@ The viewmodels are located within the [`Settings.UI.Library`](/src/settings-ui/S
     - Some viewmodels expect the runner to create the file instead of creating the file themselves, like in keyboard manager.
     - The colorpicker powertoy creates the `settings.json` within the module. This must be taken care of when encapsulated within the settingsRepository.
 - Currently, all modules use the `SettingsRepository` to access the General Settings config. 
-- However, only Fancyzones, ShortcutGuide and PowerPreview use the `SettingsRepository` to access the module properties.
+- However, only FancyZones, ShortcutGuide and PowerPreview use the `SettingsRepository` to access the module properties.
 

doc/devdocs/tools/fancyzones-hit-test.md

@@ -1,5 +1,5 @@
 # [FancyZone hit test tool](/tools/FancyZone_HitTest/)
 
-![Image of the FancyZones hit test tool](/doc/images/tools/fancyzone-hit-test.png)
+![Image of the FancyZones hit test tool](/doc/images/tools/fancyzones-hit-test.png)
 
 This tool tests the FancyZones layout selection logic. It displays a window with 5 zones. By hovering the mouse over the zones, the zone under the mouse cursor is highlighted. The sidebar shows different metrics that are used to determine which zone is under the mouse cursor.

doc/devdocs/tools/readme.md

@@ -11,7 +11,7 @@ Following tools are currently available:
 * [BugReportTool](bug-report-tool.md) - A tool to collect logs and system information for bug reports.
 * [Build tools](build-tools.md) - A set of scripts that help building PowerToys.
 * [Clean up tool](clean-up-tool.md) - A tool to clean up the PowerToys installation.
-* [FancyZones hit test](fancyzone-hit-test.md) - A tool to test FancyZones layout selection logic.
+* [FancyZones hit test](fancyzones-hit-test.md) - A tool to test FancyZones layout selection logic.
 * [FancyZones draw layout test](fancyzones-draw-layout-test.md) - A tool to test FancyZones layout drawing logic.
 * [FancyZones zonable tester](fancyzones-zonable-tester.md) - A tool to test if a window is zonable.
 * [Monitor info report](monitor-info-report.md) - A small diagnostic tool which helps identifying WinAPI bugs related to the physical monitor detection.

doc/thirdPartyRunPlugins.md

@@ -33,3 +33,4 @@ Contact the developers of a plugin directly for assistance with a specific plugi
 | [Quick Lookup](https://github.com/GTGalaxi/quick-lookup-ptrun) | [gtgalaxi](https://github.com/GTGalaxi) | Search across multiple cyber security tools |
 | [Visual Studio](https://github.com/davidegiacometti/PowerToys-Run-VisualStudio) | [davidegiacometti](https://github.com/davidegiacometti) | Open Visual Studio recents |
 | [WinGet](https://github.com/bostrot/PowerToysRunPluginWinget) | [bostrot](https://github.com/bostrot) | Search and install packages from WinGet |
+| [Scoop](https://github.com/Quriz/PowerToysRunScoop) | [Quriz](https://github.com/Quriz) | Search and install packages from Scoop |

installer/PowerToysSetup/CmdNotFound.wxs

@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Wix xmlns="http://schemas.microsoft.com/wix/2006/wi"
+  xmlns:util="http://schemas.microsoft.com/wix/UtilExtension">
+
+  <?include $(sys.CURRENTDIR)\Common.wxi?>
+
+  <Fragment>
+    <DirectoryRef Id="INSTALLFOLDER" FileSource="$(var.BinDir)">
+      <!-- !Warning! Make sure to change Component Guid if you update the file list -->
+      <Component Id="Module_CmdNotFound" Win64="yes" Guid="80F648F2-29F6-4685-AED4-04DC1B6EE176">
+        <RegistryKey Root="$(var.RegistryScope)" Key="Software\Classes\powertoys\components">
+          <RegistryValue Type="string" Name="Module_CmdNotFound" Value="" KeyPath="yes"/>
+        </RegistryKey>
+        <File Source="$(var.BinDir)WinGetCommandNotFound.psd1" />
+        <!-- The dll files will be picked up by BaseApplications generateAllFileComponents.ps1-->
+      </Component>
+    </DirectoryRef>
+
+    <ComponentGroup Id="CmdNotFoundComponentGroup">
+      <ComponentRef Id="Module_CmdNotFound" />
+    </ComponentGroup>
+
+  </Fragment>
+</Wix>

installer/PowerToysSetup/Common.wxi

@@ -18,6 +18,7 @@
   <?define PastePlainProjectName="PastePlain"?>
   <?define RegistryPreviewProjectName="RegistryPreview"?>
   <?define PeekProjectName="Peek"?>
+  <?define CmdNotFoundProjectName="CmdNotFound"?>
   
   <?define RepoDir="$(var.ProjectDir)..\..\" ?>
   <?if $(var.Platform) = x64?>

installer/PowerToysSetup/PowerToysInstaller.wixproj

@@ -1,8 +1,8 @@
 <?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" DefaultTargets="Build" InitialTargets="EnsureNuGetPackageBuildImports" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+<Project ToolsVersion="4.0" DefaultTargets="Build" InitialTargets="EnsureNuGetPackageBuildImports"
+  xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
   <Import Project="..\wix.props" Condition="Exists('..\wix.props')" />
   <Import Project="..\..\src\Version.props" />
-
   <PropertyGroup Condition="'$(Platform)' == 'x64'">
     <DefineConstants>Version=$(Version);MonacoSRCHarvestPath=$(ProjectDir)..\..\x64\$(Configuration)\Assets\Monaco\monacoSRC</DefineConstants>
     <!-- THIS IS AN INNER LOOP OPTIMIZATION
@@ -10,23 +10,23 @@
     using a specific profile. If you're doing local installer builds, this will
     simulate the build pipeline doing that for you. -->
     <PreBuildEvent>IF NOT DEFINED IsPipeline (
-call "$([MSBuild]::GetVsInstallRoot())\Common7\Tools\VsDevCmd.bat" -arch=amd64 -host_arch=amd64 -winsdk=10.0.19041.0
+call "$([MSBuild]::GetVsInstallRoot())\Common7\Tools\VsDevCmd.bat" -arch=amd64 -host_arch=amd64 -winsdk=10.0.19041.0 -vcvars_ver=$(VCToolsVersion)
 SET PTRoot=$(SolutionDir)\..
 call "..\..\..\publish.cmd" x64
 )
 call powershell.exe -NonInteractive -executionpolicy Unrestricted -File $(MSBuildThisFileDirectory)\generateMonacoWxs.ps1 -monacoWxsFile "$(MSBuildThisFileDirectory)\MonacoSRC.wxs"
-</PreBuildEvent>
+    </PreBuildEvent>
   </PropertyGroup>
 
   <PropertyGroup Condition="'$(Platform)' != 'x64'">
     <DefineConstants>Version=$(Version);MonacoSRCHarvestPath=$(ProjectDir)..\..\ARM64\$(Configuration)\Assets\Monaco\monacoSRC</DefineConstants>
     <PreBuildEvent>IF NOT DEFINED IsPipeline (
-call "$([MSBuild]::GetVsInstallRoot())\Common7\Tools\VsDevCmd.bat" -arch=arm64 -host_arch=amd64 -winsdk=10.0.19041.0
+call "$([MSBuild]::GetVsInstallRoot())\Common7\Tools\VsDevCmd.bat" -arch=arm64 -host_arch=amd64 -winsdk=10.0.19041.0 -vcvars_ver=$(VCToolsVersion)
 SET PTRoot=$(SolutionDir)\..
 call "..\..\..\publish.cmd" arm64
 )
 call powershell.exe -NonInteractive -executionpolicy Unrestricted -File $(MSBuildThisFileDirectory)\generateMonacoWxs.ps1 -monacoWxsFile "$(MSBuildThisFileDirectory)\MonacoSRC.wxs"
-</PreBuildEvent>
+    </PreBuildEvent>
   </PropertyGroup>
   <PropertyGroup>
     <RunPostBuildEvent>Always</RunPostBuildEvent>
@@ -68,7 +68,7 @@ call powershell.exe -NonInteractive -executionpolicy Unrestricted -File $(MSBuil
 
   <PropertyGroup>
     <!-- We do not support debug installer builds -->
-    <Configuration Condition=" '$(Configuration)' == '' ">Release</Configuration> 
+    <Configuration Condition=" '$(Configuration)' == '' ">Release</Configuration>
     <Platform>$(Platform)</Platform>
     <ProductVersion>3.10</ProductVersion>
     <ProjectGuid>022a9d30-7c4f-416d-a9df-5ff2661cc0ad</ProjectGuid>
@@ -104,6 +104,7 @@ call powershell.exe -NonInteractive -executionpolicy Unrestricted -File $(MSBuil
 
     <Compile Include="Awake.wxs" />
     <Compile Include="BaseApplications.wxs" />
+    <Compile Include="CmdNotFound.wxs" />
     <Compile Include="ColorPicker.wxs" />
     <Compile Include="EnvironmentVariables.wxs" />
     <Compile Include="FileExplorerPreview.wxs" />
@@ -181,18 +182,6 @@ call powershell.exe -NonInteractive -executionpolicy Unrestricted -File $(MSBuil
 	<Target Name="AfterBuild">
 	</Target> -->
   <Target Name="BeforeBuild">
-    <HeatDirectory Directory="..\..\src\common\FilePreviewCommon\Assets\Monaco\monacoSRC"
-      PreprocessorVariable="var.MonacoSRCHarvestPath"
-      OutputFile="MonacoSRC.wxs"
-      ComponentGroupName="MonacoSRCHeatGenerated"
-      DirectoryRefId="MonacoPreviewHandlerMonacoSRCFolder"
-      AutogenerateGuids="false"
-      GenerateGuidsNow="true" 
-      ToolPath="$(WixToolPath)"
-      RunAsSeparateProcess="true"
-      SuppressFragments="false"
-      SuppressRegistry="false"
-      SuppressRootDirectory="true"/>
+    <HeatDirectory Directory="..\..\src\common\FilePreviewCommon\Assets\Monaco\monacoSRC" PreprocessorVariable="var.MonacoSRCHarvestPath" OutputFile="MonacoSRC.wxs" ComponentGroupName="MonacoSRCHeatGenerated" DirectoryRefId="MonacoPreviewHandlerMonacoSRCFolder" AutogenerateGuids="false" GenerateGuidsNow="true" ToolPath="$(WixToolPath)" RunAsSeparateProcess="true" SuppressFragments="false" SuppressRegistry="false" SuppressRootDirectory="true"/>
   </Target>
-
 </Project>

installer/PowerToysSetup/Product.wxs

@@ -72,6 +72,7 @@
       <ComponentGroupRef Id="VideoConferenceComponentGroup" />
       <ComponentGroupRef Id="MouseWithoutBordersComponentGroup" />
       <ComponentGroupRef Id="EnvironmentVariablesComponentGroup" />
+      <ComponentGroupRef Id="CmdNotFoundComponentGroup" />
         
       <ComponentGroupRef Id="ResourcesComponentGroup" />
       <ComponentGroupRef Id="WindowsAppSDKComponentGroup" />
@@ -133,6 +134,7 @@
     <InstallExecuteSequence>
       <Custom Action="DetectPrevInstallPath" After="AppSearch" />
       <Custom Action="SetLaunchPowerToysParam" Before="LaunchPowerToys" />
+      <Custom Action="SetUninstallCommandNotFoundParam" Before="UninstallCommandNotFound" />
       <Custom Action="SetApplyModulesRegistryChangeSetsParam" Before="ApplyModulesRegistryChangeSets" />
       <Custom Action="SetUnApplyModulesRegistryChangeSetsParam" Before="UnApplyModulesRegistryChangeSets" />
       <Custom Action="CheckGPO" After="InstallInitialize">
@@ -159,6 +161,9 @@
       <Custom Action="UnRegisterContextMenuPackages" Before="RemoveFiles">
         Installed AND (REMOVE="ALL")
       </Custom>
+      <Custom Action="UninstallCommandNotFound" Before="RemoveFiles">
+        Installed AND (NOT UPGRADINGPRODUCTCODE) AND (REMOVE="ALL")
+      </Custom>
       <Custom Action="UninstallServicesTask" After="InstallFinalize">
           Installed AND (NOT UPGRADINGPRODUCTCODE) AND (REMOVE="ALL")
       </Custom>
@@ -200,6 +205,10 @@
                     Property="UnApplyModulesRegistryChangeSets"
                     Value="[INSTALLFOLDER]" />
 
+    <CustomAction Id="SetUninstallCommandNotFoundParam"
+                    Property="UninstallCommandNotFound"
+                    Value="[INSTALLFOLDER]" />
+
     <CustomAction Id="SetCreateWinAppSDKHardlinksParam"
                     Property="CreateWinAppSDKHardlinks"
                     Value="[INSTALLFOLDER]" />
@@ -252,7 +261,15 @@
                     BinaryKey="PTCustomActions"
                     DllEntry="UninstallServicesCA"
                    />
-      
+
+      <CustomAction Id="UninstallCommandNotFound"
+                    Return="ignore"
+                    Impersonate="yes"
+                    Execute="deferred"
+                    BinaryKey="PTCustomActions"
+                    DllEntry="UninstallCommandNotFoundModuleCA"
+                   />
+
       <CustomAction Id="TelemetryLogInstallSuccess"
               Return="ignore"
               Impersonate="yes"

installer/PowerToysSetup/Resources.wxs

@@ -402,6 +402,33 @@
         </RegistryKey>
         <File Id="Launcher_ValueGenerator_$(var.IdSafeLanguage)_File" Source="$(var.BinDir)RunPlugins\ValueGenerator\$(var.Language)\Community.PowerToys.Run.Plugin.ValueGenerator.resources.dll" />
       </Component>
+      <Component
+          Id="QoiPreviewHandler_$(var.IdSafeLanguage)_Component"
+          Directory="Resource$(var.IdSafeLanguage)INSTALLFOLDER"
+          Guid="$(var.CompGUIDPrefix)1E">
+        <RegistryKey Root="$(var.RegistryScope)" Key="Software\Classes\powertoys\components">
+          <RegistryValue Type="string" Name="QoiPreviewHandler_$(var.IdSafeLanguage)_Component" Value="" KeyPath="yes"/>
+        </RegistryKey>
+        <File Id="QoiPreviewHandler_$(var.IdSafeLanguage)_File" Source="$(var.BinDir)\$(var.Language)\PowerToys.QoiPreviewHandler.resources.dll" />
+      </Component>
+      <Component
+          Id="Awake_$(var.IdSafeLanguage)_Component"
+          Directory="Resource$(var.IdSafeLanguage)INSTALLFOLDER"
+          Guid="$(var.CompGUIDPrefix)1F">
+        <RegistryKey Root="$(var.RegistryScope)" Key="Software\Classes\powertoys\components">
+          <RegistryValue Type="string" Name="Awake_$(var.IdSafeLanguage)_Component" Value="" KeyPath="yes"/>
+        </RegistryKey>
+        <File Id="Awake_$(var.IdSafeLanguage)_File" Source="$(var.BinDir)\$(var.Language)\PowerToys.Awake.resources.dll" />
+      </Component>
+      <Component
+          Id="PowerOCR_$(var.IdSafeLanguage)_Component"
+          Directory="Resource$(var.IdSafeLanguage)INSTALLFOLDER"
+          Guid="$(var.CompGUIDPrefix)20">
+        <RegistryKey Root="$(var.RegistryScope)" Key="Software\Classes\powertoys\components">
+          <RegistryValue Type="string" Name="PowerOCR_$(var.IdSafeLanguage)_Component" Value="" KeyPath="yes"/>
+        </RegistryKey>
+        <File Id="PowerOCR_$(var.IdSafeLanguage)_File" Source="$(var.BinDir)\$(var.Language)\PowerToys.PowerOCR.resources.dll" />
+      </Component>
       <?undef IdSafeLanguage?>
       <?undef CompGUIDPrefix?>
       <?endforeach?>

installer/PowerToysSetup/Settings.wxs

@@ -19,12 +19,14 @@
   <Fragment>
     <DirectoryRef Id="WinUI3AppsAssetsFolder">
       <Directory Id="SettingsV2AssetsInstallFolder" Name="Settings">
+        <Directory Id="SettingsAppAssetsScriptsFolder" Name="Scripts"/>
         <Directory Id="SettingsV2OOBEAssetsFluentIconsInstallFolder" Name="FluentIcons" />
         <Directory Id="SettingsV2AssetsModulesInstallFolder" Name="Modules" >
           <Directory Id="SettingsV2OOBEAssetsModulesInstallFolder" Name="OOBE" />
         </Directory>
       </Directory>
     </DirectoryRef>
+
     <DirectoryRef Id="SettingsV2AssetsInstallFolder" FileSource="$(var.SettingsV2AssetsFilesPath)">
     <!-- Generated by generateFileComponents.ps1 -->
     <!--SettingsV2AssetsFiles_Component_Def-->
@@ -45,6 +47,19 @@
     <!--SettingsV2OOBEAssetsFluentIconsFiles_Component_Def-->
     </DirectoryRef>
 
+    <DirectoryRef Id="SettingsAppAssetsScriptsFolder" FileSource="$(var.SettingsV2AssetsFilesPath)\Scripts\">
+      <Component Id="CommandNotFound_Scripts" Win64="yes" Guid="898EFA1E-EDD3-4F4B-8C7F-4A14B0D05B02">
+        <RegistryKey Root="$(var.RegistryScope)" Key="Software\Classes\powertoys\components">
+          <RegistryValue Type="string" Name="CommandNotFound_Scripts" Value="" KeyPath="yes"/>
+        </RegistryKey>
+        <File Id="CommandNotFound_Scripts_EnableModule.ps1" Source="$(var.SettingsV2AssetsFilesPath)\Scripts\EnableModule.ps1" />
+        <File Id="CommandNotFound_Scripts_DisableModule.ps1" Source="$(var.SettingsV2AssetsFilesPath)\Scripts\DisableModule.ps1" />
+        <File Id="CommandNotFound_Scripts_CheckCmdNotFoundRequirements.ps1" Source="$(var.SettingsV2AssetsFilesPath)\Scripts\CheckCmdNotFoundRequirements.ps1" />
+        <File Id="CommandNotFound_Scripts_InstallWinGetClientModule.ps1" Source="$(var.SettingsV2AssetsFilesPath)\Scripts\InstallWinGetClientModule.ps1" />
+        <File Id="CommandNotFound_Scripts_InstallPowerShell7.ps1" Source="$(var.SettingsV2AssetsFilesPath)\Scripts\InstallPowerShell7.ps1" />
+      </Component>
+    </DirectoryRef>
+
     <ComponentGroup Id="SettingsComponentGroup">
 
       <Component Id="RemoveSettingsFolder" Guid="2D3AEF68-4E5A-4FF9-A5C0-9E53391AC754" Directory="SettingsV2AssetsInstallFolder" >
@@ -55,7 +70,9 @@
         <RemoveFolder Id="RemoveFolderSettingsV2OOBEAssetsFluentIconsInstallFolder" Directory="SettingsV2OOBEAssetsFluentIconsInstallFolder" On="uninstall"/>
         <RemoveFolder Id="RemoveFolderSettingsV2AssetsModulesInstallFolder" Directory="SettingsV2AssetsModulesInstallFolder" On="uninstall"/>
         <RemoveFolder Id="RemoveFolderSettingsV2OOBEAssetsModulesInstallFolder" Directory="SettingsV2OOBEAssetsModulesInstallFolder" On="uninstall"/>
+        <RemoveFolder Id="RemoveFolderSettingsAppAssetsScriptsFolder" Directory="SettingsAppAssetsScriptsFolder" On="uninstall"/>
       </Component>
+      <ComponentRef Id="CommandNotFound_Scripts"/>
     </ComponentGroup>
 
   </Fragment>

installer/PowerToysSetup/publish.cmd

@@ -4,13 +4,10 @@ IF NOT DEFINED PTRoot (SET PTRoot=..\..)
 
 SET PlatformArg=%1
 IF NOT DEFINED PlatformArg (SET PlatformArg=x64)
+SET VCToolsVersion=!VCToolsVersion!
+SET ClearDevCommandPromptEnvVars=false
 
 rem In case of Release we should not use Debug CRT in VCRT forwarders
-msbuild !PTRoot!\src\settings-ui\Settings.UI\PowerToys.Settings.csproj -t:Publish -p:Configuration="Release" -p:Platform="!PlatformArg!" -p:PowerToysRoot=!PTRoot! -p:AppxBundle=Never -p:VCRTForwarders-IncludeDebugCRT=false -p:PublishProfile=InstallationPublishProfile.pubxml
-
-rem In case of Release we should not use Debug CRT in VCRT forwarders
-msbuild !PTRoot!\src\modules\launcher\PowerLauncher\PowerLauncher.csproj -t:Publish -p:Configuration="Release" -p:Platform="!PlatformArg!" -p:AppxBundle=Never -p:PowerToysRoot=!PTRoot! -p:VCRTForwarders-IncludeDebugCRT=false -p:PublishProfile=InstallationPublishProfile.pubxml
-
 msbuild !PTRoot!\src\modules\previewpane\MonacoPreviewHandler\MonacoPreviewHandler.csproj -t:Publish -p:Configuration="Release" -p:Platform="!PlatformArg!" -p:AppxBundle=Never -p:PowerToysRoot=!PTRoot! -p:VCRTForwarders-IncludeDebugCRT=false -p:PublishProfile=InstallationPublishProfile.pubxml
 
 msbuild !PTRoot!\src\modules\previewpane\MarkdownPreviewHandler\MarkdownPreviewHandler.csproj -t:Publish -p:Configuration="Release" -p:Platform="!PlatformArg!" -p:AppxBundle=Never -p:PowerToysRoot=!PTRoot! -p:VCRTForwarders-IncludeDebugCRT=false -p:PublishProfile=InstallationPublishProfile.pubxml
@@ -18,5 +15,3 @@ msbuild !PTRoot!\src\modules\previewpane\MarkdownPreviewHandler\MarkdownPreviewH
 msbuild !PTRoot!\src\modules\previewpane\SvgPreviewHandler\SvgPreviewHandler.csproj -t:Publish -p:Configuration="Release" -p:Platform="!PlatformArg!" -p:AppxBundle=Never -p:PowerToysRoot=!PTRoot! -p:VCRTForwarders-IncludeDebugCRT=false -p:PublishProfile=InstallationPublishProfile.pubxml
 
 msbuild !PTRoot!\src\modules\previewpane\SvgThumbnailProvider\SvgThumbnailProvider.csproj -t:Publish -p:Configuration="Release" -p:Platform="!PlatformArg!" -p:AppxBundle=Never -p:PowerToysRoot=!PTRoot! -p:VCRTForwarders-IncludeDebugCRT=false -p:PublishProfile=InstallationPublishProfile.pubxml
-
-msbuild !PTRoot!\src\modules\FileLocksmith\FileLocksmithUI\FileLocksmithUI.csproj -t:Publish -p:Configuration="Release" -p:Platform="!PlatformArg!" -p:AppxBundle=Never -p:PowerToysRoot=!PTRoot! -p:VCRTForwarders-IncludeDebugCRT=false -p:PublishProfile=InstallationPublishProfile.pubxml

installer/PowerToysSetupCustomActions/CustomAction.cpp

@@ -433,7 +433,29 @@ UINT __stdcall RemoveWindowsServiceByName(std::wstring serviceName)
     return ERROR_SUCCESS;
 }
 
+UINT __stdcall UninstallCommandNotFoundModuleCA(MSIHANDLE hInstall)
+{
+    HRESULT hr = S_OK;
+    UINT er = ERROR_SUCCESS;
+    std::wstring installationFolder;
+    std::string command;
 
+    hr = WcaInitialize(hInstall, "UninstallCommandNotFoundModule");
+    ExitOnFailure(hr, "Failed to initialize");
+
+    hr = getInstallFolder(hInstall, installationFolder);
+    ExitOnFailure(hr, "Failed to get installFolder.");
+
+    command = "pwsh.exe";
+    command += " ";
+    command += "-NoProfile -NonInteractive -NoLogo -WindowStyle Hidden -ExecutionPolicy Unrestricted -File \"" + winrt::to_string(installationFolder) + "\\WinUI3Apps\\Assets\\Settings\\Scripts\\DisableModule.ps1" + "\"";
+
+    system(command.c_str());
+
+LExit:
+    er = SUCCEEDED(hr) ? ERROR_SUCCESS : ERROR_INSTALL_FAILURE;
+    return WcaFinalize(er);
+}
 
 UINT __stdcall UninstallServicesCA(MSIHANDLE hInstall)
 {
@@ -1005,7 +1027,7 @@ UINT __stdcall TerminateProcessesCA(MSIHANDLE hInstall)
     }
     processes.resize(bytes / sizeof(processes[0]));
 
-    std::array<std::wstring_view, 29> processesToTerminate = {
+    std::array<std::wstring_view, 31> processesToTerminate = {
         L"PowerToys.PowerLauncher.exe",
         L"PowerToys.Settings.exe",
         L"PowerToys.Awake.exe",
@@ -1026,7 +1048,9 @@ UINT __stdcall TerminateProcessesCA(MSIHANDLE hInstall)
         L"PowerToys.StlThumbnailProvider.exe",
         L"PowerToys.SvgThumbnailProvider.exe",
         L"PowerToys.GcodePreviewHandler.exe",
+        L"PowerToys.QoiPreviewHandler.exe",
         L"PowerToys.PdfPreviewHandler.exe",
+        L"PowerToys.QoiThumbnailProvider.exe",
         L"PowerToys.SvgPreviewHandler.exe",
         L"PowerToys.Peek.UI.exe",
         L"PowerToys.MouseWithoutBorders.exe",

installer/PowerToysSetupCustomActions/CustomAction.def

@@ -22,4 +22,5 @@ EXPORTS
 	UninstallVirtualCameraDriverCA
 	UnRegisterContextMenuPackagesCA
 	UninstallEmbeddedMSIXCA
-	UninstallServicesCA
+	UninstallServicesCA
+	UninstallCommandNotFoundModuleCA

src/.editorconfig

@@ -96,4 +96,4 @@ end_of_line = crlf
 dotnet_diagnostic.IDE0065.severity = none
 
 # IDE0009: Add this or Me qualification
-dotnet_diagnostic.IDE0009.severity = none
+dotnet_diagnostic.IDE0009.severity = none

src/Version.props

@@ -3,5 +3,8 @@
   <PropertyGroup>
     <Version>0.0.1</Version>
     <DevEnvironment>Local</DevEnvironment>
+
+    <!-- Forcing for every DLL on by default -->
+    <ChecksumAlgorithm>SHA256</ChecksumAlgorithm>
   </PropertyGroup>
 </Project>

src/common/AllExperiments/AllExperiments.csproj

@@ -1,7 +1,7 @@
 <Project Sdk="Microsoft.NET.Sdk">
   <Import Project="..\..\Version.props" />
   <PropertyGroup>
-    <TargetFramework>net7.0-windows10.0.20348.0</TargetFramework>
+    <TargetFramework>net8.0-windows10.0.20348.0</TargetFramework>
     <TargetPlatformMinVersion>10.0.19041.0</TargetPlatformMinVersion>
     <SupportedOSPlatformVersion>10.0.19041.0</SupportedOSPlatformVersion>
     <ImplicitUsings>enable</ImplicitUsings>

src/common/AllExperiments/Experiments.cs

@@ -76,9 +76,10 @@ namespace AllExperiments
 
                     if (jsonDictionary != null)
                     {
-                        if (!jsonDictionary.ContainsKey("dataversion"))
+                        if (!jsonDictionary.TryGetValue("dataversion", out object? value))
                         {
-                            jsonDictionary.Add("dataversion", dataVersion);
+                            value = dataVersion;
+                            jsonDictionary.Add("dataversion", value);
                         }
 
                         if (!jsonDictionary.ContainsKey("variantassignment"))
@@ -87,7 +88,7 @@ namespace AllExperiments
                         }
                         else
                         {
-                            var jsonDataVersion = jsonDictionary["dataversion"].ToString();
+                            var jsonDataVersion = value.ToString();
                             if (jsonDataVersion != null && int.Parse(jsonDataVersion, CultureInfo.InvariantCulture) < dataVersion)
                             {
                                 jsonDictionary["dataversion"] = dataVersion;
@@ -116,9 +117,9 @@ namespace AllExperiments
 
                 if (jsonDictionary != null)
                 {
-                    if (jsonDictionary.ContainsKey("variantassignment"))
+                    if (jsonDictionary.TryGetValue("variantassignment", out object? value))
                     {
-                        if (jsonDictionary["variantassignment"].ToString() == "alternate" && AssignmentUnit != string.Empty)
+                        if (value.ToString() == "alternate" && AssignmentUnit != string.Empty)
                         {
                             IsExperiment = true;
                         }
@@ -144,7 +145,7 @@ namespace AllExperiments
 
         private string? AssignmentUnit { get; set; }
 
-        private IVariantAssignmentRequest GetVariantAssignmentRequest()
+        private VariantAssignmentRequest GetVariantAssignmentRequest()
         {
             var jsonFilePath = CreateFilePath();
             try

src/common/Common.UI/Common.UI.csproj

@@ -2,7 +2,7 @@
   <Import Project="..\..\Version.props" />
   
   <PropertyGroup>
-    <TargetFramework>net7.0-windows</TargetFramework>
+    <TargetFramework>net8.0-windows</TargetFramework>
 	<RuntimeIdentifiers>win-x64;win-arm64</RuntimeIdentifiers>
     <UseWPF>true</UseWPF>
     <AssemblyName>PowerToys.Common.UI</AssemblyName>

src/common/Common.UI/OSVersionHelper.cs

@@ -0,0 +1,16 @@
+// Copyright (c) Microsoft Corporation
+// The Microsoft Corporation licenses this file to you under the MIT license.
+// See the LICENSE file in the project root for more information.
+
+using System;
+
+namespace Common.UI
+{
+    public static class OSVersionHelper
+    {
+        public static bool IsWindows11()
+        {
+            return Environment.OSVersion.Version.Major >= 10 && Environment.OSVersion.Version.Build >= 22000;
+        }
+    }
+}

src/common/FilePreviewCommon/FilePreviewCommon.csproj

@@ -3,17 +3,22 @@
   <Import Project="..\..\Version.props" />
 
   <PropertyGroup>
-    <TargetFramework>net7.0-windows</TargetFramework>
-	<RuntimeIdentifiers>win-x64;win-arm64</RuntimeIdentifiers>
+    <TargetFramework>net8.0-windows</TargetFramework>
+    <RuntimeIdentifiers>win-x64;win-arm64</RuntimeIdentifiers>
     <Version>$(Version).0</Version>
     <Authors>Microsoft Corporation</Authors>
     <Product>PowerToys</Product>
     <Description>PowerToys FilePreviewCommon</Description>
     <AssemblyName>PowerToys.FilePreviewCommon</AssemblyName>
+    <UseWindowsForms>true</UseWindowsForms>
+    <AllowUnsafeBlocks>true</AllowUnsafeBlocks>
+    <Nullable>enable</Nullable>
   </PropertyGroup>
 
   <ItemGroup>
     <PackageReference Include="Markdig.Signed" />
+    <PackageReference Include="System.Text.Encoding.CodePages" />
+    <PackageReference Include="UTF.Unknown" />
   </ItemGroup>
 
   <ItemGroup>
@@ -30,7 +35,7 @@
       <CopyToOutputDirectory>Always</CopyToOutputDirectory>
     </None>
     <Content Include="Assets\Monaco\monacoSRC\**">
-        <CopyToOutputDirectory>Always</CopyToOutputDirectory>
+      <CopyToOutputDirectory>Always</CopyToOutputDirectory>
     </Content>
     <None Update="Assets\Monaco\monaco_languages.json">
       <CopyToOutputDirectory>Always</CopyToOutputDirectory>

src/common/FilePreviewCommon/Formatters/JsonFormatter.cs

@@ -12,6 +12,12 @@ namespace Microsoft.PowerToys.FilePreviewCommon.Monaco.Formatters
         /// <inheritdoc/>
         public string LangSet => "json";
 
+        private static readonly JsonSerializerOptions _serializerOptions = new JsonSerializerOptions
+        {
+            WriteIndented = true,
+            Encoder = JavaScriptEncoder.UnsafeRelaxedJsonEscaping,
+        };
+
         /// <inheritdoc/>
         public string Format(string value)
         {
@@ -22,11 +28,7 @@ namespace Microsoft.PowerToys.FilePreviewCommon.Monaco.Formatters
 
             using (var jDocument = JsonDocument.Parse(value, new JsonDocumentOptions { CommentHandling = JsonCommentHandling.Skip }))
             {
-                return JsonSerializer.Serialize(jDocument, new JsonSerializerOptions
-                {
-                    WriteIndented = true,
-                    Encoder = JavaScriptEncoder.UnsafeRelaxedJsonEscaping,
-                });
+                return JsonSerializer.Serialize(jDocument, _serializerOptions);
             }
         }
     }

src/common/FilePreviewCommon/Formatters/XmlFormatter.cs

@@ -26,7 +26,7 @@ namespace Microsoft.PowerToys.FilePreviewCommon.Monaco.Formatters
             var stringBuilder = new StringBuilder();
             var xmlWriterSettings = new XmlWriterSettings()
             {
-                OmitXmlDeclaration = xmlDocument.FirstChild.NodeType != XmlNodeType.XmlDeclaration,
+                OmitXmlDeclaration = xmlDocument.FirstChild?.NodeType != XmlNodeType.XmlDeclaration,
                 Indent = true,
             };
 

src/common/FilePreviewCommon/GcodeHelper.cs

@@ -8,7 +8,7 @@ using System.IO;
 using System.Linq;
 using System.Text;
 
-namespace Common.Utilities
+namespace Microsoft.PowerToys.FilePreviewCommon
 {
     /// <summary>
     /// Gcode file helper class.

src/common/FilePreviewCommon/GcodeThumbnail.cs

@@ -5,9 +5,8 @@
 using System;
 using System.Drawing;
 using System.IO;
-using PreviewHandlerCommon.Utilities;
 
-namespace Common.Utilities
+namespace Microsoft.PowerToys.FilePreviewCommon
 {
     /// <summary>
     /// Represents a gcode thumbnail.

src/common/FilePreviewCommon/GcodeThumbnailFormat.cs

@@ -2,7 +2,7 @@
 // The Microsoft Corporation licenses this file to you under the MIT license.
 // See the LICENSE file in the project root for more information.
 
-namespace Common.Utilities
+namespace Microsoft.PowerToys.FilePreviewCommon
 {
     /// <summary>
     /// The gcode thumbnail image format.

src/common/FilePreviewCommon/MarkdownHelper.cs

@@ -30,7 +30,7 @@ namespace Microsoft.PowerToys.FilePreviewCommon
 
             // Extension to modify markdown AST.
             HTMLParsingExtension extension = new HTMLParsingExtension(imagesBlockedCallBack);
-            extension.FilePath = Path.GetDirectoryName(filePath);
+            extension.FilePath = Path.GetDirectoryName(filePath) ?? string.Empty;
 
             // if you have a string with double space, some people view it as a new line.
             // while this is against spec, even GH supports this. Technically looks like GH just trims whitespace

src/common/FilePreviewCommon/MonacoHelper.cs

@@ -28,12 +28,12 @@ namespace Microsoft.PowerToys.FilePreviewCommon
             new XmlFormatter(),
         }.AsReadOnly();
 
-        private static string _monacoDirectory;
+        private static string? _monacoDirectory;
 
         public static string GetRuntimeMonacoDirectory()
         {
             string codeBase = Assembly.GetExecutingAssembly().Location;
-            string path = Path.GetFullPath(Path.Combine(Path.GetDirectoryName(codeBase), "Assets", "Monaco"));
+            string path = Path.GetFullPath(Path.Combine(Path.GetDirectoryName(codeBase) ?? string.Empty, "Assets", "Monaco"));
             if (Path.Exists(path))
             {
                 return path;
@@ -41,7 +41,7 @@ namespace Microsoft.PowerToys.FilePreviewCommon
             else
             {
                 // We're likely in WinUI3Apps directory and need to go back to the base directory.
-                return Path.GetFullPath(Path.Combine(Path.GetDirectoryName(codeBase), "..", "Assets", "Monaco"));
+                return Path.GetFullPath(Path.Combine(Path.GetDirectoryName(codeBase) ?? string.Empty, "..", "Assets", "Monaco"));
             }
         }
 
@@ -107,6 +107,7 @@ namespace Microsoft.PowerToys.FilePreviewCommon
         public static string ReadIndexHtml()
         {
             string html;
+
             using (StreamReader htmlFileReader = new StreamReader(new FileStream(MonacoDirectory + "\\index.html", FileMode.Open, FileAccess.Read, FileShare.ReadWrite)))
             {
                 html = htmlFileReader.ReadToEnd();

src/common/FilePreviewCommon/QoiImage.cs

@@ -0,0 +1,177 @@
+// Copyright (c) Microsoft Corporation
+// The Microsoft Corporation licenses this file to you under the MIT license.
+// See the LICENSE file in the project root for more information.
+
+using System;
+using System.Buffers.Binary;
+using System.Drawing;
+using System.Drawing.Imaging;
+using System.IO;
+using System.Text;
+
+//// Based on https://github.com/phoboslab/qoi/blob/master/qoi.h
+
+namespace Microsoft.PowerToys.FilePreviewCommon
+{
+    /// <summary>
+    /// QOI Image helper.
+    /// </summary>
+    public static class QoiImage
+    {
+#pragma warning disable SA1310 // Field names should not contain underscore
+        private const byte QOI_OP_INDEX = 0x00; // 00xxxxxx
+        private const byte QOI_OP_DIFF = 0x40;  // 01xxxxxx
+        private const byte QOI_OP_LUMA = 0x80;  // 10xxxxxx
+        private const byte QOI_OP_RUN = 0xc0;   // 11xxxxxx
+        private const byte QOI_OP_RGB = 0xfe;   // 11111110
+        private const byte QOI_OP_RGBA = 0xff;  // 11111111
+
+        private const byte QOI_MASK_2 = 0xc0;   // 11000000
+
+        private const int QOI_MAGIC = 'q' << 24 | 'o' << 16 | 'i' << 8 | 'f';
+        private const int QOI_HEADER_SIZE = 14;
+
+        private const uint QOI_PIXELS_MAX = 400000000;
+
+        private const byte QOI_PADDING_LENGTH = 8;
+#pragma warning restore SA1310 // Field names should not contain underscore
+
+        private record struct QoiPixel(byte R, byte G, byte B, byte A)
+        {
+            public readonly int GetColorHash() => (R * 3) + (G * 5) + (B * 7) + (A * 11);
+        }
+
+        /// <summary>
+        /// Creates a <see cref="Bitmap"/> from the specified QOI data stream.
+        /// </summary>
+        /// <param name="stream">A <see cref="Stream"/> that contains the QOI data.</param>
+        /// <returns>The <see cref="Bitmap"/> this method creates.</returns>
+        /// <exception cref="ArgumentException">The stream does not have a valid QOI image format.</exception>
+        public static Bitmap FromStream(Stream stream)
+        {
+            var fileSize = stream.Length;
+
+            if (fileSize < QOI_HEADER_SIZE + QOI_PADDING_LENGTH)
+            {
+                throw new ArgumentException("Not enough data for a QOI file");
+            }
+
+            Bitmap? bitmap = null;
+
+            try
+            {
+                using var reader = new BinaryReader(stream, Encoding.UTF8, true);
+
+                var headerMagic = ReadUInt32BigEndian(reader);
+
+                if (headerMagic != QOI_MAGIC)
+                {
+                    throw new ArgumentException("Invalid QOI file header");
+                }
+
+                var width = ReadUInt32BigEndian(reader);
+                var height = ReadUInt32BigEndian(reader);
+                var channels = reader.ReadByte();
+                var colorSpace = reader.ReadByte();
+
+                if (width == 0 || height == 0 || channels < 3 || channels > 4 || colorSpace > 1 || height >= QOI_PIXELS_MAX / width)
+                {
+                    throw new ArgumentException("Invalid QOI file data");
+                }
+
+                var pixelFormat = channels == 4 ? PixelFormat.Format32bppArgb : PixelFormat.Format24bppRgb;
+
+                bitmap = new Bitmap((int)width, (int)height, pixelFormat);
+
+                var bitmapData = bitmap.LockBits(new Rectangle(0, 0, bitmap.Width, bitmap.Height), ImageLockMode.WriteOnly, pixelFormat);
+                var dataLength = bitmapData.Height * bitmapData.Stride;
+
+                var index = new QoiPixel[64];
+                var pixel = new QoiPixel(0, 0, 0, 255);
+
+                var run = 0;
+                var chunksLen = fileSize - QOI_PADDING_LENGTH;
+
+                for (var dataIndex = 0; dataIndex < dataLength; dataIndex += channels)
+                {
+                    if (run > 0)
+                    {
+                        run--;
+                    }
+                    else if (stream.Position < chunksLen)
+                    {
+                        var b1 = reader.ReadByte();
+
+                        if (b1 == QOI_OP_RGB)
+                        {
+                            pixel.R = reader.ReadByte();
+                            pixel.G = reader.ReadByte();
+                            pixel.B = reader.ReadByte();
+                        }
+                        else if (b1 == QOI_OP_RGBA)
+                        {
+                            pixel.R = reader.ReadByte();
+                            pixel.G = reader.ReadByte();
+                            pixel.B = reader.ReadByte();
+                            pixel.A = reader.ReadByte();
+                        }
+                        else if ((b1 & QOI_MASK_2) == QOI_OP_INDEX)
+                        {
+                            pixel = index[b1];
+                        }
+                        else if ((b1 & QOI_MASK_2) == QOI_OP_DIFF)
+                        {
+                            pixel.R += (byte)(((b1 >> 4) & 0x03) - 2);
+                            pixel.G += (byte)(((b1 >> 2) & 0x03) - 2);
+                            pixel.B += (byte)((b1 & 0x03) - 2);
+                        }
+                        else if ((b1 & QOI_MASK_2) == QOI_OP_LUMA)
+                        {
+                            var b2 = reader.ReadByte();
+                            var vg = (b1 & 0x3f) - 32;
+                            pixel.R += (byte)(vg - 8 + ((b2 >> 4) & 0x0f));
+                            pixel.G += (byte)vg;
+                            pixel.B += (byte)(vg - 8 + (b2 & 0x0f));
+                        }
+                        else if ((b1 & QOI_MASK_2) == QOI_OP_RUN)
+                        {
+                            run = b1 & 0x3f;
+                        }
+
+                        index[pixel.GetColorHash() % 64] = pixel;
+                    }
+
+                    unsafe
+                    {
+                        var bitmapPixel = (byte*)bitmapData.Scan0 + dataIndex;
+
+                        bitmapPixel[0] = pixel.B;
+                        bitmapPixel[1] = pixel.G;
+                        bitmapPixel[2] = pixel.R;
+                        if (channels == 4)
+                        {
+                            bitmapPixel[3] = pixel.A;
+                        }
+                    }
+                }
+
+                bitmap.UnlockBits(bitmapData);
+
+                return bitmap;
+            }
+            catch
+            {
+                bitmap?.Dispose();
+
+                throw;
+            }
+        }
+
+        private static uint ReadUInt32BigEndian(BinaryReader reader)
+        {
+            var buffer = reader.ReadBytes(4);
+
+            return BinaryPrimitives.ReadUInt32BigEndian(buffer);
+        }
+    }
+}

src/common/GPOWrapper/GPOWrapper.cpp

@@ -12,6 +12,10 @@ namespace winrt::PowerToys::GPOWrapper::implementation
     {
         return static_cast<GpoRuleConfigured>(powertoys_gpo::getConfiguredAwakeEnabledValue());
     }
+    GpoRuleConfigured GPOWrapper::GetConfiguredCmdNotFoundEnabledValue()
+    {
+        return static_cast<GpoRuleConfigured>(powertoys_gpo::getConfiguredCmdNotFoundEnabledValue());
+    }
     GpoRuleConfigured GPOWrapper::GetConfiguredColorPickerEnabledValue()
     {
         return static_cast<GpoRuleConfigured>(powertoys_gpo::getConfiguredColorPickerEnabledValue());
@@ -152,4 +156,12 @@ namespace winrt::PowerToys::GPOWrapper::implementation
     {
         return static_cast<GpoRuleConfigured>(powertoys_gpo::getConfiguredEnvironmentVariablesEnabledValue());
     }
+    GpoRuleConfigured GPOWrapper::GetConfiguredQoiPreviewEnabledValue()
+    {
+        return static_cast<GpoRuleConfigured>(powertoys_gpo::getConfiguredQoiPreviewEnabledValue());
+    }
+    GpoRuleConfigured GPOWrapper::GetConfiguredQoiThumbnailsEnabledValue()
+    {
+        return static_cast<GpoRuleConfigured>(powertoys_gpo::getConfiguredQoiThumbnailsEnabledValue());
+    }
 }

src/common/GPOWrapper/GPOWrapper.h

@@ -9,6 +9,7 @@ namespace winrt::PowerToys::GPOWrapper::implementation
         GPOWrapper() = default;
         static GpoRuleConfigured GetConfiguredAlwaysOnTopEnabledValue();
         static GpoRuleConfigured GetConfiguredAwakeEnabledValue();
+        static GpoRuleConfigured GetConfiguredCmdNotFoundEnabledValue();
         static GpoRuleConfigured GetConfiguredColorPickerEnabledValue();
         static GpoRuleConfigured GetConfiguredCropAndLockEnabledValue();
         static GpoRuleConfigured GetConfiguredFancyZonesEnabledValue();
@@ -44,6 +45,8 @@ namespace winrt::PowerToys::GPOWrapper::implementation
         static GpoRuleConfigured GetAllowExperimentationValue();
         static GpoRuleConfigured GetRunPluginEnabledValue(winrt::hstring const& pluginID);
         static GpoRuleConfigured GetConfiguredEnvironmentVariablesEnabledValue();
+        static GpoRuleConfigured GetConfiguredQoiPreviewEnabledValue();
+        static GpoRuleConfigured GetConfiguredQoiThumbnailsEnabledValue();
     };
 }
 

src/common/GPOWrapper/GPOWrapper.idl

@@ -13,6 +13,7 @@ namespace PowerToys
         [default_interface] static runtimeclass GPOWrapper {
             static GpoRuleConfigured GetConfiguredAlwaysOnTopEnabledValue();
             static GpoRuleConfigured GetConfiguredAwakeEnabledValue();
+            static GpoRuleConfigured GetConfiguredCmdNotFoundEnabledValue();
             static GpoRuleConfigured GetConfiguredColorPickerEnabledValue();
             static GpoRuleConfigured GetConfiguredCropAndLockEnabledValue();
             static GpoRuleConfigured GetConfiguredFancyZonesEnabledValue();
@@ -48,6 +49,8 @@ namespace PowerToys
             static GpoRuleConfigured GetAllowExperimentationValue();
             static GpoRuleConfigured GetRunPluginEnabledValue(String pluginID);
             static GpoRuleConfigured GetConfiguredEnvironmentVariablesEnabledValue();
+            static GpoRuleConfigured GetConfiguredQoiPreviewEnabledValue();
+            static GpoRuleConfigured GetConfiguredQoiThumbnailsEnabledValue();
         }
     }
 }

src/common/GPOWrapperProjection/GPOWrapper.cs

@@ -27,6 +27,11 @@ namespace PowerToys.GPOWrapperProjection
             return (GpoRuleConfigured)PowerToys.GPOWrapper.GPOWrapper.GetConfiguredFancyZonesEnabledValue();
         }
 
+        public static GpoRuleConfigured GetConfiguredCmdNotFoundEnabledValue()
+        {
+            return (GpoRuleConfigured)PowerToys.GPOWrapper.GPOWrapper.GetConfiguredCmdNotFoundEnabledValue();
+        }
+
         public static GpoRuleConfigured GetConfiguredColorPickerEnabledValue()
         {
             return (GpoRuleConfigured)PowerToys.GPOWrapper.GPOWrapper.GetConfiguredColorPickerEnabledValue();

src/common/GPOWrapperProjection/GPOWrapperProjection.csproj

@@ -1,7 +1,7 @@
 <Project Sdk="Microsoft.NET.Sdk">
   <Import Project="..\..\Version.props" />
   <PropertyGroup>
-    <TargetFramework>net7.0-windows10.0.20348.0</TargetFramework>
+    <TargetFramework>net8.0-windows10.0.20348.0</TargetFramework>
     <TargetPlatformMinVersion>10.0.19041.0</TargetPlatformMinVersion>
     <SupportedOSPlatformVersion>10.0.19041.0</SupportedOSPlatformVersion>
     <ImplicitUsings>enable</ImplicitUsings>

src/common/ManagedCommon/ColorFormatHelper.cs

@@ -328,13 +328,13 @@ namespace ManagedCommon
                 char paramFormat;
                 string paramType = formatString.Substring(formatterPosition + 1, 2);
                 int paramCount = 3;
-                if (DefaultFormatTypes.ContainsKey(paramType))
+                if (DefaultFormatTypes.TryGetValue(paramType, out char value))
                 {
                     // check the next char, which could be a formatter
                     if (formatterPosition >= formatString.Length - 3)
                     {
                         // not enough characters, end of string, no formatter, use the default one
-                        paramFormat = DefaultFormatTypes[paramType];
+                        paramFormat = value;
                         paramCount = 2;
                     }
                     else
@@ -344,7 +344,7 @@ namespace ManagedCommon
                         // check if it a valid formatter
                         if (!FormatTypeToStringFormatters.ContainsKey(paramFormat))
                         {
-                            paramFormat = DefaultFormatTypes[paramType];
+                            paramFormat = value;
                             paramCount = 2;
                         }
                     }

src/common/ManagedCommon/ManagedCommon.csproj

@@ -3,8 +3,8 @@
   <Import Project="..\..\Version.props" />
 
   <PropertyGroup>
-    <TargetFramework>net7.0-windows</TargetFramework>
-	<RuntimeIdentifiers>win-x64;win-arm64</RuntimeIdentifiers>
+    <TargetFramework>net8.0-windows</TargetFramework>
+    <RuntimeIdentifiers>win-x64;win-arm64</RuntimeIdentifiers>
     <Version>$(Version).0</Version>
     <Authors>Microsoft Corporation</Authors>
     <Product>PowerToys</Product>

src/common/ManagedCommon/ModuleType.cs

@@ -9,6 +9,7 @@ namespace ManagedCommon
         AlwaysOnTop,
         Awake,
         ColorPicker,
+        CmdNotFound,
         CropAndLock,
         EnvironmentVariables,
         FancyZones,

src/common/ManagedTelemetry/Telemetry/ManagedTelemetry.csproj

@@ -2,7 +2,7 @@
 
   <Import Project="..\..\..\Version.props" />
   <PropertyGroup>
-    <TargetFramework>net7.0-windows</TargetFramework>
+    <TargetFramework>net8.0-windows</TargetFramework>
 	<RuntimeIdentifiers>win-x64;win-arm64</RuntimeIdentifiers>
     <Version>$(Version).0</Version>
     <Authors>Microsoft Corporation</Authors>

src/common/interop/PowerToys.Interop.vcxproj

@@ -25,7 +25,7 @@
   <PropertyGroup Label="Globals">
     <VCProjectVersion>16.0</VCProjectVersion>
     <ProjectGuid>{F055103B-F80B-4D0C-BF48-057C55620033}</ProjectGuid>
-    <TargetFramework>net7.0-windows</TargetFramework>
+    <TargetFramework>net8.0-windows</TargetFramework>
     <Keyword>ManagedCProj</Keyword>
     <RootNamespace>PowerToysInterop</RootNamespace>
     <ProjectName>PowerToys.Interop</ProjectName>

src/common/interop/interop-tests/Microsoft.Interop.Tests.csproj

@@ -2,7 +2,7 @@
   <Import Project="..\..\..\Version.props" />
 
   <PropertyGroup>
-    <TargetFramework>net7.0-windows</TargetFramework>
+    <TargetFramework>net8.0-windows</TargetFramework>
     <IsPackable>false</IsPackable>
 
     <RuntimeIdentifiers>win-x64;win-arm64</RuntimeIdentifiers>

src/common/interop/interop.cpp

@@ -235,6 +235,10 @@ public
             return gcnew String(CommonSharedConstants::GCODE_PREVIEW_RESIZE_EVENT);
         }
 
+        static String ^ QoiPreviewResizeEvent() {
+            return gcnew String(CommonSharedConstants::QOI_PREVIEW_RESIZE_EVENT);
+        }
+
         static String ^ DevFilesPreviewResizeEvent() {
             return gcnew String(CommonSharedConstants::DEV_FILES_PREVIEW_RESIZE_EVENT);
         }

src/common/interop/shared_constants.h

@@ -62,6 +62,9 @@ namespace CommonSharedConstants
     // Path to the event used by GcodePreviewHandler
     const wchar_t GCODE_PREVIEW_RESIZE_EVENT[] = L"Local\\PowerToysGcodePreviewResizeEvent-6ff1f9bd-ccbd-4b24-a79f-40a34fb0317d";
 
+    // Path to the event used by QoiPreviewHandler
+    const wchar_t QOI_PREVIEW_RESIZE_EVENT[] = L"Local\\PowerToysQoiPreviewResizeEvent-579518d1-8c8b-494f-8143-04f43d761ead";
+
     // Path to the event used by DevFilesPreviewHandler
     const wchar_t DEV_FILES_PREVIEW_RESIZE_EVENT[] = L"Local\\PowerToysDevFilesPreviewResizeEvent-5707a22c-2cac-4ea2-82f0-27c03ef0b5f3";
 

src/common/logger/logger_settings.h

@@ -27,6 +27,10 @@ struct LogSettings
     inline const static std::wstring pdfPrevLogPath = L"logs\\FileExplorer_localLow\\PdfPrevHandler\\pdf-prev-handler-log.txt";
     inline const static std::string pdfThumbLoggerName = "PdfThumbnailProvider";
     inline const static std::wstring pdfThumbLogPath = L"logs\\FileExplorer_localLow\\PdfThumbnailProvider\\pdf-thumbnail-provider-log.txt";
+    inline const static std::string qoiPrevLoggerName = "QoiPrevHandler";
+    inline const static std::wstring qoiPrevLogPath = L"logs\\FileExplorer_localLow\\QoiPreviewHandler\\qoi-prev-handler-log.txt";
+    inline const static std::string qoiThumbLoggerName = "QoiThumbnailProvider";
+    inline const static std::wstring qoiThumbLogPath = L"logs\\FileExplorer_localLow\\QoiThumbnailProvider\\qoi-thumbnail-provider-log.txt";
     inline const static std::string stlThumbLoggerName = "StlThumbnailProvider";
     inline const static std::wstring stlThumbLogPath = L"logs\\FileExplorer_localLow\\StlThumbnailProvider\\stl-thumbnail-provider-log.txt";
     inline const static std::string svgPrevLoggerName = "SvgPrevHandler";
@@ -63,6 +67,8 @@ struct LogSettings
     inline const static std::string cropAndLockLoggerName = "crop-and-lock";
     inline const static std::wstring registryPreviewLogPath = L"Logs\\registryPreview-log.txt";
     inline const static std::string environmentVariablesLoggerName = "environment-variables";
+    inline const static std::wstring cmdNotFoundLogPath = L"Logs\\cmd-not-found-log.txt";
+    inline const static std::string cmdNotFoundLoggerName = "cmd-not-found";
     inline const static int retention = 30;
     std::wstring logLevel;
     LogSettings();

src/common/notifications/NotificationUtil.h

@@ -0,0 +1,40 @@
+#pragma once
+
+#include <common/notifications/notifications.h>
+#include <common/notifications/dont_show_again.h>
+#include <common/utils/resources.h>
+#include <common/SettingsAPI/settings_helpers.h>
+
+#include "Generated Files/resource.h"
+
+namespace notifications
+{
+    // Non-Localizable strings
+    namespace NonLocalizable
+    {
+        const wchar_t RunAsAdminInfoPage[] = L"https://aka.ms/powertoysDetectedElevatedHelp";
+        const wchar_t ToastNotificationButtonUrl[] = L"powertoys://cant_drag_elevated_disable/";
+    }
+
+    inline void WarnIfElevationIsRequired(std::wstring title, std::wstring message, std::wstring button1, std::wstring button2)
+    {
+        using namespace NonLocalizable;
+
+        auto settings = PTSettingsHelper::load_general_settings();
+        auto enableWarningsElevatedApps = settings.GetNamedBoolean(L"enable_warnings_elevated_apps", true);
+
+        static bool warning_shown = false;
+        if (enableWarningsElevatedApps && !warning_shown && !is_toast_disabled(ElevatedDontShowAgainRegistryPath, ElevatedDisableIntervalInDays))
+        {
+            std::vector<action_t> actions = {
+                link_button{ button1, RunAsAdminInfoPage },
+                link_button{ button2, ToastNotificationButtonUrl }
+            };
+            show_toast_with_activations(message,
+                                        title,
+                                        {},
+                                        std::move(actions));
+            warning_shown = true;
+        }
+    }
+}

src/common/notifications/dont_show_again.h

@@ -4,8 +4,8 @@
 
 namespace notifications
 {
-    const inline wchar_t CantDragElevatedDontShowAgainRegistryPath[] = LR"(SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\DontShowMeThisDialogAgain\{e16ea82f-6d94-4f30-bb02-d6d911588afd})";
-    const inline int64_t CantDragElevatedDisableIntervalInDays = 30;
+    const inline wchar_t ElevatedDontShowAgainRegistryPath[] = LR"(SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\DontShowMeThisDialogAgain\{e16ea82f-6d94-4f30-bb02-d6d911588afd})";
+    const inline int64_t ElevatedDisableIntervalInDays = 30;
 
     const inline wchar_t PreviewModulesDontShowAgainRegistryPath[] = LR"(SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\DontShowMeThisDialogAgain\{7e29e2b2-b31c-4dcd-b7b0-79c078b02430})";
     const inline int64_t PreviewModulesDisableIntervalInDays = 30;

src/common/notifications/notifications.vcxproj

@@ -27,6 +27,7 @@
   </ItemDefinitionGroup>
   <ItemGroup>
     <ClInclude Include="notifications.h" />
+    <ClInclude Include="NotificationUtil.h" />
     <ClInclude Include="dont_show_again.h" />
     <ClInclude Include="pch.h" />
   </ItemGroup>

src/common/updating/pch.h

@@ -3,9 +3,10 @@
 #ifndef PCH_H
 #define PCH_H
 
+#pragma warning(push)
 #pragma warning(disable : 5205)
 #include <winrt/base.h>
-#pragma warning(default : 5205)
+#pragma warning(pop)
 #define WIN32_LEAN_AND_MEAN
 #define NOMINMAX
 #include <Windows.h>

src/common/utils/elevation.h

@@ -494,3 +494,30 @@ inline bool check_user_is_admin()
     freeMemory(pSID, pGroupInfo);
     return false;
 }
+
+inline bool IsProcessOfWindowElevated(HWND window)
+{
+    DWORD pid = 0;
+    GetWindowThreadProcessId(window, &pid);
+    if (!pid)
+    {
+        return false;
+    }
+
+    wil::unique_handle hProcess{ OpenProcess(PROCESS_QUERY_LIMITED_INFORMATION,
+                                             FALSE,
+                                             pid) };
+
+    wil::unique_handle token;
+
+    if (OpenProcessToken(hProcess.get(), TOKEN_QUERY, &token))
+    {
+        TOKEN_ELEVATION elevation;
+        DWORD size;
+        if (GetTokenInformation(token.get(), TokenElevation, &elevation, sizeof(elevation), &size))
+        {
+            return elevation.TokenIsElevated != 0;
+        }
+    }
+    return false;
+}

src/common/utils/excluded_apps.h

@@ -32,7 +32,7 @@ inline bool find_folder_in_path(const std::wstring& where, const std::vector<std
 }
 
 #define MAX_TITLE_LENGTH 255
-inline bool check_excluded_app_with_title(const HWND& hwnd, std::wstring& processPath, const std::vector<std::wstring>& excludedApps)
+inline bool check_excluded_app_with_title(const HWND& hwnd, const std::vector<std::wstring>& excludedApps)
 {
     WCHAR title[MAX_TITLE_LENGTH];
     int len = GetWindowTextW(hwnd, title, MAX_TITLE_LENGTH);
@@ -42,23 +42,25 @@ inline bool check_excluded_app_with_title(const HWND& hwnd, std::wstring& proces
     }
 
     std::wstring titleStr(title);
-    auto lastBackslashPos = processPath.find_last_of(L'\\');
-    if (lastBackslashPos != std::wstring::npos)
+    CharUpperBuffW(titleStr.data(), static_cast<DWORD>(titleStr.length()));
+
+    for (const auto& app : excludedApps)
     {
-        processPath = processPath.substr(0, lastBackslashPos + 1); // retain up to the last backslash
-        processPath.append(titleStr); // append the title
+        if (titleStr.contains(app))
+        {
+            return true;
+        }
     }
-    CharUpperBuffW(processPath.data(), static_cast<DWORD>(processPath.length()));
-    return find_app_name_in_path(processPath, excludedApps);
+    return false;
 }
 
-inline bool check_excluded_app(const HWND& hwnd, std::wstring& processPath, const std::vector<std::wstring>& excludedApps)
+inline bool check_excluded_app(const HWND& hwnd, const std::wstring& processPath, const std::vector<std::wstring>& excludedApps)
 {
     bool res = find_app_name_in_path(processPath, excludedApps);
 
     if (!res)
     {
-        res = check_excluded_app_with_title(hwnd, processPath, excludedApps);
+        res = check_excluded_app_with_title(hwnd, excludedApps);
     }
 
     return res;

src/common/utils/gpo.h

@@ -24,6 +24,7 @@ namespace powertoys_gpo {
     const std::wstring POLICY_CONFIGURE_ENABLED_GLOBAL_ALL_UTILITIES = L"ConfigureGlobalUtilityEnabledState";
     const std::wstring POLICY_CONFIGURE_ENABLED_ALWAYS_ON_TOP = L"ConfigureEnabledUtilityAlwaysOnTop";
     const std::wstring POLICY_CONFIGURE_ENABLED_AWAKE = L"ConfigureEnabledUtilityAwake";
+    const std::wstring POLICY_CONFIGURE_ENABLED_CMD_NOT_FOUND = L"ConfigureEnabledUtilityCmdNotFound";
     const std::wstring POLICY_CONFIGURE_ENABLED_COLOR_PICKER = L"ConfigureEnabledUtilityColorPicker";
     const std::wstring POLICY_CONFIGURE_ENABLED_CROP_AND_LOCK = L"ConfigureEnabledUtilityCropAndLock";
     const std::wstring POLICY_CONFIGURE_ENABLED_FANCYZONES = L"ConfigureEnabledUtilityFancyZones";
@@ -56,6 +57,8 @@ namespace powertoys_gpo {
     const std::wstring POLICY_CONFIGURE_ENABLED_MOUSE_WITHOUT_BORDERS = L"ConfigureEnabledUtilityMouseWithoutBorders";
     const std::wstring POLICY_CONFIGURE_ENABLED_PEEK = L"ConfigureEnabledUtilityPeek";
     const std::wstring POLICY_CONFIGURE_ENABLED_ENVIRONMENT_VARIABLES = L"ConfigureEnabledUtilityEnvironmentVariables";
+    const std::wstring POLICY_CONFIGURE_ENABLED_QOI_PREVIEW = L"ConfigureEnabledUtilityFileExplorerQOIPreview";
+    const std::wstring POLICY_CONFIGURE_ENABLED_QOI_THUMBNAILS = L"ConfigureEnabledUtilityFileExplorerQOIThumbnails";
 
     // The registry value names for PowerToys installer and update policies.
     const std::wstring POLICY_DISABLE_PER_USER_INSTALLATION = L"PerUserInstallationDisabled";
@@ -222,6 +225,11 @@ namespace powertoys_gpo {
         return getUtilityEnabledValue(POLICY_CONFIGURE_ENABLED_AWAKE);
     }
 
+    inline gpo_rule_configured_t getConfiguredCmdNotFoundEnabledValue()
+    {
+        return getUtilityEnabledValue(POLICY_CONFIGURE_ENABLED_CMD_NOT_FOUND);
+    }
+
     inline gpo_rule_configured_t getConfiguredColorPickerEnabledValue()
     {
         return getUtilityEnabledValue(POLICY_CONFIGURE_ENABLED_COLOR_PICKER);
@@ -366,7 +374,7 @@ namespace powertoys_gpo {
     {
         return getUtilityEnabledValue(POLICY_CONFIGURE_ENABLED_MOUSE_WITHOUT_BORDERS);
     }
-    
+
     inline gpo_rule_configured_t getConfiguredPeekEnabledValue()
     {
         return getUtilityEnabledValue(POLICY_CONFIGURE_ENABLED_PEEK);
@@ -446,4 +454,14 @@ namespace powertoys_gpo {
             return getConfiguredValue(POLICY_CONFIGURE_ENABLED_POWER_LAUNCHER_ALL_PLUGINS);
         }        
     }
+
+    inline gpo_rule_configured_t getConfiguredQoiPreviewEnabledValue()
+    {
+        return getUtilityEnabledValue(POLICY_CONFIGURE_ENABLED_QOI_PREVIEW);
+    }
+
+    inline gpo_rule_configured_t getConfiguredQoiThumbnailsEnabledValue()
+    {
+        return getUtilityEnabledValue(POLICY_CONFIGURE_ENABLED_QOI_THUMBNAILS);
+    }
 }

src/common/utils/modulesRegistry.h

@@ -18,7 +18,8 @@ namespace NonLocalizable
     const static std::vector<std::wstring> ExtPDF      = { L".pdf" };
     const static std::vector<std::wstring> ExtGCode    = { L".gcode" };
     const static std::vector<std::wstring> ExtSTL      = { L".stl" };
-    const static std::vector<std::wstring> ExtNoNoNo   = { 
+    const static std::vector<std::wstring> ExtQOI      = { L".qoi" };
+    const static std::vector<std::wstring> ExtNoNoNo   = {
         L".svgz" //Monaco cannot handle this file type at all; it's a binary file.
     };
 }
@@ -145,6 +146,19 @@ inline registry::ChangeSet getGcodePreviewHandlerChangeSet(const std::wstring in
                                   NonLocalizable::ExtGCode);
 }
 
+inline registry::ChangeSet getQoiPreviewHandlerChangeSet(const std::wstring installationDir, const bool perUser)
+{
+    using namespace registry::shellex;
+    return generatePreviewHandler(PreviewHandlerType::preview,
+                                  perUser,
+                                  L"{729B72CD-B72E-4FE9-BCBF-E954B33FE699}",
+                                  get_std_product_version(),
+                                  (fs::path{ installationDir } / LR"d(PowerToys.QoiPreviewHandlerCpp.dll)d").wstring(),
+                                  L"QoiPreviewHandler",
+                                  L"Qoi Preview Handler",
+                                  NonLocalizable::ExtQOI);
+}
+
 inline registry::ChangeSet getSvgThumbnailHandlerChangeSet(const std::wstring installationDir, const bool perUser)
 {
     using namespace registry::shellex;
@@ -156,6 +170,7 @@ inline registry::ChangeSet getSvgThumbnailHandlerChangeSet(const std::wstring in
                                   L"SvgThumbnailProvider",
                                   L"Svg Thumbnail Provider",
                                   NonLocalizable::ExtSVG,
+                                  L"image",
                                   L"Picture");
 }
 
@@ -198,6 +213,21 @@ inline registry::ChangeSet getStlThumbnailHandlerChangeSet(const std::wstring in
                                   NonLocalizable::ExtSTL);
 }
 
+inline registry::ChangeSet getQoiThumbnailHandlerChangeSet(const std::wstring installationDir, const bool perUser)
+{
+    using namespace registry::shellex;
+    return generatePreviewHandler(PreviewHandlerType::thumbnail,
+                                  perUser,
+                                  L"{AD856B15-D25E-4008-AFB7-AFAA55586188}",
+                                  get_std_product_version(),
+                                  (fs::path{ installationDir } / LR"d(PowerToys.QoiThumbnailProviderCpp.dll)d").wstring(),
+                                  L"QoiThumbnailProvider",
+                                  L"Qoi Thumbnail Provider",
+                                  NonLocalizable::ExtQOI,
+                                  L"image",
+                                  L"Picture");
+}
+
 inline registry::ChangeSet getRegistryPreviewSetDefaultAppChangeSet(const std::wstring installationDir, const bool perUser)
 {
     const HKEY scope = perUser ? HKEY_CURRENT_USER : HKEY_LOCAL_MACHINE;
@@ -245,9 +275,11 @@ inline std::vector<registry::ChangeSet> getAllOnByDefaultModulesChangeSets(const
              getMdPreviewHandlerChangeSet(installationDir, PER_USER),
              getMonacoPreviewHandlerChangeSet(installationDir, PER_USER),
              getGcodePreviewHandlerChangeSet(installationDir, PER_USER),
+             getQoiPreviewHandlerChangeSet(installationDir, PER_USER),
              getSvgThumbnailHandlerChangeSet(installationDir, PER_USER),
              getGcodeThumbnailHandlerChangeSet(installationDir, PER_USER),
              getStlThumbnailHandlerChangeSet(installationDir, PER_USER),
+             getQoiThumbnailHandlerChangeSet(installationDir, PER_USER),
              getRegistryPreviewChangeSet(installationDir, PER_USER) };
 }
 
@@ -259,10 +291,12 @@ inline std::vector<registry::ChangeSet> getAllModulesChangeSets(const std::wstri
              getMonacoPreviewHandlerChangeSet(installationDir, PER_USER),
              getPdfPreviewHandlerChangeSet(installationDir, PER_USER),
              getGcodePreviewHandlerChangeSet(installationDir, PER_USER),
+             getQoiPreviewHandlerChangeSet(installationDir, PER_USER),
              getSvgThumbnailHandlerChangeSet(installationDir, PER_USER),
              getPdfThumbnailHandlerChangeSet(installationDir, PER_USER),
              getGcodeThumbnailHandlerChangeSet(installationDir, PER_USER),
              getStlThumbnailHandlerChangeSet(installationDir, PER_USER),
+             getQoiThumbnailHandlerChangeSet(installationDir, PER_USER),
              getRegistryPreviewChangeSet(installationDir, PER_USER),
              getRegistryPreviewSetDefaultAppChangeSet(installationDir, PER_USER) };
 }

src/common/utils/registry.h

@@ -395,6 +395,7 @@ namespace registry
                                                           std::wstring className,
                                                           std::wstring displayName,
                                                           std::vector<std::wstring> fileTypes,
+                                                          std::wstring perceivedType = L"",
                                                           std::wstring fileKindType = L"")
         {
             const HKEY scope = perUser ? HKEY_CURRENT_USER : HKEY_LOCAL_MACHINE;
@@ -436,9 +437,8 @@ namespace registry
 
             for (const auto& fileType : fileTypes)
             {
-                std::wstring fileAssociationPath = L"Software\\Classes\\";
-                fileAssociationPath += fileType;
-                fileAssociationPath += L"\\shellex\\";
+                std::wstring fileTypePath = L"Software\\Classes\\" + fileType;
+                std::wstring fileAssociationPath = fileTypePath + L"\\shellex\\";
                 fileAssociationPath += handlerType == PreviewHandlerType::preview ? IPREVIEW_HANDLER_CLSID : ITHUMBNAIL_PROVIDER_CLSID;
                 changes.push_back({ scope, fileAssociationPath, std::nullopt, handlerClsid });
                 if (!fileKindType.empty())
@@ -448,6 +448,10 @@ namespace registry
                     std::wstring kindMapPath = L"Software\\Microsoft\\Windows\\CurrentVersion\\Explorer\\KindMap";
                     changes.push_back({ HKEY_LOCAL_MACHINE, kindMapPath, fileType, fileKindType, false});
                 }
+                if (!perceivedType.empty())
+                {
+                    changes.push_back({ scope, fileTypePath, L"PerceivedType", perceivedType });
+                }
                 if (handlerType == PreviewHandlerType::preview && fileType == L".reg")
                 {
                     // this regfile registry key has precedence over Software\Classes\.reg for .reg files

src/common/utils/window.h

@@ -6,9 +6,13 @@
 
 #include <array>
 #include <optional>
+#include <functional>
+#include <unordered_map>
 
 // Initializes and runs windows message loop
-inline int run_message_loop(const bool until_idle = false, const std::optional<uint32_t> timeout_ms = {})
+inline int run_message_loop(const bool until_idle = false,
+                            const std::optional<uint32_t> timeout_ms = {},
+                            std::unordered_map<DWORD, std::function<void()>> wm_app_msg_callbacks = {})
 {
     MSG msg{};
     bool stop = false;
@@ -24,11 +28,16 @@ inline int run_message_loop(const bool until_idle = false, const std::optional<u
         DispatchMessageW(&msg);
         stop = until_idle && !PeekMessageW(&msg, nullptr, 0, 0, PM_NOREMOVE);
         stop = stop || (msg.message == WM_TIMER && msg.wParam == timerId);
+
+        if (auto it = wm_app_msg_callbacks.find(msg.message); it != end(wm_app_msg_callbacks))
+            it->second();
     }
+
     if (timeout_ms.has_value())
     {
         KillTimer(nullptr, timerId);
     }
+
     return static_cast<int>(msg.wParam);
 }
 
@@ -60,7 +69,7 @@ template<typename T>
 inline T GetWindowCreateParam(LPARAM lparam)
 {
     static_assert(sizeof(T) <= sizeof(void*));
-    T data{ static_cast <T>(reinterpret_cast<CREATESTRUCT*>(lparam)->lpCreateParams) };
+    T data{ static_cast<T>(reinterpret_cast<CREATESTRUCT*>(lparam)->lpCreateParams) };
     return data;
 }
 
@@ -74,5 +83,5 @@ inline void StoreWindowParam(HWND window, T data)
 template<typename T>
 inline T GetWindowParam(HWND window)
 {
-    return reinterpret_cast <T>(GetWindowLongPtrW(window, GWLP_USERDATA));
+    return reinterpret_cast<T>(GetWindowLongPtrW(window, GWLP_USERDATA));
 }

src/common/version/version.h

@@ -13,7 +13,7 @@
 #define PRODUCT_VERSION_STRING FILE_VERSION_STRING
 
 #define COMPANY_NAME "Microsoft Corporation"
-#define COPYRIGHT_NOTE "Copyright (C) 2023 Microsoft Corporation"
+#define COPYRIGHT_NOTE "Copyright (C) 2024 Microsoft Corporation"
 #define PRODUCT_NAME "PowerToys"
 
 #include <string>

src/gpo/assets/PowerToys.admx

@@ -1,11 +1,11 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!-- Copyright (c) Microsoft Corporation.
      Licensed under the MIT License. -->
-<policyDefinitions xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" revision="1.5" schemaVersion="1.0" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
+<policyDefinitions xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" revision="1.7" schemaVersion="1.0" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
   <policyNamespaces>
     <target prefix="powertoys" namespace="Microsoft.Policies.PowerToys" />
   </policyNamespaces>
-  <resources minRequiredRevision="1.5"/><!-- Last changed with PowerToys v0.75.1 -->
+  <resources minRequiredRevision="1.7"/><!-- Last changed with PowerToys v0.77.0 -->
   <supportedOn>
     <definitions>
       <definition name="SUPPORTED_POWERTOYS_0_64_0" displayName="$(string.SUPPORTED_POWERTOYS_0_64_0)"/>
@@ -14,6 +14,8 @@
       <definition name="SUPPORTED_POWERTOYS_0_70_0" displayName="$(string.SUPPORTED_POWERTOYS_0_70_0)"/>
       <definition name="SUPPORTED_POWERTOYS_0_73_0" displayName="$(string.SUPPORTED_POWERTOYS_0_73_0)"/>
       <definition name="SUPPORTED_POWERTOYS_0_75_0" displayName="$(string.SUPPORTED_POWERTOYS_0_75_0)"/>
+      <definition name="SUPPORTED_POWERTOYS_0_76_0" displayName="$(string.SUPPORTED_POWERTOYS_0_76_0)"/>
+      <definition name="SUPPORTED_POWERTOYS_0_77_0" displayName="$(string.SUPPORTED_POWERTOYS_0_77_0)"/>
     </definitions>
   </supportedOn>
   <categories>
@@ -58,6 +60,16 @@
         <decimal value="0" />
       </disabledValue>
     </policy>
+    <policy name="ConfigureEnabledUtilityCmdNotFound" class="Both" displayName="$(string.ConfigureEnabledUtilityCmdNotFound)" explainText="$(string.ConfigureEnabledUtilityDescription)" key="Software\Policies\PowerToys" valueName="ConfigureEnabledUtilityCmdNotFound">
+      <parentCategory ref="PowerToys" />
+      <supportedOn ref="SUPPORTED_POWERTOYS_0_77_0" />
+      <enabledValue>
+        <decimal value="1" />
+      </enabledValue>
+      <disabledValue>
+        <decimal value="0" />
+      </disabledValue>
+    </policy>
     <policy name="ConfigureEnabledUtilityColorPicker" class="Both" displayName="$(string.ConfigureEnabledUtilityColorPicker)" explainText="$(string.ConfigureEnabledUtilityDescription)" key="Software\Policies\PowerToys" valueName="ConfigureEnabledUtilityColorPicker">
       <parentCategory ref="PowerToys" />
       <supportedOn ref="SUPPORTED_POWERTOYS_0_64_0" />
@@ -188,6 +200,26 @@
         <decimal value="0" />
       </disabledValue>
     </policy>
+    <policy name="ConfigureEnabledUtilityFileExplorerQOIPreview" class="Both" displayName="$(string.ConfigureEnabledUtilityFileExplorerQOIPreview)" explainText="$(string.ConfigureEnabledUtilityDescription)" key="Software\Policies\PowerToys" valueName="ConfigureEnabledUtilityFileExplorerQOIPreview">
+      <parentCategory ref="PowerToys" />
+      <supportedOn ref="SUPPORTED_POWERTOYS_0_76_0" />
+      <enabledValue>
+        <decimal value="1" />
+      </enabledValue>
+      <disabledValue>
+        <decimal value="0" />
+      </disabledValue>
+    </policy>
+    <policy name="ConfigureEnabledUtilityFileExplorerQOIThumbnails" class="Both" displayName="$(string.ConfigureEnabledUtilityFileExplorerQOIThumbnails)" explainText="$(string.ConfigureEnabledUtilityDescription)" key="Software\Policies\PowerToys" valueName="ConfigureEnabledUtilityFileExplorerQOIThumbnails">
+      <parentCategory ref="PowerToys" />
+      <supportedOn ref="SUPPORTED_POWERTOYS_0_76_0" />
+      <enabledValue>
+        <decimal value="1" />
+      </enabledValue>
+      <disabledValue>
+        <decimal value="0" />
+      </disabledValue>
+    </policy>
     <policy name="ConfigureEnabledUtilityFileExplorerSTLThumbnails" class="Both" displayName="$(string.ConfigureEnabledUtilityFileExplorerSTLThumbnails)" explainText="$(string.ConfigureEnabledUtilityDescription)" key="Software\Policies\PowerToys" valueName="ConfigureEnabledUtilityFileExplorerSTLThumbnails">
       <parentCategory ref="PowerToys" />
       <supportedOn ref="SUPPORTED_POWERTOYS_0_64_0" />

src/gpo/assets/en-US/PowerToys.adml

@@ -1,7 +1,7 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!-- Copyright (c) Microsoft Corporation.
      Licensed under the MIT License. -->
-<policyDefinitionResources xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" revision="1.5" schemaVersion="1.0" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
+<policyDefinitionResources xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" revision="1.7" schemaVersion="1.0" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/PolicyDefinitions">
   <displayName>PowerToys</displayName>
   <description>PowerToys</description>
   <resources>
@@ -16,6 +16,8 @@
       <string id="SUPPORTED_POWERTOYS_0_70_0">PowerToys version 0.70.0 or later</string>
       <string id="SUPPORTED_POWERTOYS_0_73_0">PowerToys version 0.73.0 or later</string>
       <string id="SUPPORTED_POWERTOYS_0_75_0">PowerToys version 0.75.0 or later</string>
+      <string id="SUPPORTED_POWERTOYS_0_76_0">PowerToys version 0.76.0 or later</string>
+      <string id="SUPPORTED_POWERTOYS_0_77_0">PowerToys version 0.77.0 or later</string>
 
             <string id="ConfigureGlobalUtilityEnabledStateDescription">This policy configures the enabled state for all PowerToys utilities.
 
@@ -23,7 +25,7 @@ If you enable this setting, all utilities will be always enabled and the user wo
 
 If you disable this setting, all utilities will be always disabled and the user won't be able to enable it.
 
-If you don't configure this setting, users are able to disable or enable the utilities.
+If you don't configure this setting, users are able to enable or disable the utilities.
 
 The individual enabled state policies for the utilities will override this policy.
 </string>
@@ -34,7 +36,7 @@ If you enable this setting, the utility will be always enabled and the user won'
 
 If you disable this setting, the utility will be always disabled and the user won't be able to enable it.
 
-If you don't configure this setting, users are able to disable or enable the utility.
+If you don't configure this setting, users are able to enable or disable the utility.
 
 This policy has a higher priority than the policy "Configure global utility enabled state" and overrides it.
 </string>
@@ -46,7 +48,7 @@ If you enable this setting, the utility will be always enabled and the user won'
 
 If you disable this setting, the utility will be always disabled and the user won't be able to enable it.
 
-If you don't configure this setting, users are able to disable or enable the utility.
+If you don't configure this setting, users are able to enable or disable the utility.
 
 This policy has a higher priority than the policy "Configure global utility enabled state" and overrides it.
 </string>
@@ -78,7 +80,7 @@ If disabled or not configured, the automatic update checks are enabled.
 </string>
       <string id="AllowExperimentationDescription">This policy configures whether PowerToys experimentation is allowed. With experimentation allowed the user sees the new features being experimented if it gets selected as part of the test group. (Experimentation will only happen on Windows Insider builds.)
 
-If this setting is not configured or enabled, the user can control experimentation in the PowerToys settings menu.
+If this setting is enabled or not configured, the user can control experimentation in the PowerToys settings menu.
 
 If this setting is disabled, experimentation is not allowed.
 </string>
@@ -88,22 +90,22 @@ If you enable this setting, the plugins will be always enabled and the user won'
 
 If you disable this setting, the plugins will be always disabled and the user won't be able to enable it.
 
-If you don't configure this setting, users are able to disable or enable the plugins.
+If you don't configure this setting, users are able to enable or disable the plugins.
 
 You can override this policy for individual plugins using the policy "Configure enabled state for individual plugins".
 
 Note: Changes require a restart of PowerToys Run.
 </string>
-      <string id="PowerToysRunIndividualPluginEnabledStateDescription">With this policy you can configures an individual enabled state for each PowerToys Run plugin that you add to the list.
+      <string id="PowerToysRunIndividualPluginEnabledStateDescription">With this policy you can configure an individual enabled state for each PowerToys Run plugin that you add to the list.
 
 If you enable this setting, you can define the list of plugins and their enabled states:
-  - The value name (first column) is the plugin ID. You will find it in the plugin.json which is located in the plugin folder.
+  - The value name (first column) is the plugin ID. You will find it in the plugin.json file which is located in the plugin folder.
   - The value (second column) is a numeric value: 0 for disabled, 1 for enabled and 2 for user takes control.
   - Example to disable the Program plugin: 791FC278BA414111B8D1886DFE447410 | 0
 
 If you disable or don't configure this policy, either the user or the policy "Configure enabled state for all plugins" takes control over the enabled state of the plugins.
 
-You can set the enabled state for all plugins not listed here using the policy "Configure enabled state for all plugins".
+You can set the enabled state for all plugins not configured by this policy using the policy "Configure enabled state for all plugins".
 
 Note: Changes require a restart of PowerToys Run.
 </string>
@@ -111,6 +113,7 @@ Note: Changes require a restart of PowerToys Run.
       <string id="ConfigureEnabledUtilityAlwaysOnTop">Always On Top: Configure enabled state</string>
       <string id="ConfigureEnabledUtilityAwake">Awake: Configure enabled state</string>
       <string id="ConfigureEnabledUtilityColorPicker">Color Picker: Configure enabled state</string>
+      <string id="ConfigureEnabledUtilityCmdNotFound">Command Not Found: Configure enabled state</string>
       <string id="ConfigureEnabledUtilityCropAndLock">Crop And Lock: Configure enabled state</string>
       <string id="ConfigureEnabledUtilityEnvironmentVariables">Environment Variables: Configure enabled state</string>
       <string id="ConfigureEnabledUtilityFancyZones">FancyZones: Configure enabled state</string>
@@ -149,6 +152,8 @@ Note: Changes require a restart of PowerToys Run.
       <string id="AllowExperimentation">Allow Experimentation</string>
       <string id="PowerToysRunAllPluginsEnabledState">Configure enabled state for all plugins</string>
       <string id="PowerToysRunIndividualPluginEnabledState">Configure enabled state for individual plugins</string>
+      <string id="ConfigureEnabledUtilityFileExplorerQOIPreview">QOI file preview: Configure enabled state</string>
+      <string id="ConfigureEnabledUtilityFileExplorerQOIThumbnails">QOI file thumbnail: Configure enabled state</string>
     </stringTable>
 	
 	<presentationTable>

src/modules/CropAndLock/CropAndLock/main.cpp

@@ -188,7 +188,7 @@ int WINAPI wWinMain(_In_ HINSTANCE, _In_opt_ HINSTANCE, _In_ PWSTR lpCmdLine, _I
     m_reparent_event_handle = CreateEventW(nullptr, false, false, CommonSharedConstants::CROP_AND_LOCK_REPARENT_EVENT);
     m_thumbnail_event_handle = CreateEventW(nullptr, false, false, CommonSharedConstants::CROP_AND_LOCK_THUMBNAIL_EVENT);
     m_exit_event_handle = CreateEventW(nullptr, false, false, CommonSharedConstants::CROP_AND_LOCK_EXIT_EVENT);
-    if (!m_reparent_event_handle || !m_reparent_event_handle || !m_exit_event_handle)
+    if (!m_reparent_event_handle || !m_thumbnail_event_handle || !m_exit_event_handle)
     {
         Logger::warn(L"Failed to create events. {}", get_last_error_or_default(GetLastError()));
         return 1;

src/modules/EnvironmentVariables/EnvironmentVariables/EnvironmentVariables.csproj

@@ -3,12 +3,12 @@
 
   <PropertyGroup>
     <OutputType>WinExe</OutputType>
-    <TargetFramework>net7.0-windows10.0.20348.0</TargetFramework>
+    <TargetFramework>net8.0-windows10.0.20348.0</TargetFramework>
     <TargetPlatformMinVersion>10.0.19041.0</TargetPlatformMinVersion>
     <SupportedOSPlatformVersion>10.0.19041.0</SupportedOSPlatformVersion>
     <RootNamespace>EnvironmentVariables</RootNamespace>
     <ApplicationManifest>app.manifest</ApplicationManifest>
-    <RuntimeIdentifiers>win10-x64;win10-arm64</RuntimeIdentifiers>
+    <RuntimeIdentifiers>win-x64;win-arm64</RuntimeIdentifiers>
     <UseWinUI>true</UseWinUI>
     <EnableMsixTooling>true</EnableMsixTooling>
     <EnablePreviewMsixTooling>true</EnablePreviewMsixTooling>
@@ -34,10 +34,10 @@
 
   <!-- SelfContained=true requires RuntimeIdentifier to be set -->
   <PropertyGroup Condition="'$(Platform)'=='x64'">
-    <RuntimeIdentifier>win10-x64</RuntimeIdentifier>
+    <RuntimeIdentifier>win-x64</RuntimeIdentifier>
   </PropertyGroup>
   <PropertyGroup Condition="'$(Platform)'=='ARM64'">
-    <RuntimeIdentifier>win10-arm64</RuntimeIdentifier>
+    <RuntimeIdentifier>win-arm64</RuntimeIdentifier>
   </PropertyGroup>
 
   <!-- See https://learn.microsoft.com/windows/apps/develop/platform/csharp-winrt/net-projection-from-cppwinrt-component for more info -->

src/modules/EnvironmentVariables/EnvironmentVariables/EnvironmentVariablesXAML/MainWindow.xaml.cs

@@ -7,6 +7,7 @@ using System.Runtime.InteropServices;
 using EnvironmentVariables.Helpers;
 using EnvironmentVariables.Helpers.Win32;
 using EnvironmentVariables.ViewModels;
+using ManagedCommon;
 using Microsoft.UI.Dispatching;
 using WinUIEx;
 
@@ -30,19 +31,20 @@ namespace EnvironmentVariables
             Title = title;
             AppTitleTextBlock.Text = title;
 
-            RegisterWindow();
+            var handle = this.GetWindowHandle();
+            RegisterWindow(handle);
+
+            WindowHelpers.BringToForeground(handle);
         }
 
         private static readonly DispatcherQueue _dispatcherQueue = DispatcherQueue.GetForCurrentThread();
         private static NativeMethods.WinProc newWndProc;
         private static IntPtr oldWndProc = IntPtr.Zero;
 
-        private void RegisterWindow()
+        private void RegisterWindow(IntPtr handle)
         {
             newWndProc = new NativeMethods.WinProc(WndProc);
 
-            var handle = this.GetWindowHandle();
-
             oldWndProc = NativeMethods.SetWindowLongPtr(handle, NativeMethods.WindowLongIndexFlags.GWL_WNDPROC, newWndProc);
         }